Can't Get On Internet Using Modem after install 10.3.5 and10.3.9

Hello,
I will try to make this explanatory and as simple as possible.
My ibook was erased completely. SO, I installed 10.3.5 fresh. Then I verified permissions and installed the 10.3.9 update which is what I am using now. I tried to enter my internet connection settings (username, pass, phone number provider,etc).
When I press dial, I listened to the modem to see if it connects. It just dials loudly and the dial tone ignores the dialing and is still there(but you can hardly hear it). I tried changing the setting from tone to pulse dialing and it dialed and got the modem connecting sound but after two minutes of sound, it disconnects and says verify your modem settings and try again. So it gets to the Isp using pulse but then disconnects. It doesn't even dial correctly using tone dialing. The dialing is Loud as I don't know what, but the dial tone seems so low on the computer.
I was wondering if there was an update for the modem or firmware update or what because I cant get it to logon. All passwords are correct because I am using my 12 in ibook not with dual usb and the internet connection itself works fine.
Any suggestions? ( tired to use it changing the script to v.92 , v.90 or v.34)
14 in ibook 600 Mhz PowerPC G3 w/ Combo Drive   Mac OS X (10.3.9)   14" ibook Dual USB MOdem(v.92 Firmware Apple Version 2.6.3)

John Huber says:
I would download and reinstall the 10.3.9 Combined Update
Hope that helps.

Similar Messages

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • Can't get lightroom cc to load after install

    can't get lightroom cc to load after install

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • Can't get wifi working on X201 after installing Win 7 64 bit

    I've just purchased an X201 type 3294 with a 320gb HDD running Windows 7 64bit. Wifi works fine when running from the original HDD. I've pulled the HDD and replaced it with an SSD and installed windows 7 64 bit so I can use the 4gb RAM which came with the computer. I did a fresh install then started trying to install drivers. I started with Wifi first so I could download the rest of the drivers directly to the computer. I can't get wifi working after installing Windows 7 64bitfor some reason. I have the original HDD in an external enclosure so I can still access it.
    I can't figure out what drivers I need, or even what adapter I have on the computer.Lenovo's part look up tells me the adapter is part number 60Y3231, but that information seems to be useless. I've tried most of the drivers on Lenovo's driver page. I've tried just copying the C:/Drivers folder from the original HDD, and just about anything else I can thinkof. 
    Anyone know how I can get the right driver, or if this is even a driver problem? For what it's worth I'm not afraid of having to learn some terminal if I have to but I'm totally unfamiliar with Win 7. I have much more experience with XP, Vista and OSX/some Ubuntu.
    Solved!
    Go to Solution.

    Hello and welcome,
    If you have a wired connection you could try installing ThinkVantage System Update.  Run it and it should find all the appropriate drivers and install them for you.
    That FRU seems to be an Intel Centrino Advanced-N 6200. It's hard to tell from the drivers page which one to use.  Most of the README files include 6200.  My best guess:  http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1w218ww_s64.exe
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can't get updates to Photoshop CS5 after installing. When I download the updates, i get this.

    There was an error downloading this update. Please quit and try again later.  I have been trying for 2 days and keep getting the same thing. Is there a problem with the download server or what?

    Power off your computer. Power up your computer while pressing and holding pressed the option/alt key. When the boot manager appears, select OSX to boot.

  • Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

    Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

    Is this a POP account, or an IMAP account? Did you enable your account type in Gmail?
    You can verify whether or not you did (and enable it if you didn't) by logging into Gmail on the web. Then, open the 'Forwarding and POP/IMAP' tab on your 'Settings' page, and configure IMAP. After enabling IMAP in Gmail, make sure you click 'Save Changes' so Gmail can communicate with your mail client.

  • HT204306 How can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

    how can I get my old password back  after I have changed it? I cannot change it back because it has been used in the last year

    HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

  • My wi-fi worked fine on Airport Express two days ago.  Now the light is green, but I can't get the Internet on my satellite connection.  I've checked Network Preferences, Aiport Express menu, and the satellite tech support. The Ethernet connection works.

    My wi-fi connection from my iPad via the Airport Express Base Station on my home computer worked just fine until yesterday morning.  I have a Macintosh G5 with a satellite connection.  I could not get an Internet connection.  After using the Network Preferences and Aiport Express applications several times, then unplugging and replugging in the computer, satellite modem and Airport Express module, checking the satellite dish for any obstructions, and so on, the computer still wouldn't connect to the Internet.  (The green light was on in the Airport Express module.)  I called the satellite company technical support division last night.  The tech couldn't find any problem with the satellite connection.  When I plugged the satellite modem cord directly into the Ethernet outlet on my computer, I could pick up the Internet.
    Today, the Airport Express module still has a green light but still doesn't connect to the Internet.  The only thing I can think of is that lights went out for about 15 minutes yesterday morning.  All of my electronics, except the Aiport Express Base Station, are on surge protectors.  Why would the Airport Express module still have a green light if it was damaged by the electrical outage? 
    I bought the module in 2009.  I have never had problems with Apple equipment before this. Is this base station fixable?
    I would appreciate your suggestions.

    Hello everyone.  I too have experienced the same problem Mary described starting on the same day she mentioned January 12.  I have a G5 iMac, a G5 mini-mac, and a G4 laptop.  They were all working fine but all have mostly the same problem now in that the G4 does not connect at all and the G5s connect once in a while after restarts but do not maintain the connection.  In my case there was no power interruption.  In fact, the G4 laptop was not even connected to the home power connection.  My iPad2 and iPhone 4s wireless work fine and a wireless PC and Android tablet work fine as well.  The G5 and G4 work fine on an ethernet connection. ISP tech support (AT&T u-Verse) was very generous with their time in trying to solve my problem although it was established early on that their connection and equipment was working fine and that the problem was with my computers.  They walked me through a manual reset of all the particulars on IP addresses etc. so the problem was not related to that either. In the end ISP tech support concluded that the problem must lie with the Airport driver.  For some reason it changes the IP addresses to an incorrect address so it cannot connect.  Indeed when I tried the diagnostics on the G4 I got a window Pop-up that said an application had reset my settings. (In retrospect I seem to recall that I may have gotten that same message early on with the G5s but at that time I did not think much about it and went about trying to reset the settings but that process never concluded well) I think that the problem may be that there must have been an update of the Airport software that was not backward compatible with the G5 and older Macs.  I mention all this for two reasons.  First, perhaps someone out there who knows better than I do how to bring this to Apple's attention and perhaps they will address this.  Second, I would be curious to know whether there is anyway one can return a configuration on Macs to some earlier time period (as you can on PCs) when everything worked and then leave it that way foregoing any subseqent upgrades or any subsequent apps?

  • How can I get safe internet for protect my phone and PC

    How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud  but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone

    You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
    If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those.  Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
    The iPhone is NOT a backup device.

  • Ipad2 -can i connect to internet  using a data card

    ipad2 -can i connect to internet  using a data card

    This article:
    http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
    depending on your experience level should tell you all you need to know.
    You don't need mobile me, you just need to know your mac's ip and have vnc
    client software of some sort running on the machine you are travelling with.
    Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

  • Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

    Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • How can I get a family member back after being removed from family share?

    How can I get a family member back after being removed from family share?

    See [[Replace your Sync information]] but read the cautions carefully.
    * also see [[firefox Sync is not working]]
    It is always a useful precaution to make manual bookmarks backups
    * see [[Backing up and restoring bookmarks]]
    The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
    I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
    Presumably sync may be uninstalled or disabled like any other add-on
    *see [[Uninstalling add-ons]]

  • HT201441 i have bought a second hand iphone 4s which is stilllinked to previous owners itunes ID.I cant get his details off him as he has his money and is blanking me. I can't get anything on the phone after setting up the language.HELP!!

    I cannot activatea second hand iphone 4s as i don't have previous owners itunes ID. I can't get anything on the phone after setting the language as its asking for activation. Please can anyone help ???? Ideally i would like to get it back to factory settings and start afresh but right now i would settle for anything. Should say i only have the phone and charger, no box so no details

    Unfortunately, the only one who can help is the previous owner.  Otherwise you will not be able to activate and use the phone.  Apple can't/won't help you with this either.

  • I can't get the internet to work on my blackberry

    I got my new blackberry today after my previous one had software problems and even with the same contract i can't get my internet to work, its says "This is a wif-fi service.please ensure your device has an active wi-fi connection and try again." After checking the "manage connections" option it said my wif-fi was on but instead of having the usual tick it had this symbol "-" Can anyone guide me in the way to fix this?

    You need to call Orange and ask them to make certain that your BlackBerry Data plan is on your account.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

    I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

    Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
    (116847)

Maybe you are looking for

  • OS X Freezes often after clean install

    Hi, I've just done a clean install of Mavericks last week. Everything went fine, but I've had a system freeze almost every day since the installation whereas I'd never experienced one before. I am still able to move my mouse but everything else becom

  • 2 way databinding between DataGrid and DropDownList

    I am not getting anywhere with what I thought is the most simplest basic thing in the world. I have a ArrayCollection "employees" which is used to fill a DataGrid. The department is listed as an Integer value. I would like to display however the name

  • Does webcam signature need to be set up?

    I am trying to add my signature through webcam option, but Adop pro does not communicate with my laptop .webcam

  • Why wont assigned ringtones work after downloading the newest OS on iPhone 4

    I have had ringtones assigned to my contacts and they no longer work after I updated my iPhone 4 to iOS 5. It plays the default ringtone Marimba rather than playing the ringtone file assigned. I've tried reassigning them and it doesn't work.

  • What is the intention of the buttons next to my playlist name?

    When I'm playing a playlist or genre, there are buttons that look like "play" and "shuffle" next to the name of the playlist or genre. They seem to skip to the next song. Is that what they're supposed to do? It'd be nice if there were tooltips to tel