Can't get my 23" vintage CD to work with my new iMac

Hi,
I have a similar problem to: https://discussions.apple.com/thread/2002962?start=0&tstart=0
I have a 23" Cinema Display (late 2005 model but bought in 2007). I want to have a 2nd display on my new 27" iMac (mid 2011).
I hooked it up using a mini-DVI to mini-Display port. Changed resolution to 1920x1200 -- did not help. In the "About" and the Display perferences, my iMac sees the cinema display, but no picture. The display has the LED light on (continuously no flashing). I keep holding the brightness + button.. doesn't help.
Please help!
Do I need more power? Got this idea from this semi-related thread:
https://discussions.apple.com/thread/2086442?start=75&tstart=0
Any help is appreciated!
thanks,
emp

I'm an idiot.. I bought a faulty miniDisplayport to DVI cable. Only was able to tell because after fidgeting with it day after day, I finally saw a flicker!
new cable and now it works
cheers

Similar Messages

How can i get my unlocked iphone 4 to work with a new pay as u go sim card

how can i get my unlocked iphone 4 to work with a new pay as u go sim card

Insert the sim card and activate the iPhone.

How can I get my hp Laserjet 1012 to work with Windows 7?

How can I get my hp Laserjet 1012 to work with Windows 7?

Here is a list of products that are not supported in the win7 OS. This product is listed there.
Products not supported in win7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

I can't get my HP laserjet p1102w to work with airprint

Hi!
So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

Hey T-racer,
As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
You can find more info on it here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
It shares many of the same capabilities of airprint but is a different program/feature.
If you have any questions, just ask!
I work with HP.

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
If you get this message:
then you need to right-click on the installer package and select 'Open' when you get this message:
If this isn't your issue you need to be more specific about what is happening.

I can't get Photoshop Elements 5.0 to work on my new PC running Windows 7 - can anyone help?

I can't get Photoshop Elements 5.0 to work on my new PC running Windows 7 - can anyone help?

It won't work. It's simply not compatible. Buy Elements 11.
Mylenium

I have a G4 Quicksilver that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new iMac?

I have a G4 Quicksilver 2001 that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new late 2013 iMac?

Also, how do I boot the G4 into FireWire Target Disk mode?
First, the G4 must be able to start to use FWTDM. If it can start, hold the t key at boot until you get a "screensaver pattern" that looks like this:
If the G4 is attached via a FireWire cable to a newer Mac with a FireWire port, the G4's hard drive will appear on the other Mac's desktop just as if it were any external drive. A USB cable won't work for FWTDM.
Just wondering if the drive in my G4, which I believe may be an ATA drive will also work in an enclosure for a SATA drive?
No. ATA (actually "PATA" or "IDE") and SATA are different interfaces. PATA external enclosures are now very hard to find. You best and least expensive option is the adaptor that BDAqua linked. One of its connectors is for PATA drives.

How can I get an HP Deskjet 882C to work with Snow Leopard?

Is there a way to get our HP Deskjet 882C to work with Snow Leopard? This printer is a workhorse, and even though it is so old, our budget and common sense say not to get rid of it.

Install the HPIJS package. This is an open source set of drivers for older printers. HP dropped support for a whole lot of printers when Snow Leopard was developed. These drivers fill the gap.
You will need to install three components - Ghostscript, Foomatic RIP and the hpijs package. They are all on the HPIJS web page. Once installed, restart your Mac, connect your printer. You will probably need to go into System Preferences > Print & Fax to select the printer and set it as your default printer. After that it works great. And it also works on Lion.

Can't get networked HP Officejet 5610 to work with MacBook

Apologies in advance if I'm covering old ground.
I just upgraded my Deskjet 832C to an Officejet 5610 All-In-One. The printer is connected to a WinXP machine and works without a hitch on three Windows PC's using print sharing. However, I've tried everything and can't get it to work with my MacBook using a wireless connection. The old 832c worked with no problem. In fact, I don't recall ever doing any setup to get it to work; it was just detected on the network and worked without any intervention on my part when I got the MacBook. With the new printer, however, it just won't print. I can go to "add printer" on the Mac and add it with no problem; the computer sees the printer on the mshome network. It's automatically set up as a "generic" printer because I don't see this particular model listed under the HP printers. But when I print, nothing happens. I think it's getting to the printer because I can open up the printer dialogue on the Windows machine and it'll show it's printer something called a "down level document" or something to that effect. But it just hangs up there and never prints. I also can't print anything from any of the Windows PC's while it's hung up on this.
Any suggestions on what I need to do. The much older 834c worked without me doing anything special, so I can believe a newer model won't work. Thanks in advance for any advice.

Thanks for the suggestions, but nothing seems to work. I've tried the 900 series driver as suggested, I've set the printer up using both the "default brower" and "ip printer" options, I've gone into Windows and checked the "TCP/IP" box in addition to the USB ports ... nothing makes any difference in the behavior. The Mac seems to be communicating with the PC because in the Windows printer dialogue box, it shows that a "remote downlevel document" is printing, but it hangs there and nothing will happen. I have to restart the Windows PC to clear the print job and can't print from any of the Windows PC's until I clear it.
Thanks again. I'll keep searching for an answer. Never thought changing to a newer, more up-to-date printer would be this much trouble.

Can't get Zip or Jaz Drive to work with PB G4 OS 10.4.7

Hi All,
Please help if possible. I recently upgraded from a PB 3400/G3, "Kanga" to a PB G4. When I used my Kanga I saved tons of files and pictures to my Iomega SCSI 1G Jaz and 100M Zip drives. I would like to transfer all this stuff to my PB G4 but nothing I have tried works...
I:
- purchased a Iomega SCSI to USB converter for my JAZ. When it is hooked up to my PB G4, after what seems like 100 years (actually about 7 minutes) it shows up on the desktop. Then after another 7 minutes it opens. Then after another 7 minutes the folder I select opens. And so on and so on. I get scared that I'm screwing up the OS...and tired of waiting so I quit the whole thing.
- purchased a USB Iomega Zip which never shows up on the desktop, does not show up in the System Profiler, and does not show up in the Disk Utility. It doesn't matter if the disk is in the Zip before the computer is turned on or inserted later.
- read FAQs on the Iomega site and tried most of their suggestions (check that on/off switch is in the on position, power on, cables connected, etc.) including remove Iomega driver (or whatever it is) and reinstall.
The one thing I have not tried is to remove the Iomega files from the system manually and then reinstall the software. I am a long time user of a Mac, but OS 10 is a mystery to me and I'm deathly afraid of removing files I need. What are the Iomega files and where are they located? Do I remove them from OS 9 and OS 10 or just from OS 10?
Oh, I forgot...I read a lot of Apple discussion items talking about removing some Adaptec files but I think they were just for PowerMac users.
What this all boils down to is, does anyone know how I can get my Zip and Jaz drives to work on my PB G4's? As you can tell, I move forward very slowly and giving up my trusted Kanga is a big step for me I'd like to be able to move between my Kanga and G4s for a while longer.
Thanks to anyone who has the patience to read thru all this stuff and provide suggestions.
Powerbook G4, 15", 1.25GHz and PB G4, 12', 1.5 GHz Mac OS X (10.4.7)

USB and Firewire Zip and Jazz drives exist which work with Mac OS X a lot better than SCSI. I would suggest selling the old SCSI one to someone who can better use it, and get yourself more up to date drives:
http://www.nextag.com/Iomega-jaz-firewire-adapter-55776971/prices-html

How can i get the Adobe plug in to work with Visio 2013?

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues visio 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

Should have purchased XI. According to Compatible web browsers and PDFMaker applications you will need Acrobat 11.0.1 -and- to be running the 32-bit Visio.

I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

Can I get a thunderbolt 27" display to work with a Mac Pro desktop? if so how?, Can I get a thunderbolt 27" display to work with a Mac Pro desktop? if so how?

How can I get a thunderbolt disply to work with a MacPro desktop???

HeadChef wrote:
How can I get a thunderbolt disply to work with a MacPro desktop???
You can't; there's no Thunderbolt port on a Mac Pro. If you just bought the display, try to swap it for the standard 27" LED display with the mini display port connector (that assumes your Mac Pro is a 3,1 or later, which has a mini display port).

Can't get duplex on Officejet 6480 to work with Mac OS 10.6.4

Recently purchased Macbook Pro 13 which makes me a new user. I have updated the OS to 10.6.4. Have installed Officejet J6480 and using wirelessly. Single page printing works fine. Can't get duplex printing to work. Checked options on printer in System Preferences and duplex capability is checked.
What do I do now?

Have you checked to see if you've installed the most recent driver?

Can't get my 23" vintage CD to work with my new iMac

Similar Messages

Maybe you are looking for