Can't get mysql to connect to cf server

When setting up a mysql datasource in cf it will not
recognize the
configuration I give it. If I setup using a access db I have
no problems.
Seems to be an issue with the server! Using localhost does
not seem to want
to work. I haven't set this up for quite sometime but seems
to me I remember
using something other than localhost for a servername
before....
Any suggestions?
Thanks

Are you using MySQL 5? Reference this blog post for using the
proper JDBC driver:
http://www.wantonline.com/blog/index.cfm/2006/3/2/MySQL-5-and-CFMX-7

Similar Messages

Message says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

I just upgraded to the 5s. I have several mail accounts and I'm getting a message that says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

Well it does it every time I go to mail and is driving me nuts. It never happened on my iPhone5, just on this 5s.

My ipad can not get mail. the connection to the server failed. Even I follow ipad2 help and check everything.

my ipad2 can not get mail. the connection to the server failed. even I follow ipad2 help and check everything

Well it does it every time I go to mail and is driving me nuts. It never happened on my iPhone5, just on this 5s.

Can't get MAIl to connect to Onetel server

Both my wife's (MacBook) and my IMac will not connect to the Onetel POP outgoing server - we get error message
+OK rslrimap1msp All emails need to go out using gmail or MobileMe. The incoming is OK.
It has not always been this way only in the past year and I wonder if it is a problem with upgrading software. If I use WebMail it is OK and Onetel have checked everything and say that there is nothing they can do - very frustrating.
I have recently upgraded to OS 10.7.3 but this has not solved the problem. Is there anyway that I can reload MAIL? - or is there any other solution. The settings work prefect on our iphone.

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

I just purchased a new iPad but I get an error message cannot get mail the connection to the server failed.

I purchased a new iPad 128gb but I get an error message " can not get mail the connection to the server failed"
Can anyone tell me what this means?

Hi there Paradise bound,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W.

I can't get a database connection.

Background: I've already built two sites with databases using DW CS6, PHPMySQL, and the same hosting company, so I know they allow remote connections. (I'm developing using the remote host because I've never found a tutorial for how to move it all from local XAMPP to my host - but hey, it's been working fine so far.)
I set up the database using CPanel Databases, added the user and password, no problem. Went into PHP MySQL and added a table, logged out and back in, the table is there as defined.
In DW, I double-checked the testing server, tested the connection, and it connected successfully.
Then I opened a page for editing and added a database connection (all as I had done on the previous two sites that work fine). I named the connection, entered the user, the password and tried to SELECT a database. No luck. HTTP Error 404. I manually added the database (the only one) and clicked test. Again no luck. HPPT Error 404.
I double checked the testing server, double checked the DB information, and nothing seems to work.
Any clue what I'm doing wrong? Thanks so much if you can help.

UPDATE:
Okay, this is really getting weird. As a typcial computer nerd, I know there are many roads to success, so if one doesn't work, try another.
Trying a different solution, I opened a test.php page and wrote the following code:
<?php
echo "<p>Now testing database connection.</p>\n";
$db_server = "localhost";
$db_username = "mcsb831_mbradmin";
$db_password = "***(redacted)***";
$link = mysql_connect($db_server, $db_username, $db_password);
if (!$link) {
    echo "Could NOT connect.<br />\n";
}else{
    echo "Connected Successfully.<br />\n";
    mysql_close($link);
I loaded the page to the server and guess what? I got the message "Connected Successfully."
Hooray! Now I know the database server is running, and the database and user name and password are valid.
I went to the DW MbrConnect01.php file (the name of the CONNECTION file that Dreamweaver creates when I tried to make the connection through DW), and verified the database name, user name, and password were correct -- I copied and pasted them from the code above to make absolutely certain there were no transcription errors. Here's that file:
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_MbrConnec01 = "localhost";
$database_MbrConnec01 = "mcsb831_members";
$username_MbrConnec01 = "mcsb831_mbradmin";
$password_MbrConnec01 = "***(redacted)***";
$MbrConnec01 = mysql_pconnect($hostname_MbrConnec01, $username_MbrConnec01, $password_MbrConnec01) or trigger_error(mysql_error(),E_USER_ERROR);
?>
And guess what?
I GOT THE STINKING ERROR MESSAGE AGAIN!!
(See previous post for the full text of the message.
Yes, I checked the server using an FTP browser for the presence of the required files, and they are there.
Does anyone have a clue what's going on here? I would absolutely love to use DW's DB automation tools, but none of them will work if I can't get a DW connection to work.
I notice that my code uses mysql_connect while the DW-generated code uses mysql_pconnect (which is deprecated), could that be the culprit? How do I fix it if so?
PLEASE, can someone help?

Hey my brother just got an ipod touch and i can't get it to connect to itunes what to i do he's really excited HELP!! :)

hey my lil brother just got an ipod touch and its saying connect to itunes and its plugged into my computer and im at the itunes website but i can't get it to connect can anyone HELP ME??!! my mom said that she wants his ipod to be connected so that its on my itunes account so i can see if he buys anything.
PLEASE HELP ME !!!
~Maddie

iOS: Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar

Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?

Does your iPad see you network? If no, are you broadcasting its SSID?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying.

I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this? -Stu

Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

Bought New Extreme, works great with Macs but can't get PC to connect

I just bought a new Airport Extreme this weekend. As promised it was a breeze to set up and things were working well until I tried to connect my TIVO and my work laptop (Windows) to the network I set up. I can't get either to connect to either the base network or the guest network with any level of security set on it. My only success has been to configure the Guest Network without security on it (but I don't like that idea).
Please help.

I don't see "Equivalent Network Password" as a selection on the Base Network screen (or any of them for that matter).
Isn't this the password for my base station and not the wireless network? Maybe that is my problem. I am trying to connect to the network and not the Base Station? I am getting confused. What I really need to do is connect my work laptop (Windows based machine) and my TIVO to the wireless network I've created (Radio Mode selected to Automatic, Channel Selection to Automatic, Security set to WPA/WPA2 Personal).

Can't get mysql to connect to cf server

Similar Messages

Maybe you are looking for