Can't get my OCZ3P1333LVAM4GK stable on my 790FX-GD70 @ 1333MHz

After searching for the correct settings on the internet without descent results I thought it would be best to post my problem here.
I recently build a new system with these specs:
MSI 790FX-GD70 (bios v1.3)
AMD Phenom II 955BE
Scythe Mugen 2 cpu-cooler
OCZ3P1333LVAM4GK (4x 2 GB OCZ DDR3 PC3-10666 Platinum AMD Edition)
Samsung Spinpoint F1 500GB
Cooler Master Silent Pro 600W
XFX Radeon HD 4770 HD-477A-YDFC
Samsung SH-S223B dvd
Antec P182 with Noctua fans
Razer Tarantula US
Razer Lachesis
LaCiE 22" crt :P
OS: Windows 7 RC
The problem is as soon as I change my settings in the bios for 1333Mhz the system becomes unstable and Windows 7 RC won't even boot.
Here is what I did:
I've changed the FSB/DRM Ration to 1:3.33 so the adjusted DRAM Frequency was 1333MHz
Next I've changed the DRAM Voltage to 1.65V (should be correct according to the OCZ website)
After that I entered the Advance DRAM Configuration and changed CAS, TRCD, TRP and TRAS to 7,7,7,20 according OCZ's website and left the rest on "auto", I assume this is where it went wrong since a lot of settings are still default (auto)..
Could anybody help me with the right settings, would be a shame if let it run @ 1066MHz
Before I bought the mainboard MSI costumer service told me OCZ memory should run smooth @ 1333MHz.. so PLZ help me out 

Setting from 1T to 2T can give better stability. I have the 720BE and am OverClocked with a higher CPU core voltage (1.500v), yours shows 0.968v? If it continues you might want to do research on your 955BE and consider even slight Overclocking. Do not just start changing settings and voltages if you are not knowledgable because of the problems just changing things can do, but with knowledge from Reviews on the Board, Memory and CPU you can get different results. You seem to have OverClock memory in the 7's. Looking up your sticks they do show to be 1333 1.65v and designed for AMD.   
Good Luck.

Similar Messages

  • How can I get my iPad stable after 7.1.1 update?

    I am now using an unstable iPad after updating to 7.1.1   I have rest the iPad twice and restored backup.  Safari will turn off, forget the page it was on, have shaken video at times and at time Black Screen with Apple logo appears at random. 
    Is there a way to go back to previous iOS version?  Going into Genius Bar this AM

    apple doesn't support rolling back the iOS.
    See what they can do for you in the apple store. With the reset and restore you've done about all the user fixes you can do.

  • I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

    I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

    App Store->Purchased
    iTunes->Purchased->Download All

  • I'm having trouble using Firefox 4 with Tor Project software. Please help. Will there be an updated Tor Button add-on for Firefox 4.0 soon? If not, how can I get rid of 4.0 and go to an earlier, but stable Firefox version?

    I'm trying to use Tor Project for anonymous browsing. I updated my Firefox to 4.0, but I can't get a Tor Button to download, because it isn't available for Firefox 4.o.
    Will it be soon?
    If not, how do I go back to an earlier, stable version of Firefox that supports Tor Button browsing?
    Thanks much!

    See if the "stable" version released on 30 June is compatible with Firefox 5.0. That page doesn't mention which versions of Firefox it is compatible with, a serious oversight, IMO. <br />
    https://www.torproject.org/torbutton/
    Plus, it looks like that developer hasn't updated his AMO page in over a year, which makes it impossible for users of that add-on to get automatic updates as each new version of Firefox is released. <br />
    https://addons.mozilla.org/en-US/firefox/addon/torbutton/

  • Where can I get latest stable 3.5 binaries in zip download?

    I have a FF 3.6 installation that has been installed using the normal Windows installer. I have some major issues with older java versions under FF 3.6, so I also have a FF 3.5 installation. The 3.5 version is not really "installed", I simply downloaded the latest 3.5.11 nightly build in zip format, dumped it into a directory and I run it from there.
    This works great. The problem I have is that I don't want to run the nightly builds. I want to run the latest stable 3.5.x release, but I can't figure out where to download this in ZIP format. I can only find the windows installer version. Where can I find the latest stable build in ZIP format?

    You can get the zip build for 3.5.11 en-US from:
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/3.5.11-candidates/build1/unsigned/win32/en-US/
    The build 1 candidates became the final release for 3.5.11

  • How can I get "IMAQ Line Fit" stable (with the same points)

    How can I get "IMAQ Line Fit" stable (with the same points)
    I my vision applications I use a lot off times "IMAQ Line Fit"
    some times the results are not Stable.
    See vi and word document attached.
    When I take the same points but in a other order (sort)
    then suddenly all points are used.
    In this case I was looking for a edge in vertical direction (Y).
    I found the points but "IMAQ Line Fit" did not function well.
    I tried changing all settings like pixel radius and minimum score and
    also threshold and so on. But no result.
    Then I sorted the points reversed and that worked. See vi.
    I use labview Labview 8.6.0 and IMAQ machine vision.
    Maybe this problem is solved in a newer version.
    Please let me know.
    Thanks
    Attachments:
    TEST-imaq-line-fit-86.vi ‏169 KB
    IMAQ-Fit-Line-Problem-86.doc ‏230 KB

    Thank You for your reaction Hossein,
    This "one application" uses "Line fit" about 20 000 000 times a day.
    about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
    A algorithm should be:
    1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
    2e Accuracy
    3e Speed
    4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
    NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
    so in the future there will be a update.
    In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
      from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
    This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
    Because outliers should be rejected only Bisquare does this reasonable.
    This program does NOT USE "Minimum Score" and "Pixel Radius"
    Valid fit = When there are enough points within Outlier_Distance.
    Algorithm steps:
    - Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
    - If DeltaX <= DeltaY then SWAP X Y and later Swap back
    - Sort Points at on X value
    - First : Bisquare Linear Fit
    - Calculate distances to the found line for all points
    - Inliers: Points within Outlier_distance
    - Outliers: Points outside Outlier_Distance
    - Only use Inlier Points
    - Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
    - Second : Bisquare Linear Fit only with the Inlier Points
    - Results are from the second fit
    Warning : This Program is Not so accurate and Not so fast
    See attachments it is in labview 8.6
    If some has a improvement please let me know.
    Thanks
    Attachments:
    svi_fit_line_Bsquare_and_draw.vi ‏18 KB
    Fit_Line_Bisquare_Linear.vi ‏40 KB

  • (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.

    (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.
    I mostly use technology for education and professional audiovisuals and lights.
    I don't sync  music because I use music from at least 4 different computers. (manually mange music)
    I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
    I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
    I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
    Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
    When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
    Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them.  Those songs would play back okay on the iPad but were unplayable through the iTunes device view.  I had to delete the songs manually through the library along with the playlist and add them again. 
    These seem to be major stability bugs in the "new" music app and iTunes.  My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues. 
    Thank you for actually making it to the end of this manuscript of annoyances.

    Just wondered if anyone had any other suggestions.

  • My Macbook Pro will not boot up.  How can I get to the time machine back up?

    When I turn on my Macbook Pro, it gets to the gray screen with the Apple logo and the spinning beach ball and stays there.  I use Time Machine with a Seagate external harddrive to back up my files.  I at first thought recovery meant using Seagates's Replica software, so I followed the instructions, inserting the recovery CD and booting up to the C drive.  The Seagate tecnical support person informed me that I was in error and that because I was using Time Machine, the Replica recovery CD would not be useful to me.  Now I have two problems.  I can't boot up, and I can't get the Replica CD out of the C drive.  So I have several questions.  How do I remove the CD?  There doesn't appear to be a place to use the old paper clip method.  Once I've removed the CD, how do I reinstall the OS?  I don't seem to have a hard copy of Mavericks that should have come with this laptop.

    historyrocks wrote:
    How do I remove the CD? 
    Restart, hold the mouse button down as it boots, it should be ejected.
    historyrocks wrote:
    Once I've removed the CD, how do I reinstall the OS?  I don't seem to have a hard copy of Mavericks that should have come with this laptop.
    Lets take this step by step…
    Once the disk is ejected see if 10.9 can boot normally.
    If that fails let us know what happened.
    Power off & disconnect your Time Machine disk and any other external disks just for now (so we know it is safe & not causing this issue).
    Reboot & hold alt - it will take you into the 'boot picker' it will list all available boot disks. Make a note of how many disks appear and what the names are - let us know here.
    You could try picking the 'recovery partition' if available. That should eventually show you a screen where you can select Disk Utility in the list of options…
    In Disk Utility select the 'boot disk' – this is usually the item above 'Macintosh HD' (or whatever your boot disk is called).
    Select the 'First Aid' tab
    Repair any disk damage that is reported via 'verify'. Then select the 'Macintosh HD' & repair the permissions too.
    Recovery mode explained…
    http://support.apple.com/kb/HT4718
    If you have no recovery partition you can use 'Internet recovery mode' (Command+Option+R at startup) - this downloads enough to repair & install 10.9. Try to use an ethernet connection for the internet - it can be many times faster & more stable than wifi.
    Once that completes reboot, hold alt & select your main boot disk (maybe Macintosh HD) if it is available.
    The recovery partition can also be used to download & install 10.9.3. However you should probably see what state the Mac's boot disk is in. It's possible that erasing & reinstalling is the only option. If you go down this route you can restore the Time Machine backup, but it's better to see if it can be fixed first.

  • Can't get in and out markers to work

    In Pro 7, I can't find the In and Out markers on some clips I've downloaded off Limewire. When I go File:New audio and record blank noise for a few seconds, the markers appear. How can I get the markers and trim down my Limewire clips? Thanks
    g5 dual 1.8 tower, 512, 160hd   Mac OS X (10.3.9)  

    I've seen a few times in the past what you are talking about. But, the in and out sections would fade in and out.
    Try doing a save as to the movie and see if this makes the player a little more stable,,,,,,,,,,,,

  • I was ablet to download firefox on my galaxy tab several months ago, but now i can't get it on my coworkers tabs. how can i download to galaxy tab 10.1?

    I have firefox 10.0.5 on my galaxy tab 10.1. When we purchased more tablets last month, I have not been able to install firefox on them. It does not seem to be a supported device with the newest version of firefox mobile. How can I get firefox 10.0.5 or some other version of firefox that works on the galaxy tab 10.1? Firefox seems to be the most stable browser when there is an interuption in internet service. Is there a solution formy remaining tablets that don't have firefox?

    Try getting the latest version from this URL http://www.mozilla.org/en-US/firefox/fx/#mobile
    Hope it helps.

  • After one month or more with out .mac working, can we get our money back?

    It has been over one moth with out iweb working properly, I dont care of getting back the money of iLife, but yes to the money I am paing for my .mac account since It has been over one month that is not working and the only reason I have it is for my personal web site that is my work portal, everithing I do (Photography & Film) has to do with interactive web page, so Has been more than a month that I can't give my clients what they pay for and is really bad apple is not doing a thing.
    Ye s we have read a lot of postings that the problem is being fix as we think, but really that has been the case since a little bit more than 15 days and as today we have not seen a think fixed, still iWeb don't publish and we have tried everithing apple and users told us and still not a single good renponse.
    iWeb 2.0.2 was the worst upgrade from an apple software ever, can we get our .mac accounts money back so we can go to a better service?
    Sincerely, Adolfo Pardo: (www.cinematograf.com

    Actually when my account expires on April 18 2008 I am not renewing, any more If I don't get my money back soon I will cancel then my account and move to a more stable company, probably rapidwever or to a host way more stable yahoo or someone who hears the customers and has 24/7 service for errors on their system.

  • Can't get any video driver working (X-Server)

    Hi everybody (and thx for reading this),
    I'm about to install Arch Linux 64 Bit on a new machine, an Acer Aspire 8935G. I installed Arch Linux on several plattforms over the last months with help from the brilliant Wiki-Guide. Unfortunatley I can't figure out how to get the X-Server running this time, so I need a little (???) help here to point me in the right direction.
    System is up and running. Graphic Card is a ATI Mobility Radeon HD 4670 (and an Mobile Intel GM45). What I did so far was installing the radeonhd driver first (and later others, because radeonhd wouldn't work) and configure X with:
    # Xorg - configure
    Which resulted in a message of the X Protocol:
    List of video drivers:
    radeonhd
    intel
    ati
    radeon
    fbdev
    vesa
    after that I installed and ran HAL, to avoid problems with input hotplugging.
    Finally, to test the configuration:
    # X -config /root/xorg.conf.new
    (EE) RADEONHD(0): rhdAtomGetDDCIndex: GPIO_DDC Index 5 exceeds maximum 5
    (EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
    (EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
    (EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: c
    (EE) RADEONHD(0): ParseTable said: CD_INVALID_OPCODE
    (EE) RADEONHD(0): atomSetBacklightFromBIOSScratch: rhtAtomDigTransmitterControl(atomTransEnable) failed.
    ^C
    Playing around with vesa, intel and fbdev didn't bring me any further. Vesa and Intel led to a black screen without responding keys (hard reset is necessary every time) and FBDEV led to a error message:
    Primary device is not PCI
    (EE) FBDEV(0): FBIOBLANK: Invalid argument
    Maybe it's an issue with the integrated full hd monitor, because of the DDC-Message, but googling around didn't help for the moment. The hardware works with Linux, Mandriva 32-bit-Image ran out of the box with X-Server and KDE 4.2. But I would prefer an Installation of Arch Linux with the software, I really need and want.
    I will try to add the xorg.conf later on as I'm writing this on an other machine.
    Thx in advance for the help!
    EDIT (xorg.conf):
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    # Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "glx"
    Load "dri"
    Load "dbe"
    Load "record"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    #Section "Monitor"
    # Identifier "Monitor1"
    # VendorName "Monitor Vendor"
    # ModelName "Monitor Model"
    #EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Unknown Board"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card1"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768" "1280x1024"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Last edited by ewigkeit (2009-08-12 12:36:46)

    zenlord wrote:You do know that with the latest xserver-xorg your xorg.conf is of less relevance?
    Yes, I know. I also tried to get it working without an preconfigured xorg.conf. You know it... yeah... results in a black screen ;-).
    zenlord wrote:And are you using the latest software? I installed Debian stable on a G45-chipset with intel graphics last week and I had to use at least the 2.6.2-driver IIRC, or upon loading the (old) driver, the DVI-port was disconnected and I was left with a black screen, but otherwise working install
    Yesterday, I experimented with the Intel driver, because I found out that Mandriva also uses them, not fglrx like I thought. First I tried the xf86-video-intel. Have given me the typical X-Server feeling at start, probing the monitor I guess, than the backlight of the screen is on but the screen itself stays black. Fells like it's working, just the monitor is not respondig. Tried 1001 different screen settings, but the problem can't get solved. The same phenomenon can be experienced when usen the latest Intel-Git-Drivers from AUR. Last message of Xorg was: Setting up DRM Master or something like that. I will go and check it tonight again and report back.
    zenlord wrote:The Ati-drivers are not supported anymore, are you sure your chips is not too new for the opensource drivers?
    Like AdrenalineJunky stated radeonhd supports the card. I read about it yesterday.
    zenlord wrote:And if even vesa is failing you, than there's more to it.
    Where can I sign that? ;-)
    zenlord wrote:Have you tried vga for a driver?
    Not yet, will be done.
    zenlord wrote:What is the output of
    # cat /var/log/X.0.log | grep EE
    Vesa-Setup
    X.Org X Server 1.6.3
    Release Date: 2009-7-31
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux acer8935 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009 i686
    Build Date: 14 August 2009 11:31:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 17 18:43:33 2009
    (++) Using config file: "/root/xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Screen "Screen1" (1)
    (**) | |-->Monitor "Monitor1"
    (**) | |-->Device "Card1"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0xe40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:0:2:0) 8086:2a42:1025:019f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0:1:0:0) 1002:9488:1025:019f ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xf0400000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "fgl.renamed.libglx"
    (WW) Warning, couldn't open module fgl.renamed.libglx
    (II) UnloadModule: "fgl.renamed.libglx"
    (EE) Failed to load module "fgl.renamed.libglx" (module does not exist, 0)
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "fgl.renamed.libdri"
    (WW) Warning, couldn't open module fgl.renamed.libdri
    (II) UnloadModule: "fgl.renamed.libdri"
    (EE) Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    dlopen: /usr/lib/xorg/modules/extensions//libdri.so: cannot open shared object file: No such file or directory
    (EE) Failed to load /usr/lib/xorg/modules/extensions//libdri.so
    (II) UnloadModule: "dri"
    (EE) Failed to load module "dri" (loader failed, 7)
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is:
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) VESA(0): initializing int10

  • How can I get a book to open that is downloaded on my Ipad 3, I have uninstalled, reinstalled. Held the turn off button and home button down to reboot, nothing has helped.

    How can I get a book to open in my nook app, it downloaded, and installed, it just want open, I have never had this problem before.

    This is entirely my complaint.
    I have to sit without useable internet for 5 days when there is no fault, before anyone does anything about it ? BT visit the village to do something for another customer, mess up my perfectly working broadband, and then refuse to do anything about it for 5 days. And I pay full price during that time. Let's just hope they don't come back to do something else within those 5 days !!!
    There isn't a fault with the line, it is perfectly stable. I just need somebody to use common sense and set the IP profile back to what it was.
    If the system is so clever, it could at least try moving off 135k to 512k say after an hour or so.
    I will try using that link though and see if somebody can do something !!
    Frustrated is not the word ! If I ran my business like this I'd have no customers left. I'm pretty sure that's not the first time somebody has posted that on here

  • Showing as connected to the internet but can't get...

    Hi,
    This is my first post so apologies in advance if I'm using this incorrectly!
    I have BT Infinity and have had very few problems since getting it but for the last few days I have been unable to get online. I've called BT a few times and it is showing that I'm connected to the internet so they felt it may be an issue with the Home Hub so are sending me another. In the meantime I have bought another router and connected this to the modem etc and it is showing as being connected to the internet but I still am unable to get online. This is both when connected via an Ethernet cable or wirelessly and is the same across all devices (pc, ipad, iPhone etc). As I say, it is showing as connected to the internet but I can't get online at all. I can via BT Openzone so I know my various devices are working.
    I am almost certain the new Home Hub will not help. It's driving me mad. Any suggestions?
    Thanks in advance.

    If as you say,you have tried the HH and other routers,and have reset and rewired the connections to the OR modem with no joy,then it leaves only 2 possible causes.
    1)The RJ11 cable from the OR modem to the master socket might be faulty.
    2)But it is most likely to be a fault in the line from the master to the cabinet,or a very noisy line.
    You might need an engineer visit to check at the cab or the line.
    Your local network seems to be in order,as it is indicating a network connection,but if the line is faulty to the cab,then you would not be able to get a stable connection,or no internet.

  • Safari launches, but I can't get a new page to show

    We have five accounts on an iMac for our family. I can't get Safari to display a new page (or any page) on one of my kid's account. What could be the problem?

    Hi
    There may be a problem with one of that account's Safari files.
    Open his User Account and then the Finder:
    First, move the com.apple.safari.plist file found via the Finder>User Library>Preferences folder to the desktop and restart Safari. If Safari is stable, you'll need to reset their custom preferences in Safari, as well as any special settings in the Edit (spelling) or View menu (custom icons, status bar, etc.) If no change, move the file back to its original location, replacing the newly created file, then try the next suggestion.
    If the above doesn't work, go to the User Library>Caches>Safari and move that file to the desktop. Same routine as the previous step (restart Safari, etc). If no go, move the folder back etc.
    Post back

Maybe you are looking for