Can't get my appletv to go pass setting date an time , and won't restore

My Apple TV won't restore or get passed the setting date an time
What c an I do or try ???

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Similar Messages

  • I can not get several apps to load on my i-pod touch and I even restored it back to factory.  The message I get is that I need iOS 4.3, but i-tunes tells me I already have the latest version.

    I can not get several apps to load on my i-pod touch and I even restored it back to factory.  The message I get is that I need iOS 4.3, but i-tunes tells me I already have the latest version.

    You can't install any application which requires iOS 4.3 or newer on a first or second generation iPod touch. If you still have a copy of that application compatible with iOS 3.1.3 or 4.2.1, import it into the iTunes library and sync it.
    (72397)

  • I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

    I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
    Thanks

    Uncheck all the songs in the playlist. iTunes will then play one song and stop.
    Regards.

  • Itunes says I have incomplete series passes.  I have downloaded everything, so how can I get it to complete the pass?

    itunes says I have incomplete series passes.  I have downloaded everything, so how can I get it to complete the pass?

    Try this:
    http://support.apple.com/kb/HT2519

  • TS4424 I still can't get my mail to work.I have reinstalled Security update and combo 3 times. About ready to call Apple but mI don't think I should pay for it!!!!

    I can't my Apple mail to work.  It started when I did an up date.  When I went to use mail  (the little stamp at bottom)  it said, "you can't use this version of mail with this version of OS X.  I looked on support and was told to solve the problem  by downloading combo package and security update. Did it 3 times.  I did everything.  Still doesn't work.  I even took everything mail out of applications and the library and did those two updates and still can't get it.  Could I reinstall OS X Snow Leopard and would that affect any of my documents like i photo or i tunes?  I don't want to loose anything!  I have spent way too long on this problem.  I feel like I own  PC with windows again.  Please help!!!!!!    Frustated

    No need to reinstall Snow. Try trashing all the Mail.apps you have. (But don't empty the trash yet!) Do a search for those. Reinstall Mail from the DVD in Optional Installs. This will put Mail 4.2 in Applications, then run the Combo Update, which will update Mail to 4.5, and then the Security Update again, in that order.

  • I have a brand new IPhone 4G.  For the life of me, I can't get the phone to ring. I have been in and out of my settings, have disengaged both silent and vibrate.  But when dialing my number from another phone, the call goes direclty into my voice mail

    I have a brand new IPhone 4G.  I can't get it to ring.  I have gone into settings and disengaged vibrate, and have engaged the ring button on side of phone.  But everytime I dial my number from a different phone, it doesn't ring. Rather the call goes directly into my voice mailbox (ogm heard immediately); not even one ring! Please advise

    Well, if it goes to VM immediately the call isn't reaching your phone, so no wonder it isn't ringing. Do you see a network displayed in the upper left of the screen? Have you activated the phone by connecting to a computer with the latest version of iTunes? Have you called your carrier to make sure they have provisioned it correctly?

  • HT204053 Can't get into old account, I think I have 2 accounts and the APP Store is under an old one and somisnItunes and I can't get in to change the password

    Can't get into old account, I think I have 2 accounts and the APP Store is under an old one and somisnItunes and I can't get in to change the password

    How to find your Apple ID:
    http://support.apple.com/kb/HE34

  • HT201365 I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Help Please

    I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?

    If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
    read this article to give you direction how to put your device into recovery mode.
    Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
    good luck!
    http://support.apple.com/kb/ht1808

  • Save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

    save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

    It is the same in the latest version 7.0.2. You can shut off the saving and auto filling of passwords by clicking in the menu bar at the top Safari > Preferences and then select Autofill and uncheck the passwords box. Also check the next pane as well.

  • HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

    If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

    She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
    Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • How do I get my appletv to update its itunes data?

    I am streaming most of my itunes library and not syncing it.  However, as I add things especially m4v files to itunes they don't show up on my AppleTV 1stgen right away.  I almost always have to restart it.  And even then the files won't always play on the first restart.  Is there another way to get the AppleTV to update the stream without restarting?  And why do some files only work after one or more restarts?

    I don't have it checked.  Should I?
    No.
    I am not syncing I am streaming.
    The iTunes library database is still synced (or copied) to the Apple TV, even if the content itself isn't. Which incidentally is why you don't see the changes you make in iTunes immediately - it's still using a previously copied database.
    Also, I just went into iTunes and hit sync (just for the fun of it) and I got some error message about a port/firewall problem.  Checked security under prefrences like it told me to (when I clicked for "more info") and I don't have a firewall enabled and I'm pretty sure I don't have any third party firewall stuff. Now I am thoroully confused!
    I bet you if you restart as you usually do, it will fix that too, but that's only a workaround and not really acceptable.
    I'm inclined to think you may have network problems, but you might try unpairing the library with the Apple TV and pairing it again.

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • AND OR precedence in JOIN ON condition

    Hi Guys, I have a small operator precedence problem. the last part of my LEFT OUTER JOIN clause looks like this: ON bsch.key# = aknl.key# AND aknl.month =  bsch.month The above works fine, but there are some cases that need an addition ON bsch.key# =

  • I accidentally uninstalled itunes, how do i get it back

    Have I lost all my music?

  • Can doc properties be in sync with a page size change?

    I am using the manual.indt template with InDesign CS4, I made a page size change to the template and now the text boxes and everythng else are knocked out of alignment. I need the margins to be 'correct' in relation to the page size, just as they wer

  • Document is still being processed in the background

    Hi guys. I receive this error when wanting to Change a purchase order in SRM. The PO is already in R/3, and the user has tried to make the GR in SRM. This GR then failed in R/3 because of incorrect accounting data, so I changed this in SRM. Then the

  • Appleworks 6 will not launch in os9.2

    hav been using appleworks 6 for long time w/o any problems. i noted yesterday that some of my fonts in different programs had changed. last night when i went to use appleworks 6 it would launch then immediatly quit with a message saying appleworks 6