Can't get my website to load...get error message

I have built 3 websites in iweb. One of them is forwarded to an outside domain. I am having no problem accessing that website via the web. The other 2 however also keep getting forwarded to the outside domain. I think this is a simple fix but my tired old brain can't figure it out. I had bookmarked one of the websites @ http://web.mac.com/delaney303/donquadestudio/home.html....until last night I was able to access through the bookmark, but last night when I did that I got an error message that the website can't be found. Also i have no idea what the iweb address for the 3rd website is. The good news is that i have all of the website domains ....they are still there...they have not been deleted. Thanks for any help.

Tom Gewecke wrote:
when i am given the option to "visit site now" for either the mazza or don quade I get taken to the www.robertdelaneyarts.com site on the web
Don't use the Visit Site Now button. It does not take you the right place (and that really doesn't matter either). Just make browser bookmarks for the urls you gave me and use those.
Normally I use bookmarks, to me it is just easier, but I couldn't find the mazza site to bookmark it and yesterday the donquade site bookmark stopped working and I got a .mac error message saying the page wasn't there ; probably for one of 3 reasons a) never published b) moved since published c) don't have .mac account I know I have a .mac account and the site has been published so I think somehow it is in the wrong place. I will quit using visit site now.
I want those websites to be found only by using the full iweb/.mac url because they aren't completed.
That's the case now.
I now understand that very important difference and distinction, and I understand that i had the way they worked backwards in my mind.
when they are completed I will have them both forward to their own unique non .mac url.
No, you will forward different unique urls to these two .Mac sites.
gotcha
To get rid of the misleading stuff at the bottom of iWeb and in the Visit Site Now button, try going to your .Mac Account Settings and getting rid of the stuff you did in the Personal Domain area. You are not using CNAME and thus you should have nothing entered in this area.
I started to do that at this screen:and got this message:
Personal Domain
.Mac is configured to host your domain:
www.robertdelaneyarts.com
If you entered the correct settings at your registrar more than 48 hours ago and your iWeb site still doesn't appear at your domain, try these troubleshooting tips....Personal Domain
So I selected to remove the domain and got this message
Are you sure you want to remove this domain?
If you remove this domain, your .Mac site will no longer be viewable at www.robertdelaneyarts.com
and now I am a big 'fraidy cat to remove it because I want people to be able to see it when they type in www.robertdelaneyarts. What am I missing...could I have just moved my domains somewhere and the computer can't find them? I think I have caused this problem and am still not sure what the next steps to follow are.
Thank you very much for your help and your patience.

Similar Messages

  • Can we get error message when a component is entered twice in BOM??

    Hi,
    I have a BOM with around 150 components.
    Can we get an error or warning message when ever a component is entered twice in the component list????
    Thanks for your views.
    Naveen.

    In addition to the above points about enhancement PCSD0005, here is some more information that you may find useful.
    - The enhancement is called when you press enter after inserting a component.
    - The component name is stored in field rc29p-idnrk
    - Your programmer should know if it is possible to transfer this name to a table where it can be retained. Then when you add the next component, the exit can check against the previously inserted components. With a lot of components, you may get performance problems doing this though....
    Exit is called here:
    SAPLCSDI     FORM     MATERIAL_PRUEFEN
    CALL FUNCTION 'EXIT_SAPLCSDI_006'
       call customer-function '006'
            exporting                                          "note 611155
                 i_rc29p  = rc29p                              "note 611155
            importing
                 msg_data = msg_tmp
                 t_msg_data = lt_msg                           "note 942798
            tables
                 mat_bom_allocation = mastb_tmp
            changing

  • How can I get error message when calling pl/sql

    Hi,
    I call a pl/sql java wrapper generated by Rosetta.
    public static void startWf(
    OracleConnection _connection,
    BigDecimal p_goal_header_id,
    BigDecimal p_submiter_userid,
    String p_commit,
    String p_init_msg_list,
    String [] x_return_status,
    BigDecimal [] x_msg_count,
    String [] x_msg_data
    ) throws SQLException
    the pl/sql is written by the standard way of OAF backend,
    PROCEDURE start_wf ( p_goal_header_id in number
              ,p_submiter_userid     in number
    ,p_commit in varchar2 DEFAULT FND_API.G_TRUE
              ,p_init_msg_list in varchar2 DEFAULT FND_API.G_FALSE
    ,x_return_status out varchar2
    ,x_msg_count out number
    ,x_msg_data out varchar2);
    when running this procedure in TOAD, in case of error, following script can print error message:
    if l_return_status <> 'S' then
    dbms_output.put_line('Result');
    dbms_output.put_line('status: '||l_return_status);
    dbms_output.put_line('error count: '||l_msg_count);
    dbms_output.put_line('Loop Error');
    dbms_output.put_line('Err: '||fnd_msg_pub.get(-1,p_encoded=>'F'));
    for i in 2..l_msg_count loop
    dbms_output.put_line('Err: '||fnd_msg_pub.get(p_encoded=>'F'));
    end loop;
    end if;
    if l_return_status = 'S' then
    dbms_output.put_line('Success');
    end if;
    end;
    My question is when calling pl/sql java wrapper from Java, in case of Error, return_status="E", then in order to get exact error msg, is there any equivalent java method such as get error from pageContext or OADBTransaciton.. etc instead of calling again pl/sql fnd_msg_pub.get to get error msg?
    thanks
    Lei

    Lei,
    You can use
    checkErrors(OADBTransaction pTx,
    int pMessageCount,
    String pReturnStatus,
    String pMessageData)
    method in OAExceptionUtils Class.For details look at javadoc of OAExceptionUtils Class.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Can't get error message to stop appearing, missing font...

    I just updated to osx 10.5, and ilife 09 at the same time. I'm working in iWeb, and my previous sites have imported fine, and are uploading great, but I keep getting a message that I'm missing a font. Every time I click on a different page in my site I get the message, and even after I click continue and click on another page then come back, I get the same annoying message. The font is ArialMT and it seems to be the font that is the default for the template called "white".
    My question is how do I get the error message to stop appearing. I would replace the font but I do not have it. Does anyone know how to fix this problem?

    I have Arial Rounded MT Bold in my fonts list but not in my fonts folder. Its copyright © 1993, Monotype Typography ltd. It appears to be a Microsoft font. I must trash it in case it pollutes my Mac!
    Its sitting in a CD artwork folder and I must have imported it from somewhere at some time.
    Have you tried deleting the iWeb preference file - Home Folder/Library/Preferences/com.apple.iWeb.plist and restarting your Mac to see if that will fix it.
    The default font in iWeb is Arial Regular.

  • Torrent websites not loading, no error message just blank page

    Whenever I try to load any kind of '''torrent ''' sites, e.g., torrentz.eu, www.picktorrent.com, it doesn't load and just stop leaving a blank white screen. This problem has been occurring for last few weeks. I have the latest version of Firefox(4). There is no error message.
    Please Help.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I use Firefox to access my college's website and my account there. Ever since I downloaded the new Firefox, I can't log in to my account at my college and I get error messages. What's wrong?

    Ever since downloading the most recent firefox update, I have not been able to log in to my account at my college's website. I just get error messages every time. Even when I went to the Computer Sciences person at the college, he couldn't figure it out either. I need to be able to use Firefox to log in there because I have to download pdf files from there and Firefox is the only browser that seems to let me do that. But now that I can't even log in b/c of this stupid Firefox update, then its totally worthless to me.

    Hello sadiepix,
    The following article details several things that can be done to quell iTunes' constant need for authorization.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Allen

  • After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly.
    Tried removing Itunes and installing again, but get same errors

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    Hi keciakh,
    To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.   Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.  Next, please remove and reseat all of the ink tanks in the printer.  Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
    You need to prepare: three sheets of A4 or Letter-sized plain paper  
    1. Make sure that the power is turned on. 
    2. Open the paper output tray gently. 
    3. Select Roller cleaning.
    (1) Press the MENU button.
    (2) Select Setup, then press the OK button.  The setup menu screen will appear.
    (3) Select Maintenance, then press the OK button.  The Maintenance screen will appear.
    (4) Select Roller cleaning, then press the OK button.
    The confirmation screen will appear.
    (5) Select Yes, then press the OK button.
    (6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
    4. Clean the paper feed roller without paper.
    (1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The paper feed roller will rotate as it is cleaned.
    5. Clean the paper feed roller with paper.
    (1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The machine starts cleaning. The cleaning will be complete when the paper is ejected.
    (3) When the completion message appears, press the OK button.  The screen will return to the Maintenance screen.
    Reference
    To access other available functions, use the mode buttons or the MENU button.
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)

    I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)
    what can I do

    Search here or Google ... https://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • HT1926 ?Getting error message 6034 on new download - An app has made an attempt to load the C runtime library incorrectly.

    Getting error message R6034 when downloading today's iTunes update - An application has made an attempt to load the C runtime library incorrectly.. Please contact the application support team for more info.
    and
    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
    Did this still get error message on reinstall

    Wth regards to the R 6034 error message, I completed these steps for Windows 7; however, these are the applicable for Windows Vista and Windows 8. If you follow these steps in this order, you should be able to reinstall iTunes.
    1. Open "Computer" on "Start Menu".
    2. Open OS (C:) for the listing of files
    3. Scroll down to "Program Files (x86) and double click. Scroll down to the iTunes file and double click. You will see iTunes files. Move all of the the iTunes filles ending with.dll to your Desktop so that they are no longer in your program file listing. Also move the IT Detector to your Desktop. You can leave the remaining files. There should be a total of 5 files moved to the Desktop. This completes the first of 3 steps.
    Open "Control Panel" on the Start Menu.
    1. Locate "Programs and Features" then double click. Complete individual uninstalls for each of the following in this order: You can right click each item and select uninstall or click uninstall on the top of the page.
    -  Itunes
    -  Apple Software Update
    -  Apple Mobile Device Support
    -  Bonjour
    Before you close the Control Panel, verify that you have uninstalled by typing "iTunes" in the search section of this page. If anything is found, uninstall it. This completes the second step.
    Restart your computer. You should be able to download iTunes, now. When you go to the download page, you will not need to enter your e-mail address. This is the third step.

  • I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime librar

    I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
    2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
    I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
    Can anyone help me? Thank you. EFS1

    Hello DrJMDDC,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

Maybe you are looking for