Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?
Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?
Am i missing something here ? It's telling me Premiere Pro is using the aggregate audio device,
though not sure what that means ?
thanks!
If your model number isn't showing up in Printer Setup then you need to install the drivers. After you do that you should be able to setup your printer and print OK. Make sure Appletalk is checked in Airport in your Network Pref Pane.
Similar Messages
-
how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
hi all, i just want to know how can i get a MacBook pro with the configuration i want from apple retail store (in Munich) and not by order it online because in this case i will not be able to benefit from Global blue service for tax free from the airport when i leave Germany.
thanks in advance.You should have probably found out more specifically from the Apple Store just how you could do it online. The obvious solution is to order it from the Apple Danish website store, but I don't know if they ship internationally.
http://store.apple.com/dk/browse/home/shop_mac/family/macbook_air -
How can I get my MacBook to stay on and not sleep when lid is closed?
How can I get my MacBook to stay on and not sleep when lid is closed?
try this: http://www.macupdate.com/app/mac/37991/nosleep
-
How can I get my macbook pro running Lion to print on my HP photosmart 309a??
how can I get my macbook pro running Lion to print on my HP photosmart 309a??
Did you install the drivers? Or have Software Update install them? This printer is supported:
http://support.apple.com/kb/HT3669 -
I can't get my new iPad to record a video I see the video right above camera but it is not active yet I can't touch it to activate it.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
Where can I get a MacBook Pro retina 13 with Arabic/English keyboard.?
Where can I get a MacBook Pro retina 13 with Arabic/English keyboard.?
you have to go to Apple store online then you'll have to go to customize your MacBook Pro, there you choose Arabic keyboard, and it'll automatically contains both languages English and Arabic....... because the Latin letters must have for any computer to be used on email's website and etc. etc.
-
How can I get my MacBook wi-fi address ?
Hello
I need help !! How can I get my MacBook wi-fi address ?! Because am trying to register in a local network and I need my wi-fi address to add it .
ThanksHamed Rashed,
I'm not sure if you typed the proper term, I think it should be "MacBook MAC Address"? If this is what you mean then just go to Apple > System Preferences > Network > WiFi > Advanced > Hardware
Cheers. -
Bought a NuPower replacement battery, but can't get my MacBook to see it.
Hi Everyone!
Bought a NuPower replacement battery and installed it. Rebooted and the fans are running at full tilt. Did a SMC reset and a PRAM zap. Shut down. Restarted and the battery icon still has an X in it (no batteries available). Fans are running fast as well (again).
Repeated this a few times, but still can't get the MacBook to see it.
Here's the deets of my MacBook:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.007D.B03
SMC Version (system): 1.40f2Having problems as well.
It has been less then 48 hours that I have installed the new battery and it's still not charging. It says that I has 51% of charge, but it has not pass that number in the past 48 hours. I have reset the PRAM and SMC and no change.
When I go the System Information, I see that it recognize it, but it does not what to charge:
Model Information:
Serial Number: W024902CY6GOA
Manufacturer: Newer Tech
Device Name: ASMB013
Pack Lot Code: 3230
PCB Lot Code: 30db
Firmware Version: ddae
Hardware Revision: dac2
Cell Revision: 2b39
Charge Information:
Charge Remaining (mAh): 2814
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5505
Health Information:
Cycle Count: 1
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11769
AC Charger Information:
Connected: Yes
Charging: No -
I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
How can i get the rowNumber of a record in a table ?
How can i get the rowNumber of a record in a table ?
Marcel,
Please consult the "Tables" chapter in the UIX Developer's Guide. You can search for a method titled "doSelectionEvent" that will indicate how to deal with table selections.
Hope this helps,
Ryan Pollock -
Can't get iMovie to play after recorded on disk
Can't get iMovie to play after recorded on dvd
Hi ..
Better to post your topic in the iMovie community > iMovie for Mac: iLife: Apple Support Communities -
I can't get my macbook pro linked to my HP PPhotosmart 5510 printer
I can't get my macbook pro linked (wirelss) to my HP PPhotosmart 5510 printer? When I put the CD in the drive and try to install it says I need OSX 10.5 or 10.6. Please help!...
Welcome to Apple Support Communities.
Try downloading the latest drivers and updates, including a 'critical update' for OS X 10.7 'Lion' directly from HP:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=5063582#N179
If the direct link above doesn't work, you can navigate your way through about three layers of HP menus, starting at hp.com, then Printers, selecting your Photosmart model, and eventually reaching Software and Driver downloads, and OS X. -
I can't get my macbook to recognize my desktop pc with windows 7
i can't get my macbook to recognize my desktop pc with windows 7.
Mac 101: File sharing may have some hints.
Stefan -
How can i get my macbook pro too stay on and not sleep when lid is closed?
how can i get my macbook pro too stay on and not sleep when lid is closed?
If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor. At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on. I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable. If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes. It isn't a huge difference, but enough the lower the fan speeds.
Maybe you are looking for
-
How can i display the value fetched from my database back onto my combo box
i have saved a selected value from my combo box in my database. i want to display the same value on my combo box to the user on a jsp page. Can someone help me?
-
Help With adding a scrollbar to my applet
This is the source code of my applet.I wat to have an autoscroll on this applet i think it is usefull if i put here all the code for my project. ====================================================== Class ConsolePanel: The file defines a class Conso
-
I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.
-
Limiting the Reauthorization of credit card
Hi, Is there a way to Restrict the re authorization of credit card in the sales order when the difference between the Order amount and authorized amount are minimum. As an example sales order was created for $55 got authorized for $55. because of t
-
Good news About a week ago I noticed Nokia released a new release version of its maps. Last update I noticed was back around May 14 2010 with version 0.1.24.114 Since about 16 October 2010 the version available has been the new 0.1.25.114 Want to ins