Can't get my ATV to see my desktop PC

Can anyone give me some advice on how to set it up so I can stream my music from my desktop PC to my TV through apple tv. When I look at the computers menu on ATV, there is nothing that shows up. Home sharing is enabled on both my ATV and my desktop. My Desktop PC connects to my router via ethernet cable.

I don't see an airplay option on my Itunes. On my appletv the only thing I can find regarding airplay is under settings. Then it just asks me to turn on/off and password.
I disabled my virus symantec software. I believe homesharing is set up property. It is turned on in my Itunes on my desktop with the same account information as I entered on my appletv under settings/computers
Any other idea's for troubleshooting?

Similar Messages

Bought a NuPower replacement battery, but can't get my MacBook to see it.

Hi Everyone!
Bought a NuPower replacement battery and installed it. Rebooted and the fans are running at full tilt. Did a SMC reset and a PRAM zap. Shut down. Restarted and the battery icon still has an X in it (no batteries available). Fans are running fast as well (again).
Repeated this a few times, but still can't get the MacBook to see it.
Here's the deets of my MacBook:
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB51.007D.B03
SMC Version (system):          1.40f2

Having problems as well.
It has been less then 48 hours that I have installed the new battery and it's still not charging. It says that I has 51% of charge, but it has not pass that number in the past 48 hours. I have reset the PRAM and SMC and no change.
When I go the System Information, I see that it recognize it, but it does not what to charge:
Model Information:
Serial Number: W024902CY6GOA
Manufacturer: Newer Tech
Device Name: ASMB013
Pack Lot Code: 3230
PCB Lot Code: 30db
Firmware Version: ddae
Hardware Revision: dac2
Cell Revision: 2b39
Charge Information:
Charge Remaining (mAh): 2814
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5505
Health Information:
Cycle Count: 1
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11769
AC Charger Information:
Connected: Yes
Charging: No

How can I get iMovie 10 to see my iPhoto Library after I relocated it.

How can I get iMovie 10 to see my iPhoto Library after I relocated it. I moved my iPhoto Library to a secondary hard drive, because my main SSD wasn't large enough. I then upgraded to IMove 10.0.4 and also moved my iMovie Library to the secondary hard drive. When I highlight the iPhoto Library in iMovie there is nothing there. Any ideas on how to get iMove to find my relocated iPhoto Library?

I think I may have solved my own problem. I left cliked on the relocated iPhoto Library and went to "Open with >." I then went to "Other...." I then set the wind located in the bottom labled "Enable:" to "All Applications" and picked iMovie. It gave me a error, but the ultimate result was that iMove now was linked to my iPhoto Library.

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesturday but not now, any help

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?

Hi,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

I lost my photoshop elements 7.0 serial number and i had not had it registered so i can't get it back. My old desktop broke and i would like to install photo shop on my new laptop. How can i get it back?

I lost my photoshop elements 7.0 serial number and i had not had it registered so i can't get it back. My old desktop broke and i would like to install photo shop on my new laptop. How can i get it back?

I would first go to your Adobe Account and make sure that all info in it was correct and then match up all S/N's with your records. If you find any problems, then make corrections.
If all matches, but does not work, contact Adobe and see if they still sell replacement DVD's for CS2. Adobe usually does, for a small price. Still, you will need your correct S/N, so you will probably be back on the phone to Adobe. When I once used them for a S/N problem, they were quick and did a perfect job.
Good luck,
Hunt

I can't get my macbook to recognize my desktop pc with windows 7

i can't get my macbook to recognize my desktop pc with windows 7.

Mac 101: File sharing may have some hints.
Stefan

How can I get Siri to not see some iCal calendars?

When I ask to see my calendar, Siri shows calendars that I want to supress. I have some iCal calendars with misc info (warranties, medicines, etc.) that I turn off in iCal, off on the phone calendar. But Siri shows me (for ex: "19 meetings"" when I ask to see my calendar. How can I get Siri to avoid those calendars I have turned off elsewhere? Thanks!

If it is your own conference bridge you can create a new contact named "My Bridge" and enter your 1800 number along with a "wait" command and pass code and #. It would look something like this 1-800-555-5555;12345678#. This way when you tell Siri to call "My Bridge" she'll dial and then you'll notice an option in the lower left to dial the pass code. Press that and you're all set. You can do the same for frequent conference bridges you connect to. Hope this helps.

Can't get my UC320W to see a phoneline

Hello,
I have a UC320w which I am trying to set up for an office. I am currently unable to get the device to see any phonelines, despite being plugged into the master socket of each one. The FXO line simply says "no-service" - I have tried all four ports) and will do no more than that.
I have tried different cables, confirmed the phone line to be good by using an analogue telephone on it and resetting the device back to factory defaults (and rebooting), all to no avail.
Has anyone got any suggestions?
Thanks,
Jamie

Hi Jamie,
This sounds like you need to load the PMF for FXO overload. This PMF fixes issues with FXO lines not being detected.If you go to
https://supportforums.cisco.com/docs/DOC-16301
You can download the FXO_Overload_disable.pmf and then go to Status>Devices>Alter PMFs in Configure Utility and apply configuration. This should fix the issue.
Regards,
Chris

Can't get Jump Cut to see Beat Markers

I've watched several tutorials. I've tried this in a new project and I can ge it to work. I just can't get it to work in my existing project. I've put the music in the background where it's behind the video clips. I go into Clip Trimmer or what ever it's called and add my beat markers, but when I select the portion of the clip surrounding the beat markers it doesn't split up the clips like it does when I try it in a new project.
I've unchecked the snap menu items under view or edit. Like the snap to ends, snap to beats or whatever.
What am I missing here?
Can I create what I want in one project and copy and paste that combo back into my other project?

Might I suggest a training DVD
http://www.classondemand.net/media/final-cut-training/fcp7.aspx
This is an AVCHD camera. You need to use the log and transfer function with the correct settings. You should not use iMovie for capture as it captures in an older codec that's not very good. In FCP7 you can capture in ProRes or ProRes LT, both of which are superior.
I stand to profit from this message.

Can't get Flashplayer to install across all desktops

When we download the Flashplayer, it only installs and is
viewable under the desktop on our computer that it was downloaded
to. If we switch desktops on our computer and try to view something
that needs Flashplayer, we get the message 'you must download
Flashplayer'. If we then download under a 2nd desktop on our
computer, it says the installation was successful and yet we can't
view the content and we don't see the movie you're supposed to see.
We have tried uninstalling and then reinstalling under different
desktops but it will only work under the first one that it was
downloaded to. How do we get this to work across every desktop on
our computer????

I am having similar problem. I am Adminuser while
rest of my family are simply users. I've installed Adobe Flash and
am able to view video content on You Tube; However, neither of my
sons can. I get same message: Java script is turned off (It is ON)
or download FLash. Wassup! How can I correct so all users admin or
not can run Adobe Flass Player?

My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon (Button Safari) back on my desktop and connecting again to the Internet ?...
Thanks for the help

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

I have "reminders on my iPad and iPhone and they sync thru iCloud can I get the same app for my desktop so all (3) devices will sync off of iCloud

I have "reminders" on my iPad & iPhone that sync thru iCloud. Can I get an "reminder" app for my iMac that will allow me to sync all (3) devices thru iCloud ?

Captfred,
The process you noted above worked to show the reminders on the IMAC,
However maybe you can help me with this problem.
The reminders I set in the Iphone4s/Ipad2 don't clear off the list on the IMAC even with deselecting show all completed reminders.
Thus on the Iphone4s/ipad2 the list is short and direct, but on the IMAC it is over 100 items any sugestions as to why the reminder is hown with the check mark but does not clear from the screen.
Thanks for any help on this from anyone

Please Help! Can't get Airplay ATV to work.

Righto.
I bought ATV last week and have been working on this for a total of about 30 hours. Still nothing. I just cant get my late 2011 Macbook Pro to Mirror. Bought Mountain Lion update - no AirPlay icon at the top of the screen. In System Preferences > Displays it says No Devices Detected. I restarted everything, checked ATV software, turned ATV on/off 100 times, nothing. So I bought AirParrot and it can't find ATV either. Yes we are using the same network. I feel like throwing every piece of junk Apple device I have in the bin.
Any ideas?

read this?
http://support.apple.com/kb/ht5404

After HD crash, restoring to new HD. Library files missing or corrupt. How can I get iTunes 10 to see my music

The hard drive on my fairly new HP Pavilion desktop died hard on boot-up. HP replaced the drive the next day. Used the Recovery Disks and got the unit up and running. I have been using Memeo Premium Backup and never did get any error messages during backup. When I went to restore the data, much of it is missing or corrupt. In the Restore data on the backup drive, I can see many folders but only a few have data. I opened a ticket with Memeo and after they made a few useless comments, they closed the ticket.
Fortunately, most of my iTunes data (folders and files) were restored in-tact. The exceptions were the library files, which are missing. The library files in the Previous Itunes Library folder were corrupted. I installed iTunes 10, but there are no songs, podcasts,etc, in it. I have tried every article in the knowledgebase and tried to fix the ITL and XML files, but it is hopeless. Also, when iTunes is running, at the top it shows .iTunes Preferences.plist. So, I have a disaster and about 10 gb of music going nowhere. Any ideas? I would really appreciate any help I can get.
Brad

They are all mostly the same size at around 6MB but there are a couple that are very large 55MB (including the 30 tmp file I mentioned above. There is also one around 7KB). I tried renaming the most recent (as of 8:30PM last night) tmp file as iTunes Library.itl but when I launch iTunes, I get the "The file 'iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" popup.
But when I go into a directory I created to get the most recent itl file I've been saving as a backup and copy it into the iTunes directory to replace the one that I tried to make with the tmp file, and launch iTunes, my whole library loads with no problem.
However, if history repeats itself, this will work for at most a couple of days before I have to copy the saved itl file back into the iTunes directory.

I can't get my ATV to work with my Devolo wireless

I've had two Apple TV's and both don't work on my Devolo wireless. They work fine with the mother router - my BT HomeHub.
ATV and my ipad, iphone and Macbook can all find the network but I don't get hte option to mirror, etc. It just doesn't show up on the device?
Very strange? And I can't find any info on it anywhere?

Hi, thanks for coming back to me. Both devices are connected to the same wireless network - the one that comes from the Devolo device - however when they are connected to this network they don't work. However when I connect them to the mother router network - they work, e.g. ATV features appear.
I've now checked and there is no firewall on the Devolo router - no idea what I can do?!

Can't get my ATV to see my desktop PC

Similar Messages

Maybe you are looking for