Can't get my Airport Extreme's HD to show up for TimeMachine...

Hi, I have a new Airport Extreme Simulanteous Dual Band with an external 1TB HD formatted for MacOS Journaled, etc.
I can see the disk, named "TMBkup" in the airport utility but it won't show up in my choices of HDs in the TimeMachine preferences dialog box.
Any ideas?
Thanks

Joshua wrote:
i know i've been told several times. i don't need to be scolded and i'm not trying to start a fight. i'm more flabergasted that when apple first shipped Airport Extreme, this was one of the features is boasted. I was surprised that either I completely missed this or at some point the feature set changed.
The point is, it's +*not supported.+*
Nobody here can do anything about that.
If you want to complain about it, contact Apple: http://www.apple.com/feedback/ or call AppleCare, or contact whoever sold it to you.
If you want to try to get it to work, use the link provided in my previous post.

Similar Messages

I can not get my Airport extreme to login to my Drobo exterior HD. Any thoughts?

I can not get my Airport extreme to login to my Drobo exterior HD.., although it definitely recognizes it.
Any thoughts?

First check to make sure that you have the correct versions of Apple products to do what you want. The AirPort Extreme (AEBS), needs to be the "square" version with rounded corners, not the older round, domed shaped AEBS.
Next, the AirPort Express (AX) must be the newer "n" version of the product. Check the label on the side of the AX for the model number. This needs to be Model No A 1264.
Next, using AirPort Utility on your PC, select the AEBS and click Manual Setup. Then click the Wireless tab below the icons. Make sure that a check mark is entered next to "Allow this network to be extended"
Then check the AX using Manual Setup. Click the Wireless tab to check that the setting for Wireless Mode is "Extend a wireless network" and that there is a check mark next to "Allow wireless clients"
Reference....Apple Support Document http://support.apple.com/kb/HT4259 for complete step by step instructions.

How can I get an Airport Extreme card to recognize a Nintendo DS WiFI?

With an Airport Extreme Base Station the Airport Admin Utility lets you enter the hexidecimal code for the DS (Nintendo calls this the "MAC Address".). The Airport Admin Utility will not open because I do not have a base station. My iMac is connected to the web by ethernet cable and I use this iMac as the base station for my wireless network. Where can I enter the "MAC Address" for my son's DS?
iMac G5 Mac OS X (10.4.4) 1st edition

My son got a DS for Christmas. I have the Extreme base station and I had to use WEP security and not WPA. You have to get the WEP key from the Admin software. According to the Nintendo Wifi site, the Nintendo Wi-Fi Connection USB Connector is not compatible with Macintosh so you can only use a base station. This is from the Nintendo web site:
Will I be able to use the Nintendo Wi-Fi Connection if I have a Macintosh?
As long as you have a wireless router that is compatible with the Nintendo WFC -- and almost all of them are -- then you will be able to connect to the Nintendo WFC from your home. For gamers who do not have a compatible wireless router, and do not wish to purchase one, Nintendo offers the Nintendo Wi-Fi Connection USB Connector as an alternative. Unfortunately, this device is not compatible with Macintosh systems. You can still play by connecting at a local Hotspot, or purchasing a compatible wireless router.
Hope this helps.
Andre
PowerBook 15", 1.67 GHz, 1.5 GIG RAM Mac OS X (10.4.3) G4 QuickSilver 733Mhz, G4 400 Mhz, G3 Desktop

I can't get the AirPort extreme to recognize a MagicJack connection. It's an ethernet cable plugged into one of the lan ports and the led won't even light up.

My wireless network is working fine. I have an AirPort extreme hooked to a cable modem and all other devices around the house can get into the network.
However, I am trying to hook up a MagicJack to the AirPort via an ethernet cable without success. The AirPort has 3 lan ports for this kind of purpose. The MagicJack works fine when plugged into my Mac's USB port, but it seems to slow the Mac down too much.
I have tried a new cable, checked that I have power and have rummaged through AirPort Utility, but cannot get the AirPort port to even light up. I've also restarted and rebooted both the AirPort and the cable modem multiple times.
Any advice would be appreciated.
Thanks

KiltedTim. You nailed it. I tried the MJ directly into the cable modem and still can't get a phone line. I'll see what MJ can do now.
Thanks and thanks to alanoconner for your help.

Help! - I can't get my airport extreme 802.11n to work

Hi everyone,
So yesterday I purchased and attempted to set up my new 802.11n AirPort Extreme, however I could never seem to get it to establish a connection (even though the ethernet clearly works, as I am typing this message with it now connected directly into my imac). The airport said that it created a network and the light was on a solid green, indicating that it was working properly.
So, in my infinite wisdom I tried to monkey with all of the settings in the AirPort Utility. In the process of doing this, I tried to click the "join a network" instead of "create a new wireless network." Now when I try to find my wireless airport, it can't even locate any AirPort devices
I have tried to "reset" my AirPort Extreme by inserting a pen into the reset button and holding it down, but it does not seem to work. Is there any other way to reset this device back to it's initial factory settings so that I can try to set it up again?
If anyone has any ideas, I could certainly use the help.
Thanks,
Sean

Sean, hold in the reset button on the AirPort Extreme until you see the amber light begin to blink more quickly. Keep holding another 3-4 seconds when you see this and then release the reset button.
That should allow Airport Utility to "see" the device so that you can reconfigure it.
When you say that the ethernet works, I assume this the connection from your modem. If you have a cable modem, you will need to completely reset it so that it will associate with the AirPort Extreme.
Push the reset button on the cable modem
Power it off
Pull the battery if it is easily accessible
Leave it off at least 20-25 minutes or longer before you power it back up
This information above assumes that you have a cable modem. If you have a different type of connection, post back on your progress.

My Time Capsule disk shows on my iMac but not my MacBook Pro. How do I get the Airport Extreme mounted disk to show as an available Time Machine disk on my MacBook?

I just replaced an Airport Express with a new Airport Extreme. My iMac recognizes the external hard disk I have connected to the Airport Extreme, and my Time Machine is backing up to it. But I can't get my MacBook Pro to recognize the disk as available for Time Machine. Both are running Mavericks, and the MacBook is only a couple of months old.

Hey Tim Cargal,
Thanks for using Apple Support Communities.
This article explains how to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows.
AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
http://support.apple.com/kb/ht1331
Have a nice day,
Mario

I can't get my AirPort Extreme to work.

I think my son may have accessed airport utility yesterday but not really sure. I have internet on the router but only flashing amber on airport. mac keeps telling me That it can't find a configured air base or that another device is using my computers IP address. I have just managed to rename it but when I click on it in utility's it says-Ethernet unplugged
-internet connection
-no DNS servers. ( all Amber light next to them)
and and then reverts back to that another device is using my computers IP address. (Device no keeps changing)
IM not overly computer savvy. I need help please.

There are a couple of preliminary things that are important.
IPv6 must be set correctly to link-local only.. . everything is now dependent on this.
And auto doesn't cut it.. in fact auto is the problem with all of this.
This is set in network preferences and you set it for both the wireless and ethernet (whichever you use .. both if possible).
eg wifi
Try again with the setup.. If it still fails you have two choices..
Use iOS version airport utility which seems to work better.. it is free download from app store for iOS v6 and greater.
OR go for a purely manual configuration.
I have to admit this is what I do.. since it is pretty much foolproof.. !!
You need to factory reset..
And it is much better to use ethernet with wireless off if possible.
Then you can run through the method I have laid out on a few threads.. but the screenshots are having issues showing up.
Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs
Here is an earlier one..
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
Note also you can do this in isolation from the network.. and it is sometimes worth doing that way. Anytime the setup in network fails.. factory reset again and do it manually outside of the network.. Then you are MAKING the airport do what you want.. instead of automagical routine getting in the way of sense.
For your setup Bear2win.. you have a router.. so the AE must be set to bridge.. and you must set wireless to create a network.. not extend.. once you setup like this.. update the AE and place it into the network.. there can still be some minor issues to fix up but they should be trivial.
Screenshots of the problems and when it breaks down if you don't get anywhere will help us determine where you problem lies.. expect Mavericks to kick a lot.. it can be a pain as the network ability approaches that of tin cans with wet string.

Can't connect to airport extreme with my Sony Vaio laptop - don't have airport utility disc, how do I get connected?

My main home computer is an imac and all devices are apple. I do have however a sony Vaio laptop for work and I cannot get it to connect at home to the airport extreme wireless network. Can I get an airport extreme utility disc to install manually?
Roooble

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

I cannot get my AirPort Extreme to factory reset

I can't get my AirPort Extreme to factory reset

Pull the power cord from the back of the AirPort Extreme
Wait a few minutes
Hold in the reset button first, and then keep holding it for an additional 10 seconds while you simultaneously plug the power back into the AirPort Extreme
Release the reset button after the hold period
Allow a full minute for the AirPort Extreme to restart to a slow, blinking amber light
If the AirPort Extreme is functioning correctly, it has now been reset.
If you try this procedure a few times and the Extreme still will not reset, then you may have a defective Extreme. Take the device to an Apple Store.....if you have one near you.....so they can take a look. Or, contact Apple Support directly.
http://www.apple.com/support/contact/

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I just changed the channel on my Airport Extreme and now can't get the Airport Express to recognize the network. What do?

I changed the channel on Airport Extreme to get away from interference. Now I can't get my airport express to recognize the network. What do I do?

I would suggest that you perform a "hard" reset on the AirPort Express Base Station (AX), and then, using the AirPort Utility, reconfigure it "join" or "extend" the AirPort Extreme as appropriate for your networking requirements.

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

Can't get my Airport Extreme's HD to show up for TimeMachine...

Similar Messages

Maybe you are looking for