Can't get my desktop to connect??

I have a WRT54GS Router. Just picked it up. I followed all the easy instructions to connect my desktop to it. Used the supplied network cable. Problem is no matter what it keeps saying no network found. The light is on for the port I'm plugged into but it won't find it. My laptop works just fine, using it right now. Any ideas?? I used to have the desktop on a wireless system in my old home and it worked then.
Please help me out!!!
Thanks, Chris

Is your laptop connected using wifi or cabled? if using cabled, try unplugging that cable and plug in to the desktop. I doubt its the cable but no harm trying. Other than that, try resetting your router.
Also make sure you have enable your LAN and disabled your WIFI card on your desktop.Message Edited by rois on 08-05-2006 06:40 PM

Similar Messages

Can't get bb curve to connect to computer, w/ new USB, downloaded desktop manager................anything I'm missing? Help! Thanks, Holly

Solved!
Go to Solution.

If you can't answer the questions, then you leave us to pretty much guess at what could be wrong. Are you sure you don't know what PC OS you are running?
Given what you are willing to do, there's not much that can be done here. You see, this is free to you, and voluntary by me (and the others who participate here). I get nothing helping you out here. This is not any part of your formal support. As such, there's nothing we can do beyond use the information you provide in order to guide us to what might be going on. But, so far, we have nothing from you at all.
But, let me continue to try again...can you tell me the steps you attempt? And the results of each step? After all, you say you "can't get bb curve to connect to computer"...so, you must have tried something. What did you try? What happened with each step along the way of what you tried?
If you can't participate in providing information, free support such as this will be pretty useless to you...fee-based support would be your next step, I'd think. If someone get's paid to help you, they might have tools available that the volunteers here don't have.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I get the ipad to connect to itunes 10.6.3?

How can I get the ipad to connect to itunes 10.6.3?

The iPad mini requires iTunes 10.7 or newer to sync.
(82182)

I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
Agnes

Hey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Hi I can not get my printer to connect to the internet.

Hi
I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
When I try to download apps directly from the printer it says that it is not connected to the internet.
I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
Please help me

Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks

How can I get my iPad to connect the love film app to my Apple TV?

How can I get my iPad to connect the love film app to my Apple TV?

Have you confirmed that the app supports AirPlay? If it doesn't, then you'll have to connect via screen mirroring. See:
http://support.apple.com/kb/HT4437
and
http://support.apple.com/kb/HT5209
Regards.

Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

You must be signed into the mobile iTunes Store using the same Apple ID you used to originally purchase iTunes Match. On the iOS device go to Settings > iTunes and App Stores and tap the Apple ID. Log out, then log in with the correct ID.

How can I get my desktop display to go to 1440*900?thanks[solved]

I am using KDE 4,My problem is I can't set my graphics display to 1440*900
In my searching
I've found this on the Ubuntu forum, which seems to be my issue. It doesn't matter what I set up in xorg.conf file, it ignores it.
It references a file called "kcmrandrrc", which doesn't seem to exist on my system. I am not sure where KDE is getting the 320x200, 320x240, 400x300,...,640x480, 800x600 and 1024x768 graphics modes. It's not from xorg.conf.
I found this file...
"krandrrc"
Which contains the following...
[Screen_0]
OutputsUnified=false
UnifiedRect=0,0,0,0
UnifiedRotation=1
[Screen_0_Output_CRT1]
Active=true
Rect=0,0,1154,768
RefreshRate=0
Rotation=1
How can I get my desktop display to go to 1440*900
thanks
Last edited by icywalk (2010-01-27 10:18:30)

What I was looking for was something along these lines:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "NvAGP" "3"
Option "Overlay" "False"
Option "ConnectToAcpid" "False"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Then you put in the 1400x900 that you wanted in the Modes line.
If you are to use Xorg -configure successfully, you will need to do it from a console screen. If you are using like kdm or gdm, I would suggest that you log out, then go to a console screen (<ctrl><alt><f1>) and then log in to an account. You will need to su, and then issue the following command to shut down x: telinit 3 that command should shut down X and your login manager.
After that you can run Xorg -configure and do whatever else you need with it.
Then, to get back to what you had before, the command telinit 5 should restore you back to your gdm or kdm or whatever. (Normally <Ctrl><Alt><F7> will get you back to your login manager, if it doesn't try F6 or F8 until you find it.)
HTH

Can I get a cable to connect my iPod to my iPad instead of to my laptop?

Can I get a cable to connect my iPod to my iPad instead of to my laptop?

No. Your iPod Shuffle can only be connected to and synced with iTunes on your PC or Mac.
B-rock

Can not get my MacPro to connect to iCloud

I can not get my MacPro to connect to iCloud. It tries periodically but returns the message "This Mac can't connect to iCloud because of a problem with [my account]@aim.com." This aim.com address is one I have not used in years. I have tried to purge all references to this address in my system but must have missed some. How do I correct this?

This aim.com address is one I have not used in years.
Is it still functional ? iCloud sends a welcome mail to this adress. Look for it.

I can't get my iTV to connect to my computer

I can't get my iTV to connect to my computer

Hello, aeroadam.
The steps in the article below will help you troubleshooting the issue your are experiencing with Home Sharing and your Apple TV.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Cheers,
Jason H.

I can't get my Ipod to connected to my itunes, i can't get my Ipod to connected to my itunes

i can't get my Ipod to connected to my itunes, i can't get my Ipod to connected to my itunes

Search for "device not detected in iTunes" and follow the troubleshooting steps provided.

How do you connect to wi fi. i can t get the ipad to connect to my home network.

how do you connect to wi fi. i can t get the ipad to connect to my home network.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
 Cheers, Tom

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

I can not get my Ipod to connect with my computer using a usb cord

I can not get my Ipod to connect with my computer using my usb cord ?

Hi starhalcomb,
I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

Can't get my desktop to connect??

Similar Messages

Maybe you are looking for