Can't get my design to work, could someone lend some guidance?
Hi,
I'm a complete newb to Labview v8.6.1. I come from the .Net world and I'm having difficulty making the transition, some guidance would be greatly appreciated.
I've attached my .vi that I came up with but I've hit a wall and I can't get this design to work correctly:
I have two buttons on my .vi, a Sample button and a Calibrate button. When I hit the sample button, I need to write out the values from my linear sensors to a file, this actually works fine. When I hit the calibrate button, I need to get the values from the sensors, store them in an array for later use. This works fine as well.
The problem I'm having is I need to use the stored values in the array in my Sample button logic which doesn't work because I don't have cases for my "False" condition.
Am I even close to the right solution here?
Thanks for any guidance.
Solved!
Go to Solution.
Attachments:
FirstDesign.zip 68 KB
Do you have access to the Event Structure? It will work a lot better for GUI like this instead of polling the buttons (and using a lot of CPU).
You should look into shift registers to store your calibration array. I think the resources nyc gave should mention these somewhere in there.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Can't get popup window to work, could use code help.
This is the first time I've tried to open a popup window in
flash, and I can't get it to work. The site I'm building has the
navigation buttons contained in an animated movie clip. All of the
navigation buttons work fine. But there's a link that the company
wants me to add that opens a window to another site who hosts a
video commercial for the company (it has to be a link to the other
site, it can't be added directly to the customers site).
The link the other company sent me is for javascript (I'll
include it in the attached code), and the code works great if I
just insert the javascript in the html. But I wanted to try and get
the link in the Flash menu. I've tried several versions of the
code, from applying it directly to the button to naming an instance
of it and attaching the actionscript in the movie clip. When I'm
done, I get two different problems. On my XP machine, I get a
warning error about the flash trying to open something to another
server. On my Vista machine, nothing happens at all.
Anyway, I'm including the original javascript and several
versions of the actionscript I've tried (with the actual site
information replaced with "fakeurl.com", wasn't sure how these
forums felt about including site info). Any help at all would be
greatly appreciated. I've searched and searched for about a week,
and I'm tempted to just do away with the Flash button and use a
cheesy javascript button for this one link.
Thanks!
MoAttIn article <[email protected]>,
[email protected] wrote:
> All I want to do is have a Close Window link in my popup window that works.
Select your text that you want to act as a trigger to close the window,
just as if you were going to create a link.
Then paste the following line of code into the link Inspector:
javascript:self.close();
That should do the trick.
Cheers Martin -
Can't get direct rendering to work
On my notebook with an Intel 945GM card, I can't get direct rendering to work.
I'm using the 'xf86-video-intel' driver.
/etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
# InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap"
Option "DontZoom"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "GLcore"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
DisplaySize 338 211
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
And here is /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
Build Date: 03 February 2008 02:54:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap"
(**) Option "DontZoom"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Mouse0"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
(II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
(II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0200000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (338, 211) mm
(**) intel(0): DPI set to (96, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "VertScrollDelta" "100"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(--) Touchpad touchpad found
(**) Touchpad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Could not init font path element /usr/share/fonts/Type1, removing from list!
AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Can anyone help me with this?
Last edited by bughunter2 (2008-03-03 01:06:30)The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already) -
Can't get video chat to work outside of LAN...
Hello,
I can't get video chat to work.
All computers, LAN and WAN are running the latest iChat under 10.4 (including latest updates).
Within our LAN, via Bonjour, everything is fine.
I'm now trying to set up an offsite Intel iMac (10.4) and I can't connect via video chat with them.
I've had this problem in the past and eventually gave up (so much for "it just works" - I've spent the last 10+ years dealing with Macs and Mac-based networking, I can't imagine "my dad" figuring this all out). Trying again with fingers crossed...?
If someone could help, it'd be much appreciated.
Thanks,
Kristin.
The studio router/firewall is a SonicWall TZ 170 Standard.
This router has a static IP.
All suggested ports on the SonicWall are set up correctly to allow in/out from our LAN.
All computers on the LAN have static IP addresses.
Quicktime streaming settings set as suggested.
OS X Firewall on all computers = OFF.
No iChat add-ons on any computers.
Internet connection speed = 7404 kb/s
The offside router/firewall is a LinkSys WRT54G
This router does not have a static IP.
DMZ is ON and set to the only computer connected to it.
Computer has a static IP address.
Quicktime streaming settings set as suggested.
OS X Firewall on all computers = OFF.
No iChat add-ons on computer.
Internet connection speed = 5116 kb/s
If any more information is required to help you help me, just let me know!Does the TZ170 have UPnP or Port Triggering then ?
I can not see that it does here
Opening the ports in the manner listed on that link will only allow one computer (IP) to use the open ports.
The Linksys is router and you have not mentioned what the modem is doing at that end.
Why not use UPnP here ? The Linksys does it (on the Administration page)
Most likely this needs the Respond to Anonymous Pings checked on the Security page.
9:29 PM Thursday; January 17, 2008 -
I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???
do u have your ipad doing airplay because that could happen
-
Installed Windows 7 on my IMac, now I can't get Apple OS to work
Installed Windows 7 on my IMac, now I can't get Apple OS to work, I have tried booting with Snow Leopard disc in and nothing works. I had trouble from the start but now nothing works except Windows 7, sound wont work etc. etc.
I originally tried installing Widows 7 so I could run my Flight Simulator X on the IMac I got from my daughter and I used BootCamp and had partitioned it at about 4GB for windows and the first thing I got was I had to put a bootable disc in and neither the windows 7 or Snow Leopard would work. Then I got Windows 7 to work but I can't get Snow Leopard to run, when I put the disc in it says that it not supported. Of course windows wont show me anyother areas of the disc that I could try to get to, the other side of the partition I guess. I have tried holding the C key down on reboot and that doesn't work. I hope this gives you a little more insight as to what is going on. Thanks Bill
-
How can I get my speaker to work again?
How can I get my speaker to work again? I've tried turning my phone off and on, hard reset, removing SIM, cleaning out dust, using the hair dryer, network reset, cleaning headphone port, made sure the phone was not on vibrate,and made sure "Change with buttons" was on. There was no liquid/moisture damage. I was watching a video on youtube and all of a sudden my speaker went out. If I tap on the speaker it goes in and out but does not stay on/loud.
Do you get sound in any apps e.g. in Music and Videos but not notifications or sound in other apps ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If you don't get sound in any apps then have you could try a soft-reset to see if you get sound after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
Can't get "Edit Colors" to work in Illustrator CC
Hi. My boss just added Illustrator CC to my mac.
I'm not sure why, but I can't get "Edit Colors" to work in Illustrator CC.
When I select an object and try to reassign colors in the "Edit Colors" menu, the submenus are greyed out.
It works fine on Illustrator CS5, so I'm not sure what the problem is in CC.
Is this a bug or just a limitation of the CC trial period?
Can anyone please help with this?OK, so Trial Period isn't the problem? Thanks for that info.
I'm working with customer supplied files and often have to reassign colors to artwork for different projects.
I can assign colors with the color panel, but complex designs containing multiple pieces and layers can take for-ev-er to reassign colors that way.
Like I said, "edit colors" works fine in CS5, so I'm trying to figure out why it's not working in CC.
Appreciate any help the forum members can provide. -
Can't get my hyperlinks to work...
Hi Everyone, I am hoping someone can help me....
I am not very computer savy so if you could answer in the simplest way you know how would be awesome!!
I can not seem to get my hyperlinks to work on my website, they work when I am editing the website but not once I go to the published version...
I have been into the inspector and set up the hyperlink for each one but still no luck. If its any help my website is www.bearsbybecca.com
I rang the apple help line first but he told me he couldn't help??
I am hoping someone can help me!
thank
becI have solved my first question
This:
txt.setNewTextFormat(css._css.input);
- has to be:
txt.setNewTextFormat(css._styles.input);
In the secound question I still can't get my hyperlinks to
work properly... Please help :) -
How can I get Activity Monitor to work?
I've searched the discussions to no avail, so I have this question: how can I get Activity Monitor to work? It launches and its window opens but then the spinning beachball appears. I've checked the Console and it shows that the Activity Monitor is attempting to fully launch but then it "exits" and then it tries to fully start up again, goes into an infinite loop or something. Issued a "force quit" succesfully. I've deleted the Activity Monitor's .plist, no joy. What to do? Thanks!
I'm running 10.6.8 on a MacBook Pro (late 2011)I wish I could be more positive but I have no experience of MacBook Pros and whether their demands on the system differ from my simple iMac. If you have the time to scour through 'More like this' ( to the right of your initial post) and the links within it, you may find leads.
I also found this thread via Google which in parts seems to echo your troubles. I hope it helps; thank you for the star.
Activity Monitor Not Responding - MacRumors Forums
71
Message was edited by: seventy one -
How can i get fallout 2 to work
How can I get Fallout 2 to work on my mac book pro. I just got my computer and the graphics are all messed up. I tryed installing it on a friends computer and it worked. He has a mac book pro that is only about 8 months old. Why wont it work on mine?
Ask your fellow MBP owners -
MacBook Pro
http://www.apple.com/support/macbookpro
I hope none of you are getting it off torrents, always trouble in that dept.
Maybe it needs a patch for yours and ATI 6xxxx mobility.
It helps to know the specs, and model number (17"? etc)
http://support.apple.com/specs/#macbookpro
Graphics and video support
AMD Radeon HD 6490M graphics processor with 256MB of GDDR5 memory on 2.0GHz configuration; or AMD Radeon HD 6750M graphics processor with 1GB of GDDR5 memory on 2.2GHz configuration
Intel HD Graphics 3000 with 384MB of DDR3 SDRAM shared with main memory5
Automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
so it could be getting messed up with using the Intel graphics - for all I don't know - or you have 6490M with just 256MB -
Is there an adapter can i get so square will work with the otterbox i have on my iphone
Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help
That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
Give that a try. Claims to work perfectly for Square. NOT headphones. -
i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please
Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
But hey thanks for your help, -
My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address. I can't get rid of my "work" email address on my iPhone 4S
Hi Sister Kate,
If you change the Apple ID you are using on an iPhone or other iOS device, there are several places you need to change it on the device. See this article -
Apple ID: What to do after you change your Apple ID
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
Problem with display of many elements in IE11
Hi, After automatic Windows Updates today I am having problems to see correctly many elements in any webpage, this is more notorious in buttons, where I can always see some weird cross. I attach some screenshots http://imgur.com/nz6aTBG http://imgur.
-
Can i print out the manual for ipod mini in different language?
hi i wanna get an ipod mini for my mom and she doesnt really speak or read enlgish all that well, i mean ill gladly help her out, but i want her to have some sort of manual in case im not around, she speaks russian and i was wondering if i can get a
-
Error time out to connect FTP server
Hi Experts, I am getting the error in receiver communication channel (FTP) as : An error occurred while connecting to the FTP server ''. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: The control connection
-
Recuring posting problem with dates
Dear experts I would like to ask you how to deal with strange problem within recuring posting document For recusring document I have set up for Run date 15, but when document was posted due to date was 5th not 15th. 5th is the same as posting date. c
-
Hi, I'm working on a pc. I'm using a dynamic font which I've embedded into my .swf file and the file looks exactly the same on my sister's, and my computer at work - both pc's - as it does on my pc. But on my cousins computer - a mac- the font looks