Can't get my I pod to work.

after an update I have an following picture on my screen: usb narrow towards I tunes. I can't do anything. If I connec it ty my I tunes it doesn't show me my I pod. I tryed everything. This thing still doesn't work. what should I do

First see if resetting the iPod will make it visible in iTuns so yu can restore the iPod
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if manually placing the iPod in recovery mode will make it visiable. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- See if DFU mode will make it visible.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh

I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh
Apple - please please let us know what is going on

ewaller wrote:
fazio96,
Could I prevail upon you to come up with a better thread title? I resisted my first inclination to move the thread to "Dustbin"; but I will say the title does little to inspire us to help. You may wan to read the article linked in my signature.
Thanks.
I'll change it now. I just realized it sounds rough, but I was mad because I couldn't get it work, it isn't anyone's fault, sorry
EDIT: I got it to work at an usable state! By using the 8192cu driver on the AUR and the suggestions in the comments about disabling power-save, I got it to be usable. It now has up to 8% packet loss, not 30-40% like before, and the ping spikes are now 300-400 ms and less frequent, not 1000-1200ms. It's not working really well but now I can at least surf the web. Thank you all for the patience.
EDIT 2: after testing more I realized it still disconnects every few seconds when I'm far from the AP. However, when connected, I still have very strong signal. If I use it on windows or another distro it doesn't disconnect. I tried compiling the driver from realtek by myself using the istructions in the second post but I don't know how to fix some compile errors, so I decided I'll stick with my usb dongle. Maybe someone will find a better solution.
Last edited by fazo96 (2013-09-30 16:08:10)

Where can i get my i pod fixed

Hey were can I get my I Pod fixed

You send it to Apple to be swapped for a refurbished one for a flat fee. See here for pricing:
http://www.apple.com/support/ipod/service/prices/
Or do a simple Google search for "iPod repair" and you should get a plethora of results to work with. There are tons and tons of third party repair facilities out there who get the job done.
B-rock

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get iCloud to accept my working Apple ID and password

My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

I just got a new itouch and i can't get imessage or facetime to work on my home network

I just got a new itouch 4 and i can't get imessage and facetime to work on my home wifi network (Airport Express). I can't explain it. The itouch works fine otherwise uncluding the internet. Facetime and imessage work at the apple store so there must be something wrong with my home network. Please help if you can!
iPod touch, iOS 5.0.1

I changed the DNS to 8.8.8.8 as you suggested with no success, I even tried 8.8.8.8, 8.8.4.4 as suggested by others with no success either. When I try and activate iMessage or Facetime, I still get the same message "could not sign in, please check your network connection". The internet and Mail work perfectly fine on the iPod touch so the WiFi signal IS going through. I am at a loss, any other suggestions would be more than welcome. Thanks!

How can I get my excel spreadsheet to work in numbers

How can I get this budget sheet to work in numbers when it's from excel.

I couldn't get the picture of the whole thing it wouldn't load but you see where it say like 700.00 then below that it say 175.00 well that part works telling me what I need to know but when it get to where it says the 850 it stops working? it won't sum it out or something I'm not great with excel and this was sent to me by a first and it's our budget plan and I really need to be able to use it

How can I get my iPhone 5s to work in my 2015 outback

How can I get my iPhone 5s to work in my 2015 outback?

I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS?

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

How can I get an external microphone to work on an iphone?

How can I get an external microphone to work on an iphone?

Japib is correct.
WHAT happens? Exactly.
Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

Hi, Im trying to install the CC installer on my new MacPro. When the installer loads it says there's a "Download Error" and can't get beyond that. Everything work fine on my old Mac. Any Ideas?

Im trying to install the CC installer on my new MacPro. When the installer loads it says there's a "Download Error" and can't get beyond that. Everything work fine on my old Mac. Any Ideas?

Chasel please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download errors.

I can't get my blade tool to work in Final Cut Pro X 10.0.7

I can't get my blade tool to work in Final Cut Pro X 10.0.7. I magnify the clip to the highest zoom and when I select the blade tool, I see the icon but when I click on the clip to chop it.....nothing. The blade turns red and nothing happens. Please help.

If you are in fact in the active project window, try command B at the location of the skimmer and see whether it makes the edit.
Russ

HT204053 i have put in my apple id and password but still can not get imessage and facetime to work

I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks

Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in

Can't get my I pod to work.

Similar Messages

Maybe you are looking for