Can't get my o/b network working ???

Everything working fine till i plug in the network cable to the onboard LAN. It says network cable not connected and when I click repair it shows "Windows renewing Ip address" which it never succeeds in doing ?????
I've got the Win XP SP2 standard fire wall only and I've tried with it switched off.
I've just changed to a new mobo, but never had this problem before with o/b LAN or SP2. It usually fires up straight away as soon as I plug in the cable. The cable connects direct to a hub and everone else connects to the internet via my pc.
If I start the pc with the network cable already plugged in, it spends 5 mins searching for something before I can run any other programs !

Quote
Originally posted by Supershanks
Have you installed the mobo drivers. which include the realtek network drivers
Yep, they're all in

Similar Messages

  • I just got a new itouch and i can't get imessage or facetime to work on my home network

    I just got a new itouch 4 and i can't get imessage and facetime to work on my home wifi network (Airport Express). I can't explain it. The itouch works fine otherwise uncluding the internet. Facetime and imessage work at the apple store so there must be something wrong with my home network. Please help if you can!
    iPod touch, iOS 5.0.1

    I changed the DNS to 8.8.8.8 as you suggested with no success, I even tried 8.8.8.8, 8.8.4.4 as suggested by others with no success either.  When I try and activate iMessage or Facetime, I still get the same message "could not sign in, please check your network connection".  The internet and Mail work perfectly fine on the iPod touch so the WiFi signal IS going through.  I am at a loss, any other suggestions would be more than welcome. Thanks!

  • I need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?  i use OS X

    i need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?

    With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
    Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
    So just go thru the motions of creating a proper printer instance:
    Make sure the Mac "sees" the printer on the network.
    System Preferences / Print & Scan
    Click on the + button on the left column
    Select the appropriate type of printer, will use IP for the rest of this
    Select HP Jetdirect - Socket, default for HP network printers
    Type the IP address or look it up
    Name the printer for easy identification on the print dialog
    Let the Mac identify the printer model or manually choose the driver
    Click Add.
    Once the instance pops up in the list, can click on Options & Supplies for further config.

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • How can I get a netgear wgps606 to work?

    How can I get a netgear wgps606 to work.  Just bought a new mac mini running Lion

    If the printer connects to the USB port of this print server then for many brands of printer you cannot use the vendor provided driver. Instead you need to look at an alternate driver that supports this type of network connection. Gutenprint is one option and it is preferred because it is free. In previous versions of OS X it was included with the OS but with Lion it is not included so you will have to download it from here.
    If the above does not help then please reply with the brand and model of printer you want to connect to the print server. And it would also help if you could provide a bit more detail as to what your issue is.

  • Can't get my iphone4 AirPrint to work with Canon mx712 printer

    Can't get my iphone4 AirPrint to work with canon mx712 printer
    I've reviewed all network, printer, phone settings

    airprint basic http://support.apple.com/kb/ht4356  see if that printer is compatible.
    airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
    If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • I can't get Norton Safe web to work. (I've just upgraded to Norton 360 from NIS 2011 on which Safe web worked OK).

    I can't get Norton Safe Web to work inFirefox since I upgraded to Norton 360. I was previously running NIS 2011 and it worked fine then.

    Actually when you have created an ad hoc network using Internet Sharing your Mac is supposed to have a self-assigned IP.
    What I suggest that you do is turn everything off on the Mac and tell the iPad to forget the Internet Sharing network, then restart the Mac and the iPad. Next slowly restart Internet Sharing on the Mac and when that is set up corectly try to connect to the network from scratch with the iPad. If you password protect your Internet Sharing network I suggest that you use the Other... option on the iPad; enter the network's name, select the correct protection scheme and finally enter the password and Join.
    This issue should have nothing to do with your modem or router, this is all Mac and iPad.

  • BlackBerry z10 can't get access to mobile network, please help!

    Hi, i got my unlocked z10 a few days ago and still i can't get access to mobile network. Only wifi have worked for me till now.. i used the same sim card as my old phone (where i i got access fine). I've tried rebooting and switched every setting on and off etc. Could any one please help me with this..

    Since you are using the same sim I suggest you contact your service provider to check your provisioning.
    Let me know if this help.

  • Can't get brand new WRT610N to work with Billion 7404 VGOM

    I already posted this on whirlpool, here are my posts:
    Hey All,
    Just bought a LinkSys WRT610n and I can't get the darned thing to work with my Billion 7404VGOM.
    At the moment I just want to network my pc to the LinkSys, LinkSys connects to my 7404 which is connected to the internet.
    I've tried using DHCP automatic connection with the WRT610N, but it just doesn't talk route any traffic to the 7404...and thus nothing to the internet.
    All cables and plugged in correctly, I tried the auto setup also but just can't figure the thing out.
    Any suggestions?
    Cheers,
    Ken
    I can't ping my 7404 modem from my PC when connected through the WRT610N. I can ping the WRT610N successfully, but when trying to ping the 7404 the WRT returns "Destination Host Unreachable"
    7404 is function fine if I just connect to it directly though.
    I don't understand, even If I couldn't get DHCP info working or syncing between both devices, it should still be able to ping it.....?
    Right, I just plugged in my netbook via network cable into the "Internet" port on my WRT610N. I try to ping the router using this (it doesn't get any DHCP settings from the router, so I just set it manually and use the WRT as default gateway ip)...I just get request timed out.
    I should be able to do this right?....starting to think my WRT610n has a dodgy "Internet" port.
    Any suggestions?

    If you connect your notebook via network cable into the "Internet" port on the WRT610N and if you ping the router it will not reply...also your Notebook will get any DHCP setting with this connection...However what exactly is Billion 7404VGOM ? A modem i guess!! Who is your ISP ?

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • After loading yosemite can't get permissions from any network PC - OK from MACs on network...any advice?

    after loading yosemite can't get permissions from any network PC - OK from MACs on network...any advice?

    would love to...way over my head so far...upgraded to Yosemite 10.10.2 - I have another MAC (motorola chipset...maybe 10.6?) and 3 PCs on the network...the older MAC linked up through the network just fine...
    I can see the Yosemite MAC on the PCs...I can open customer file folders (I am a printer) from the shared drive...I can drag files (let's just call them PDFs, they mostly are) to the MAC customer file...but if I try to open them from the PC I get an error message that says permission denied - or may be in use by another user. There are no other users. After I uploaded to Yosemite, I noticed most if not all drives and or folders had permissions changed to either no access or to read only...I've changed as many as I could find...drives, and folders...I can open those same files if I'm on the yosemite mac...Here's the catch, though...I was on a different floor and that PC can open a PDF on the Yosemite...but the RIP that prints our large format prints now won't print those files (whole RIP locks up) unless they are first dragged to the PC desktop...then all is fine. I thought it was MAC upgrade oriented, but I do have a PC that halfway works...I'm really stymied...

  • I can not get my regular mail to work since I changed to moved to iCloud. What do I need to do?

    I can not get my regular mail to work since i moved to iCloud. What do I need to do to update?

    Go to Settings>Wi-Fi.  At the bottom, make sure the "Ask to Join Networks" is ON.  When you are out and about, any network the iPad sees will be shown and it will ask you if you want to "Join" it.  If it is unsecure/free you tell it yes and you should connect.  However, if there is a little padlock looking icon shown with the network name, it means that it is a secure network and you need a password to join.  If you don't know it, you can't join.  At most Starbucks and such, the Wi-Fi is free and you should be able to simply connect.  Not really that hard.  There are not security settings on your iPad to adjust.  You'll figure it out.
    Best.

  • Want to take back because i can not get my ipod touch to work on this

    I can not get my ipod touch to work on this Linksys WRT54g router at all.I called them and was on the phone for a hour and still can not get it to work.And it is not the ipod because if i go outside i can get on with someone router outside.Can someone Please Please Help Me with this i would like to be able to use my rounter.
    Regards
        Chippy

    Chippy:
    I'll assume you've read the iPod manual. The directions I have seem fairly straightforward - iPod connects to a wireless network when it discovers one. Or, if that option is turned off, you have to manually connect it.
    When it comes to attaching to your router, you will need to know what kind of security the router is using, what the security password is and most important - the router's DHCP function must be activated so the iPod can acquire an IP address.
    If the iPod truly can handle the connection, and you have the necessary information I mentioned, it should connect without a problem. But since you can't connect, you need to review the settings I mentioned.
    It's possible there is some sort of issue with the router and the iPod. But it's my guess that the iPod is not acquiring an IP address because the router is not giving them out.
    Check these things out and post what you find. If we can figure out the answer, your post will be helpful to others who may run into the same problem.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for

  • Web Services Not Working because wwv_flow_collections view is empty

    Hello, I followed this example to try and get a web service running in my Application: http://apex.oracle.com/i/doc/advnc_rest_web_eg_2.htm When I run the page and enter the zip code 43221 they recommend with a radius of 5, I get no results. When deb

  • Error while Closing the Production order.

    Hi ,   We are doing operation Subcontracting Process. This process works on the basis of Production order, once the Production order generated automatically system generates a Purchase requisition which we are converting to Purchase order  and doing

  • Highlight texts in Adobe Reader and Acrobat

    I need to highlight the texts/words in Adobe Reader and Acrobat as well. Is there any common function/API available for both?

  • Cannot see iPhone movies within Aperture

    Movies just show up as black fields and a warning that it is a unsupported video format. But I only use the iPhone 4 at the moment. That should be no problem at all -- right? Thanks for any help!

  • Consignment Process with ERS

    Hi All, Is it possible to do the Consignment Process with ERS ? If yes, then what are the steps invloved in this process ? Thanks & Regards, Kiran.