Can't get my K8n Neo Platinium to boot, fast help plz!

Hi!
I just put all my new parts in my chassi and tryed to boot it but all i get the second i press the power button is a continued beep, not from the pc-speaker. And the cpu-fan wont start spinning!
It may be a dumb question but is'nt the cpu fan supposed to go in the C-fan connector on the board? Or have i got that all wrong?
I guess that's the problem, the cpu-fan not spinning.
/Makk

yes Basic Troubleshooting Guide -- Volume 1 = Assign Resources to all ISA.
I think it might be worth reseting Cmos
When you clear cmos (userdata) you must enter the changes you done in bios over again.(Step 9)
the bios version is the same , it's in protected nvram .
Cmos of the bios chip is user data which you alter in bios + DMI a database of attached components, this can get corrupted.
When you reset cmos , default data stored in nvram is unpacked and
put all over again in the cmos area with MSIs default settings.
Syar2003 29/12/04 23:27
How to clear the CMOS
1) disconnect the power cable.
2) push the power button to drain the capacitors
3) Move the CMOS jumper JBAT to the clear position, from it's original 1-2 position to 2-3 (it's between the Battery & Bios Chip see Manual.
4) Wait a minute to be sure the CMOS has been cleared. Take your Time
5) Return the CMOS jumper to it's original position 1-2
6) Plug in power cable.
7)restart computer
8) enter bios and select load optimized Bios defaults - save & exit
9) let pc reboot, if you have any settings you want changing do them now.
like Enable Sata etc.,
see how far through you get now Again just with 1 module.
luck

Similar Messages

K8N Neo Platinium Edition boot problems

Hello fellows.
My computer has got it self a wierd problem booting, it wont boot, only gives me a start up tone that identfies an error. It all started a 5 days ago, when i got home from school the computer wouldnt boot, but the day before it worked fine.
I've recorded the sound and the diagnose the leds give me, http://peecee.dk/view.php?id=19656
I've tried all the things i could possible find out my self, i reseted bios, c´took the cmos battery out for an hour, none of these things work, and the rest of the computer starts, but i get no picture on my display
Thanks in advance
Regards Broendum

Please use the profile button to create a sig so we can see what system components you have. The text below is from the forum guide:
"Before posting a question, create a signature using the Profile button at the top of the screen, and then clicking the Edit Signature button. In this signature include all the components that make up your system:
-Motherboard type and model (MSI 865PE Neo2 FIS2R)
-Bios type and revision (AMI rev 1.9)
-CPU type and model (AMD Athlon FX-51)
-Memory name, model and quantity (Kingston KHX4000K2)
-Video card name and model plus drivers and version (MSI GeForce4 Ti4800SE)
-Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. This information can be found on a sticker on the side of the supply.
-Hard Drives: Manufacturer, type and size and which IDE or SATA ports they are located on
-Optical Drives: Manufacturer and type and which IDE ports they are located on
-Operating system and service pack"
Give complete power supply specs (brand, model, and amps on 3.3, 5 and 12 volts as listed on the label on the side of the power supply).

Overclocking of MSI K8N neo platinium

MSI K8N neo platinium, Bios 1.4
Athlon64 3200+ 2000Mhz (200Mhz x10) 1MB cache, Clawhammer.
Geil 2x512MB DDR PC3200 400MHz Value CL2,5 5ns Aluminium Heat
Club3D 9800pro@xt
Hitachi Deskstar 7K250-160 160Gb 7200rpm 8Mb cache S-ATA
400w psu
Before when I had just one memory chip(512mb in slot 1), I had no problem to run 235Mhz x10. All I had to do was the following :
Put hdd in SATA 4
Set AGP to 68Mhz
Adjust cpu voltage from 1.45 - 1.55v
Set mem. clock to 166Mhz (sense it will increase as you raise the FSB)
Now I`ve bought one more identic memory chip. I have now 2x512MB memory placed in slot 1 and 3.
I followed the same steps as above, but with terrible results. Max 215Mhz x10 stable.
I`m pretty sure it`s not the memory chips that`s the problem, as they run stable
with original settings ( witch is higher speeds (200Mhz) than those I run on the memory when overclocking (166 - 195Mhz).
I would be greatfull for any tips or solutions that you might think would help me (and others) to reach better o/c results.

try slots 1+2 instead of 3, i have found that i can't oc very well in 1+3 either.

The optic exit doesn't work correctly K8N Neo Platinium

Hello
I am French and I have just acquired a Mother Board MSI K8N Neo Platiniums
Of that someone uses the exit Optic Spidf.
There is a problem with, she is restores sounds of Windows as well as the reading of the MP3 well.
But if one connects the exit of a map TV on the entrance Line In, the sound is play only on the exit Line Out, end not on the Optic exit.
On my old mother board Abit NF7S the sound play correctly on the Optic exit.
Of that someone to this problem.
:shy:It is domage that is there this small problem because the mother board is exelente
Stay up to forgive me my bad English I serve myself of a translator.

Quote from: sauria on 14-March-05, 11:32:18
Yeah, just doesn't like the 16M cache drive
I'll receive a maxtor 200gb 16mb sata (6B200S0) by the beginning of the week so I'll probably be working on the problem too

After updating to Firefox 4, I have lost 4 plugins/add ons due to their NOT being compatible. I can no longer play my bejewelled game. Please help me here. Can I get Firefx 3.6 back? Will that help me?

Firefox 3.6 allowed me to play games, Firefox 4 upgrade doesn't.Question
After updating to Firefox 4, I have lost 4 plugins/add ons due to their NOT being compatible. I can no longer play my bejewelled game. Please help me here. Can I get Firefx 3.6 back? Will that help me?

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Hi,
Any update here?
We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
In addition, please also check the information in the similar thread:
Dual Boot Windows 8 and Linux?
Best regards
Michael Shao
TechNet Community Support

I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

- If you used PhotoStream then try getting some of them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
You should still have your profile folder, so when you install 3. you will get your bookmarks and other user data back.
There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

I want to swap my 3rd generation 64gb 3G ipad, for the same as a mini. However cellular is confusing me, can I get 3G on a cellular ipad? Please help

I want to swap my 3rd generation 64gb 3G ipad, for the same as a mini. However cellular is confusing me, can I get 3G on a cellular ipad? Please help. Want to put the sim I take out of the ipad into the mini. On the apple shop website, the cellular model is £100 more expensive then the 3G one, however in currys it only sells cellular. I do not want to make a mistake it's a lot of money.

3G and cellular are different ways of referring to the same thing, they can use the mobile networks for data. The cellular/3G models are £100 more than the wifi-only version.
The 3rd gen iPad uses a micro-sim card, the Mini iPads use smaller nano-sim cards, so you won't ba able to use the same sim card.
Sim cards used in each device : http://support.apple.com/kb/HT5554

HT4623 Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later.

Have tried to restore settings due to problems, now Iphone shows Sim Failure, how can I get back to using my phone? Please help, its a business phone. :(

Hi, I have tried to restore settings on my Iphone due to problems I was having with the phone cutting out when talking on the phone, now Iphone shows Sim Failure, how can I get back to using my phone? Please help, its a business phone.

Hi jclarke64,
Thank you for contributing to the Apple Support Communities.
I'm sorry to hear that your iPhone 4s was lost, and glad that you were able to upgrade.
If your iPhone 4s was backed up to iCloud or using iTunes, you can restore the backed up data to your new phone.
See the steps in this article for help with restoring from a backup:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
All the best,
Jeremy

HT201304 I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Hi guys i update my IPOd 4G with the new iOS5 .I made a Backup and I load it but all my Photos are lost how can I get them back ??? thx for Help

HI guys
I need help.
I load the new iOS5 and I made an Backup and I load it too,but all my Photos are lost HOw can I get them Back ???
thx for help !!!!!

Which photos? If the missing photos were synced to the iPod then you have to get them from where you got them the first time. Synced photos are not in the backup that iTunes makes.
iTunes: About iOS backups

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

HT5661 i have a new iphone 5c replacing my iphone 4s. I backed up my 4s info on iCloud and then activated the new phone and downloaded from iclould. I then erased all info on my old 4s. However, I still can't get cellular service on my new phone. help

i have a new iphone 5c replacing my iphone 4s. I backed up my 4s info on iCloud and then activated the new phone and downloaded from iclould. I then erased all info on my old 4s. However, I still can't get cellular service on my new phone. help!

Keep powering your phone off and back on, it can take up to 2 hours for a normal service provider to finalize the activation process. When you got your new iPhone (congrats by the way) you should have received a little bubble that appeared that told you when the phone was activated, did you see that?

Can't get my K8n Neo Platinium to boot, fast help plz!

Similar Messages

Maybe you are looking for