Can't get old time machine backups to delete from the trash can

time machine backups won't delete from my trash can

You shouldn't be deleting old Tima Machine backups. When TM runs out of space it automatically deletes the oldest backups to make rioom for the new
http://pondini.org/TM/12.html

Similar Messages

  • How can I access old Time Machine backups after restoring from Time Machine?

    Just restored my iMac and I can only see "Now" when I enter Time Machine. How can I see all the backups and dates I had before I restored?

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • Can I Update Time Machine Backup Without Booting From The Source Drive

    Greetings,
    Can I update a time machine backup without booting from the original source drive?
    My main Macbook Pro internal drive seemed to have died. I had not backed up in months so my Time Machine backup was old.
    I replaced the drive with a new one and settled for restoring from the old TM backup because my latest info was on the dead drive and not backed up.
    I just plugged the "broken" drive into a dock and it mounted.
    It won't boot from the drive but I can mount it and copy from it so far.
    I now want to update my Time Machine backup with the info on the 'broken" drive while it's able to be mounted.
    How can I accomplish this without booting from the 'broken" drive and running time machine.
    Recap...
    I need to update a Time Machine backup using another hard drive without booting from the source (as I cannot). Both drives are connected via USB to my MBP and I am booted from another MBP. I want to end up with the newer info from the "broken" drive updating my older Time Machine backup.
    Thank You,
    SG

    Hi
    Time Machine will only be able to backup whilst booted into OSX, so unless you can mount the drive, and boot up the OS that is installed on the disk, then no, you will not be able to run a Time Machine backup of that drive.
    You could image the drive onto another using Disk Utility
    Cheers

  • Can I move old Time Machine backups that were USB to Network backups?

    I recently bought a new Airport Extreme and attached my 1TB WD HD to it for network file sharing and Time Machine backups. I had originally backed up my MacBook Pro with that external HD via USB directly connected to the laptop. I know (thanks to these foruns), that, since I'm now using Time Machine backups via wifi, the location of the backups is different and my wifi Time Machine can't access the backups on the HD that were made when it was directly connected.
    My question is: is there a way to move the old TM backups so that they can be recognized via wifi? If not no big deal, but then I would need to delete those backups, since they are taking up a big chunk of the external HD space. I saw a few forum posts about deleting TM backups and it seems that I would have to do it via TM itself...does that mean I have to reconnect the HD via USB to run TM so I can access those backups to delete them?
    Finally, once I do get to delete the old backups (or move them, if possible), is it safe to repartition the external HD so there is one partition for TM and one for storing files via my network? I've read about using Disk Utility to do this, but I haven't tried it yet.
    Thanks for any input.

    No, what you're doing is splitting the TM partition in half, so this will only work if you have more that 50% free space.
    See: Disk Utility - Add, Delete, and Resize Existing Volumes With Disk Utility
    My only concern about that would be that my other files would be on the same partition as the 'old' TM and thus I wouldn't want to delete it, which brings me back to my original issue of space being taken up on the drive.
    You should consider putting those files on their own partition, so think about spliiting the disk into 3 or more partitons, and 1st move all of your other files to the 3rd (last) partition.  You just need to decide how much space to allocate.
    With some limitations, you can do a lot with Partitoning without losing data, see: Disk Utility - What You Need to Know About Modifying Existing Volumes

  • How can I delete time machine backup folders moved into the trash from an external drive?

    I made the mistake of moving Time Machine backup files into the trash, but I can't seem to delete them. I tried the option key when clicking on "Empty Trash" and "Secure Empty Trash" (before and after rebooting), but that always led to error 8003. The files won't allow me to change their name. Using approchaes to Terminal from three different Mac-related webpages also failed. I also tried Trash It, but it seemed to be making little progress after letting it run 48 hours. Any other suggestions before calling Apple?

    Assuming these were not backups made over a network (thus not in a sparse bundle disk image), see #E6 in Time Machine - Troubleshooting.
    But any way you empty the trash on that disk/partition is probably going to take a very long time -- there's no doubt several hundred thousand files there, perhaps a million or more.
    You may have to just erase the disk (with Disk Utility) and start over.
    You really shouldn't have to delete Time Machine backups, as it will do that automatically when the destination gets full.  But if you really want to, see #12 in Time Machine - Frequently Asked Questions.

  • I deleted my Time Machine backups using Finder, now the trash won't empty

    Hello
    I've just been to the Apple genius bar and thought this was solved, there the trash emptied no problem.  But I realized that the problem has to do with two external drives that have time machine backups on them.  I deleted some of the older back ups because my drive was filling up and I didn't see any other way to delete them. 
    Now they can't be reinstated back where they were, and the trash won't empty using any method.  I've even tried the Terminal SUMO methods on here and other sites, and the Trashi It app, and Cocktail app - nothing works. 
    The only solutions I've found say to wipe your back up drive completely and start over but that is NOT an option as I have ALL of my photos on there.  I use my external drive for my images (I am a photographer) and use time machine to back up my MacBookPro onto there as well.  I had no idea deleting those was going to be an issue.  Now I've tried to delete other things on both external drives and they are all stuck in the trash. 
    Someone please help! 

    photogirl67 wrote:
    I use my external drive for my images (I am a photographer) and use time machine to back up my MacBookPro onto there as well.
    Not a good idea, as you've learned the hard way. 
    And especially bad in the same partition, as you can't just erase the TM partition.
    Plus, how do you back up the images?
    For best results, consider getting another external HD; one for the images, and one for TM.  Then you can have Time Machine back up both your Mac and the external.  See Time Machine - Frequently Asked Question #32 for details and considerations.
    But my question for Pondini is this - if I use that command will it erase that entire drive, or just the trash on it?
    Just the trash folders.  I've reworded those instructions a bit, hopefully more clearly and safely, and put them in #E6 of Time Machine - Troubleshooting.

  • Mavericks can't read old time machine backups

    I recently upgraded to Mavericks from 10.6.8 (Mac Pro Early 2008)
    I have an external USB backup HD
    I can see the files in the finder and I can also see the panels in the time machine window but the pre-10.9 ones have a black frame around them and I can't select them. If I shift-command-C the panels turn white and I can select the panels but I can't access the files in them.
    Any ideas?
    Thanks in advance

    In the Finder, right-click or control-click the folder icon and select
              Show View Options
    from the contextual menu. In the dialog that opens, select None from the Arrange by menu. Close the dialog, enter Time Machine, and try again.
    Another reason why items in a snapshot might not be selectable is that the time-travel view is open on a secondary display. Move it to the primary display, or if necessary, exit and disconnect the external display.

  • My daughter has a new ipod touch and when synced it had all of my iphone contacts. she deleted the ones she didn't want and they were removed from my phone as well. How can I get them back if they were deleted from the cloud? I also had them on my pc

    My daughter bought a new ipod touch and when synced received the contacts from my iphone. She deleted the ones she didn't want on her ipod and now they are gone from my iphone. I have the cloud and i thought back up on itunes. I have tried to re-sync and no luck. How can I get my contacts back?

    Your problem is that she used your icloud ID to connect to icloud and thus had all your data synced to her device.  Contacts are not saved in a backup to icloud, since they are stored independently in the Contacts section of icloud.  If someone deletes them, they are gone.  If you had them on the PC would they be available in some backup you frequently make of the PC?

  • Is there a way to get my photos off an old time machine backup from an external hard drive?

    Is there a way to get my photos off an old time machine backup from an external hard drive?

    You will have to connect the Time Machine HDD and click on the Icon.  You will see one folder called Backups.backupdb.  Click on that and you will have to continue until you find the home folder.  The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder.  You will have to drag that to your desk top.  Then you will have access to individual images.
    Ciao.

  • Can I upload a Time Machine backup (Passport) made on my computer to my husband's computer?

    I'm afraid that my present Macbook is starting to have problems.  I have an old Time Machine backup that I made on a Passport USB drive last year (using OS 10.6) so I can transfer the contents of my computer to my husband's Macbook (also OS 10.6).  But when I connected the Passport, I got a message saying, "This backup was created on a different computer.  If you reuse this backup it can no longer be used by the original computer."
    I'm not sure what the implications of this are.  I'm pretty sure I created the backup on my computer, but it might have been made on my husband's computer.  In any case, I'd like to make a new one on my computer and upload it to my husband's as planned.  Question:
    1.  Is there a way I can check to see which computer the backup was made on?
    2.  If it's an old backup of what's on my computer, is there a way I can update it, rather than go through the long process of creating a new backup?  (The USB drive is 1 TB, so an original backup takes forever!)
    3.  If it's a backup of what's on my husband's computer, can I overwrite it ("Reuse Backup"?) and then upload it to his computer?
    Thanks for any information out there!

    1. Hook up the drive to your husband's computer. If you don't get the same error message, then it is likely a backup of his computer. If you don't get an error message when attached to your husband's computer, enter Time Machine and check the admin user name.
    2. Depends on answer to first question. If it is your computer, start a backup.
    3. You can have 2 backups on the same drive. If it is your husband's backup, just start a new one for your computer.

  • How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

    How can I get my time machine to allow me to recover files again?
    After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
    I've searched and can not find a solution to the problem that's being encountered.

    Yeap that all makes sense now.
    Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
    Over wireless are you waiting for the indexing to finish.. ??
    Previous backup may not show for a couple of hours.
    Long short of it.. Mavericks version of TM is a pain.
    Sometimes it is easier to completely ignore the TM backup and do the restore manually.
    I have posted the details here. See if this helps.
    Can't access old files on time capsule

  • Help. I hit 'Restore All' in an old Time Machine backup

    I fully realize I made a terrible mistake. I had an iphoto library on my imac that i haven't backed up at all. I was playing around with an old time machine backup and i pressed restore all thinking it would warn me that i was going to overwrite my existing library. well, now i have lost a years worth of photos without having backed them up. my question is, is there anyway to retrieve them? the trash holds nothing. there is no backup save my iphone. when i hook that up it only shows 2 photos. hide already imported photos is NOT checked. i imagine i can pull them off. i'm wondering if they will be the full resolution however. i would like to UNDO the restore first if there is a way. if not i guess i have to do it with the iphone which i'm not sure if it had all the photos from my previous library anyways. please advise and i will love you forever.
    mark

    Welcome to the Apple Discussions. About the only recourse is to use a file recovery application like SubrosaSoft FileSalvage. You can run it in demo mode to verify that you can recover the photos you want before you have to pay for it.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Accessing Old Time Machine Backup From a New Account

    I have had problems with my old Account and decided to create a new Account. I can "see" the old Time Machine backup lists from the new Account, but can't open or restore them to the new Account. I get the message that I do not have sufficient privileges although I set the new Account up with Administrator privleges.

    You should have used Setup Assistant, not Migration Assistant, to transfer your data. I suggest you start over by booting into Recovery, erasing the startup volume, and installing OS X. When you reboot, Setup Assistant will start automatically. Follow the prompt to import data from a Time Machine snapshot. The backup history will then be inherited. The first backup will still be a full one; that can't be avoided.

  • Old Time Machine Backup Problems - Permissions

    Today, I figured out how to access my iPhoto Library photos from my old Time Machine backups. I was SO happy! The backups were from 2011 and earlier (hardrive crashed in May 2012). I had not done a Time Machine backup since 2011, so I decided to do a new backup today. After the backup finished, I decided to look at my old photos again (in the old backups) and when I tried to click on any of the files in the old backups, I get the message: The folder “Pictures” can’t be opened because you don’t have permission to see its contents.
    Of course, now I am crushed/frustrated because I do not understand why I cannot access the old backups anymore. *Note: the new backup is accessible.

    No problem.
    You probably need to use Browse Other Time Machine Disks and within that older backup go to User/Pictures and restore the file "iPhoto Library" to a separate folder on your drive (so as not to replace your current iPhoto library) and then look in that restored photo library.
    You need to do this in the Time Machine "Star Wars" interface from "Browse Other...."

  • Old Time Machine Backup

    OK this is complex so hope u can bear with me...
    I backed up my computer with Time Machine running lion, or maybe snow leapord.
    Now I have a new computer and the old one is gone, and it's running Mountain Lion.
    I'm just trying to get my old data back, but when I go to "browse other time machine backups" my old backup does not appear in the list.
    I've taken this disk to other computers before and accessed my old TM backup, I dunno why it's not working now.
    Migration Assistant I learned does work, however there are a few problems with that...
    First: Migration assistant did not copy my old iWeb site domain file to my new computer, so I'm hoping its still in there somewhere, becuase iCloud deleted my mobile me site by now.
    I also clicked every option therefore now I have two accounts. I DO NOT WANT TWO ACCOUNTS. I have now one with the old time machine backup restore, and one with the new computer account. I want one account, I don't want to have to relogin to have to check my old email box. Not only that the directories of one account are locked an not accessible by another... not good.
    Finnaly Time Machine just popped-up a window asking if I should "integrate" old time machine backups into this computer backup, saying that if I did this the old computer would not be synced with this new time machine backup. Since I don't have the old comptuter that should be fine. However I'm still hoping to find my old website on that disk somewhere, perhaps in a earlier version of the TM backup.
    If I do this "integration" will I be able to now browse my old time machine disk as I was able to before and on other computer's which run lion?
    Thanks.

    OK it's actually called "inherit" it says:
    Would you like this computer to inherit the backup history from "XX" on "X" backup disk?
    3 options
    don't back up now,     Create new backup,    Inherit backup history
    If I click inherit backup history... it will backup my new disk... and hopefully allow me to accesss the older one like i've been trying to do all along...

Maybe you are looking for

  • Printing on an HP Laserjet 5M through a Windows XP PC

    Hi, At our office we're running 10.3 and 10.4, as well as Windows XP. The XP computers are hooked up to the printer (HP Laserjet 5M & HP Deskjet 820 Cxi For Windows). Now, I've gotten my Mac (running 10.4) to actually see and communicate with the pri

  • Wireless mighty mouse resolution (in DPI)

    hi, anybody has an idea of what is the resolution of the mighty mouse? i have the wired one, i believe it was just 800 dpi... i'm wondering if the new one is any better... i'm quite used to gaming mice (razer & logitech) whch goes up to 1600 dpi, so

  • How can I burn a slideshow to a disc?

    So I made a slideshow using keynote. I've tried numerous times to burn it to a disc by dragging the saved slideshow on my desktop to the disc and then burning it, which is what Finder Help says to do. However, the disc won't read in a Windows compute

  • DRG-51030: wildcard query expansion after using @

    The following query returns one row: select * from userinterface where contains (searchtx, 'Mustermann within name and %gmx.de within email')>0; returns one row. If I add @ (=> %@gmx.de within email) the following error occurs: select * from userinte

  • Use of change log

    Dear Experts, Could you give some clues as to how change log is used . When do you pull data directly from it and what mechanism is used for pulling data from change log. Thanks, Suzie