Can't get my pci modem to work in the ms - 6215

does anyone know how to get my pci modem to work in a ms - 6215, I've tried everything that I can think of including installing a modem  known to be good, since the motherboard is very unique in so that it has a riser that only has two pci slots on it and I've tried both of them, the os is windows me and when I first booted up all it found was an unknown pci card so I told it it was the modem and when I went to the modems in the control panel it tells me that it couldn't open the port even though the irq and com port info is the same in windows as to the post screen, the type of modem is a pctell 56k, and the guy who brought me this thing told me he didn't have the driver cd that came with it but since I have a external modem that worked with it I was able to update all of the motherboard drivers...
thanks
Michael Croskrey
([email protected])

Did you get a correct ME driver for your Modem?

Similar Messages

  • My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    Welcome to Apple Support Communities
    Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

  • Can't get wireless PCI card to work

    I bought a Sonnet wireless PCI card but we can't get it to work yet. Before I return it I wanted to check to make sure all the software was right.
    The AirPort utility is v4.2. The extensions are:
    Airport 3.4.7
    Airport2 4.0
    AirportFW 3.4.7
    AirportFWAP 3.4.7
    The system can see the card in the PCI slot (it didn't before upgrading the utility to 4.2, but the card doesn't detect any networks (and there are usually 3-4).
    I'm running 10.3.9 on a G4 MDD 2003.
    Thanks
    Tom

    Yes, it does have an external antenna.
    http://www.sonnettech.com/product/aria_pci.html

  • Can't get usb fax modem to work

    I have one of those small white apple phone/fax usb connectors, and I am trying to send a fax of a word doc but I can't get the process to work.
    It reports that there is no dial tone yet it is connected correctly from the computer to my phone line.
    I recall being able to do this a couple of years ago, but now I can't figure it out.
    Could there be a compatibility problem with the OS?
    I used it before with Tiger and now I am on Snow Leopard.
    Is there some setup that I need to do before using it?
    When I plug it in, it reports that there is a new network interface detected called external modem and it needs to be set up in network preferences.
    In the setup, it asks for a phone number an account name and a password, but which account is it referring to? My computer, my ISP, my network router?
    It then disconnects and reports that there is no dial tone and to try connecting the phone line again, but it is connected and is working.
    Thanks for any advice

    Thanks.
    It does appear correctly, and everything seems ok, but it doesn't work.
    I've been reading around, and apparently the apple usb fax modem doesn't work with digital phone lines.
    The last time I used it, in 2007-08, we had an analogue phone line but now we have a digital line as part of the Virgin media phone, cable and broadband service.
    Unless someone has had positive results getting it to connect to a digital phone line, I have to conclude, sadly, that it is now obsolete hardware.
    I can't even find a comparable item on the apple store website anymore, so they must know that it doesn't work with digital phone lines and stopped selling it.

  • Can't get Apple USB modem to work in Boot Camp

    I've been struggling to get an Internet connection under boot camp/Windows XP for several days. Have an Apple USB modem and installed all the Apple drivers. Apple tech support says they can't help me with Windows (cop out). Both Microsoft and my ISP tech support team have both been great and have spent hours trying to help me. Their final conclusion is that the modem is working fine, but the underlying flaw is the inability of an Apple system to run Windows. In desperation, I've ordered a US Robotics USB modem from the Mac/PC Connection that is both OS X and Windows XP compatible. It is on backorder for 2 weeks
    Any help you can give me in the meantime would be greatly appreciated! Glad I kept my old Dell!

    "I am confused, QuickDraw. If the poster cannot get online via Windows XP, how does he or she get the drivers?"
    I was speaking of the Boot Camp drivers that comes on the Leopard Disc. This could possibly be the answer to your troubles as well if you haven't already installed them yourself. After you've successfully installed Windows via Boot Camp, you need to boot up into Windows, then stick in your Leopard Disc and the drivers are supposed to install automatically. If after you've installed the BC drivers you still cannot get online via your router, then post back.
    Hope this helps.
    By the way, you really need to start your own thread. That way you'll have a better chance of being assisted from others. Just a suggestion.

  • How can I get my locked iPhone to work in the US

    Hi,
    I spoke with a genius at the montreal Apple Store, I asked about unlocks as I am moving to the states for work in the coming month. He mentioned that while carriers generally have to dot he unlocks they have unlocked international phones. My question is has anyone tried to dot his from Canada to the US. Also If you are still under warrenty and get a refurbished one in the US, at what point does it lock to your existing carrier. I was always confused as to how this works.Im sure there a lot of people who are wondering the same thing.
    Thank you

    Unlock can be done only by original Carrier. You should get
    this straightened out before leaving Canada. Warranty on your
    iPhone is not international - if you need any repair or replacement,
    you will have to return iPhone to Canada for this to be done.

  • Can\'t get both rom drives to work at the same time

    HI I  just finished building my new system with the MSI 6585 and everything works well EXCEPT my two roms drives.  I can get one to work or the other to work but not both at the same time.  I have the hard drive on the primary IDE and both rom drives on the secondary IDE.  I tried setting one up as master and one as slave.  I tried them the opposite way around.  I tried setting them both on cable select.  If I try to boot with both of them hooked up the computer refuses to boot past post .  Can anyone give me any suggestions please?  
    I am running XP pro with 512 megs of ddr ram .
    The cd burner is a liteon 40X12Xthe 48.  To be honest I cannot remember what brand the DVD player/cd player is ..
    Thank you
    Linda  :D

     :D Thank you thank you thank.. you .. just got back from the computer store.. LOVE that place.. with a brand spanking new round cable and voila .. both roms working..
    I had tried several cables I had here at home.. but I guess they are all hooped..  :(
     YEHAAAAAA..

  • How can I get my Firefox persona to work with the new version of Firefox?

    Everything was working fine, then my computer automatically updated Firefox and my persona background disappeared. It's listed as enabled on the add-ons backgrounds under add-ons manager. I have Foxkeh tail wag. I went and reinstalled it but it still doesn't come on. I went to the firefox personas page and tried to install a different persona. NONE of them work now. How can I get my persona background back?

    Fixed! Thank you!

  • I can't get Sort By Name to work on the Bookmarks Menu. How do you sort your folders alphabetically?

    I have my bookmarks sorted in folders. When I create a new folder it goes to the end of the list. I have tried going into Bookmarks/Show All Bookmarks, right click on Bookmarks Menu and Sort By Name but nothing happens. I have to manually move the newly created folder.
    Pat

    ''Pat L [[#answer-679152|said]]''
    <blockquote>
    ''FredMcD [[#answer-679014|said]]''
    <blockquote>
    Open the Bookmarks Manager. Open the folder branch tree. On this tree,
    select the folder you want with a right click.
    </blockquote>
    I have no problem sorting an individual folder by name, I can't get the list of folders to sort. As you can see by the attached images, several folders I've added are at the bottom of the folder list and even after I right click on Bookmark Menu/Sort By Name, they don't alphabetize.
    Pat
    </blockquote>
    Sorry, here is the other image.

  • I can not get my .me email to work since the IOS6 upgrade. Does anyone have the send mail and smtp info. I thought I knew it but I thought wrong.

    For some reason o can get my @me.com email to work. What are the send and receive strings?

    Do you have any security software installed, blocking these ports? http://support.apple.com/kb/TS3125

  • I can't get Norton Safe web to work. (I've just upgraded to Norton 360 from NIS 2011 on which Safe web worked OK).

    I can't get Norton Safe Web to work inFirefox since I upgraded to Norton 360. I was previously running NIS 2011 and it worked fine then.

    Actually when you have created an ad hoc network using Internet Sharing your Mac is supposed to have a self-assigned IP.
    What I suggest that you do is turn everything off on the Mac and tell the iPad to forget the Internet Sharing network, then restart the Mac and the iPad. Next slowly restart Internet Sharing on the Mac and when that is set up corectly try to connect to the network from scratch with the iPad. If you password protect your Internet Sharing network I suggest that you use the Other... option on the iPad; enter the network's name, select the correct protection scheme and finally enter the password and Join.
    This issue should have nothing to do with your modem or router, this is all Mac and iPad.

  • Can I get a replacement modem for free?

    I am currently using Westell 327W Modem for Verizon DSL. Can I get a replacement modem for free if I suspect my current one is not working properly?

    It's very possible you could get one sent to you for free. Doesn't hurt to try and ask for one over the phone. It might result in sending back the 327w however.
    What issue are you having with the 327w though? We might be able to solve it.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    I had a bright house cable modem that also had built-in wi-fi.
    Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
    A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
    I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
    That would be correct. Hopefully, they offer this type of option for their customers.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How can I get my web cam to work in Adobe Connect ?

    This is actually an end user's question that I am having trouble answering to...
    We use Adobe Connect to give online language classes, the end user is one of the students.
    I cannot find the right Support answer to give him.
    Problem:
    My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
    Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera. 
    I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software. 
    Even after removing all the old software, same result:  
    I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.   
    Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.  
    Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution? 
    I run Windows Vista with McAfee Internet Security Software.  I always reboot the computer before class and open no other programs other than Google Chrome. 
    I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software. 
    I test my camera before going online.  It always works fine.   Then I shut down the camera program and login into class.   
    When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

    Check to see if you have Google Voice installed. If so, remove it and see
    if your problem vanishes. If not Google Voice, check to see if you have
    any other communications software which interacts with your cam and
    disable it. This was the problem I had with a similar problem on a Mac.
    MosesJOI <[email protected]>
    10/13/11 12:08 PM
    Please respond to
    [email protected]
    To
    jsb152 <[email protected]>
    cc
    Subject
    How can I get my web cam to work in Adobe Connect ?
    Re: How can I get my web cam to work in Adobe Connect ?
    created by MosesJOI in General Discussion - View the full discussion
    Thanks a lot Heyward for the swift reply !
    I sent the advice out to the end user, but unfortunately this wasn't the
    solution.
    His reply is below :-
    The default resolution of my new camera is already set at 640x360, but I
    went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
    160x120) but none worked in the room - camera still showed up as black
    blank screen.  Also, as far as I can tell, I don’t have the option of
    adjusting the frame rate.
    I started playing around with my Internet Security Settings to see if they
    might be playing a role. So far, all to no avail.
    Hmm...quite a tricky one - webcams always are - maybe if he can find a way
    to adjust the frame rate (?).
    He's going to fiddle about with the settings a bit more and see if
    something does the trick.
    If anyone has had a similar problem and found an ingenious solution,
    please jot on a note on this thread.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3969561#3969561]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in General Discussion by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for