Can't get on internet!!!

I hope someone can help...I have the AEBS 802.11n and used several cable modems to connect. There's a green light from both the modem and the BS, but when I try to pull up Safari, it's blank. I've done a hard reset on the modem and cycled through, turning the modem on first, waiting, then turning on the BS. I thought Comcast was blocking the router, but they tell me that it shouldn't be blocked. Help! This is frustrating as ****!!! I went to the Apple store and it worked fine on their system....I've never been able to get online using the base station.

Hi WuBoy-
Greetings and welcome to the Apple boards.
This may help: Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
Luck-
-DadddyPaycheck

Similar Messages

How can I get safe internet for protect my phone and PC

How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone

You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device.

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV

Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Can we get satellite internet on ipod 4th generation?

can we get satellite internet on ipod 4th generation?

What happens when you try?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I can't get the internet to work on my blackberry

I got my new blackberry today after my previous one had software problems and even with the same contract i can't get my internet to work, its says "This is a wif-fi service.please ensure your device has an active wi-fi connection and try again." After checking the "manage connections" option it said my wif-fi was on but instead of having the usual tick it had this symbol "-" Can anyone guide me in the way to fix this?

You need to call Orange and ask them to make certain that your BlackBerry Data plan is on your account.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need to reinstall, but can't get on internet to try.....

I click on Mozilla icon to get on internet, and i get this error message:
XUL Runner: Error Platform 1.9.2.12 is not compatible 1.9.2.13....
I googled a fix, and it says to reinstall Mozilla, and it should be fine...
Only problem is that i don't have IE, and Mozilla was the only way i was able to get online. If I can't get on internet to go to site to do the fix, is there any other way i can do this?
Pleaseeeee help :)

Can anyone please reply from support team? I'm still having the above issue - thanks :)

Can´t get mobile internet function on ZTE OPEN C

Wi-fi functions fine. But I can´t get mobile internet running. My provider gave me following settings:
Internet
APN: Click
IP Address: assigned by the network
DNS 1 Adresse: 213.055.128.001
DNS 2 Adresse: 213.055.128.002
Benutzername: -
Passwort: -
Proxy: deactivated
But there are not such fields in data settings. There is only APN, Identifier, Password, HTTP proxy host/port and authentication.
Thank you for your advice
regards
JL

hi JL,
I would try putting click in as the APN in Settings > Cellular & Data > Data Settings and also in A-GPS settings under APN. Then enable the Data connection. Otherwise I might also try gprs.swisscom.ch or internet as the APN.
thanks!Michelle

IPad 2 and iPhone 4 - can't get an internet connection while tethered

I have an iPad 2 and an iPhone 4. Been using the iPhone to tether my iPad for a few weeks and all of a sudden when it's tethered I can't get an internet connection. Both iPhone and iPad are updated with latest software.

Hello Emma I presume your in the UK.
In the UK PPPoA is the standard PPPoE is not supported by many ISP's.
On your Mac just use DHCP in your Network settings. Do not use PPPoE.
Then login to your router's web configuration page. http://192.168.0.1 or http://192.168.1.1. Admin and Password are the usual login details for netgear routers.
use the following details
PPPoA
VC-Mux
Chap authentication
vpi and vci are 38,0
and of course use your isp username and password.
Post edited. I just noticed you had already figured out the correct details.
Message was edited by: Tim Haigh

Connected to WiFi but can not get the internet

I'm really hoping that someone can help. I bought my Ipad yesterday but am unable to connect to the internet. I have connected to my WiFi and have full signal strenght but when I go on Safari it tells me that I'm not connected. I have tried changing some of my settings but can only get as far as the message 'Cannot open page - Safari could not open the page because the server stopped responding' I also have the same problem with my Iphone and Ipod touch, I have never tried to sort these as don't need the internet on them. I have tried updating my Itunes and Ipad, both are now fully updated. My internet is working fine on any computer that is not apple... Please help, im pulling my hair out here.
Many thanks

What do you see if you go to Settings > WiFi and touch the ">" next to your network name?
If you touch the ">" you will get the details of your network connection. Things like the type of IP address allocation (DHCP, Static, Bootp), assigned IP Address, Subnet Mask, Router address, DNS addresses, etc.
Please report what you see there.
Also please identify the make, model and type of router you have.
Do you know what kind of security you are using on your router? None, WEP, WPA, WPA2?
When you said, "I have tried changing some of my settings", what did you do?

I live in an apartment with supplied internet. I have wireless network with no password. I have a wall outlet that I can plug into. When I plug in my TC I get a double NAT error. I try bridge mode, but I can't get the internet to work.

Can I get an explanation of what bridge mode is?
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Can I get a suggestion on how to use the TC as a different wireless device with it's own password without access to the cable modem. I only have access to a wall port.
I own many apple devices, iMac mid-2011, Macbook Air 2013, 2 ipads, and 2 iphones for the family, and Apple TV.
I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
I hope I have described this situation clearly enough.
Thanks

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

How can I get Windows Internet explorer on my MacBook air?

I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.

Or install Parallels 7 and then you can run IE just like any other app from within OS X itself. That costs around $50 plus the Windows license though.
Personally I have created an IE9 RDP (remote) App on my terminal server at work and just run that. Looks like it is running on my Mac natively.

My wi-fi worked fine on Airport Express two days ago. Now the light is green, but I can't get the Internet on my satellite connection. I've checked Network Preferences, Aiport Express menu, and the satellite tech support. The Ethernet connection works.

My wi-fi connection from my iPad via the Airport Express Base Station on my home computer worked just fine until yesterday morning. I have a Macintosh G5 with a satellite connection. I could not get an Internet connection. After using the Network Preferences and Aiport Express applications several times, then unplugging and replugging in the computer, satellite modem and Airport Express module, checking the satellite dish for any obstructions, and so on, the computer still wouldn't connect to the Internet. (The green light was on in the Airport Express module.) I called the satellite company technical support division last night. The tech couldn't find any problem with the satellite connection. When I plugged the satellite modem cord directly into the Ethernet outlet on my computer, I could pick up the Internet.
Today, the Airport Express module still has a green light but still doesn't connect to the Internet. The only thing I can think of is that lights went out for about 15 minutes yesterday morning. All of my electronics, except the Aiport Express Base Station, are on surge protectors. Why would the Airport Express module still have a green light if it was damaged by the electrical outage?
I bought the module in 2009. I have never had problems with Apple equipment before this. Is this base station fixable?
I would appreciate your suggestions.

Hello everyone. I too have experienced the same problem Mary described starting on the same day she mentioned January 12. I have a G5 iMac, a G5 mini-mac, and a G4 laptop. They were all working fine but all have mostly the same problem now in that the G4 does not connect at all and the G5s connect once in a while after restarts but do not maintain the connection. In my case there was no power interruption. In fact, the G4 laptop was not even connected to the home power connection. My iPad2 and iPhone 4s wireless work fine and a wireless PC and Android tablet work fine as well. The G5 and G4 work fine on an ethernet connection. ISP tech support (AT&T u-Verse) was very generous with their time in trying to solve my problem although it was established early on that their connection and equipment was working fine and that the problem was with my computers. They walked me through a manual reset of all the particulars on IP addresses etc. so the problem was not related to that either. In the end ISP tech support concluded that the problem must lie with the Airport driver. For some reason it changes the IP addresses to an incorrect address so it cannot connect. Indeed when I tried the diagnostics on the G4 I got a window Pop-up that said an application had reset my settings. (In retrospect I seem to recall that I may have gotten that same message early on with the G5s but at that time I did not think much about it and went about trying to reset the settings but that process never concluded well) I think that the problem may be that there must have been an update of the Airport software that was not backward compatible with the G5 and older Macs. I mention all this for two reasons. First, perhaps someone out there who knows better than I do how to bring this to Apple's attention and perhaps they will address this. Second, I would be curious to know whether there is anyway one can return a configuration on Macs to some earlier time period (as you can on PCs) when everything worked and then leave it that way foregoing any subseqent upgrades or any subsequent apps?

Server can't get to internet

File server:
SunFire X4140
OpenSolaris
SunOS 5.11 svn_111b
Hi,
I'm new to sysadmin, and very new to solaris. Any help would be very much appreciated - I'm trying to get a file server back on the internet that a couple dozen people are waiting for! It's part of a small ad hoc cluster in a rack. It had been working fine every since I started to take care of things part-time 6 months ago. The other day it just dropped off the internet. Then, when I tried a console GUI login at that point it froze up (the GUI, at least). I had to use the serial management port to do a graceful reboot.
There is an external switch to which all servers are connected, and a local switch used by several (but not all) of the servers in the rack with the file server. I've inherited this system and am unsure of the full rationale of the local switch, but imagine it's for faster local file transfer.
Other servers in the rack are online, BUT they're running linux variants. The file server runs opensolaris to be able to use zfs. There's another opensolaris server in the rack but it's stuck booting up kubuntu, looking for an NFS mount and I can't get it to skip the mount - haven't focused on this b/c it's non-essential.
The file server system (see above) boots and I can login, but cannot get online. I get these errors at boot:
1) The 'opensolaris' graphical boot screen (with the moving orange progress bar) seems to hang. After several minutes I hit return to enter CLI mode. At that point I see errors 2 and 3. I can login.
2) WARNING: /pci@0,0/pci10de,cb84@2 (ohci0): Connecting device on port 2 failed
I'm not sure if this is the built-in NIC's, or built-in rear USB ports - or something else. Haven't been able to determine for sure. The rear USB ports don't seem to be working - I have to plug the keyboard into the front usb port to get it to work, so maybe it's the usb.
3) in.ndpd[429]: interface nge[0|1|2|3] has been removed from the kernel. in.ndpd will no longer use it
The server has 4 built-in ethernet ports, no others. There are three ethernet cables plugged in - two for the external switch, one for the internal switch. The error for a given interface is only generated when there is a cable plugged into the port, and regardless of whether it goes to local or external switch. Then it repeats the error every minute for 2 of the 3 cables - haven't found a pattern as to which.
If I connect only one cable, either to internal or external switch, I don't get this error. But, I still don't IPv4 address, see below.
"ifconfig -a" output (transcribed)
(cables are plugged into ports 1,2 and 3 (as labeled on the hardware) but not 0):
lo0: flags=2001000849 <skip>
     inet 127.0.0.1 netmask ff000000
nge0: flags=1004803<UP,BROADCAST,MULTICAST,DHCP,IPv4> mtu 1500 index 2
     inet 0.0.0.0 netmask ff000000
     ether 0:21:28:3d:6d:2
nge1: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 3
     inet 0.0.0.0 netmask ff000000
     ether 0:21:28:3d:6d:3
nge2: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 4
     inet 0.0.0.0 netmask ff000000
     ether 0:21:28:3d:6d:4
nge3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
     inet 0.0.0.0 netmask ff000000
     ether 0:21:28:3d:6d:5
lo0: flags=2002000849 <skip>
     inet6 ::1/128
nge[1|2] [changes to the nge that was not most recently reported as removed by in.ndpd error.]: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index [3|4]
     inet6 fe80::221:28ff:fe3d:6d0[3|4]/10
     ether 0:21:28:3d:6d:4
Phew. Thanks very much for any help or suggestions!
-Michael
Edited by: 979786 on Jan 3, 2013 11:04 AM
Edited by: 979786 on Jan 3, 2013 11:08 AM
Edited by: 979786 on Jan 3, 2013 11:10 AM
Edited by: 979786 on Jan 3, 2013 12:09 PM

There might be some eventual replies to your inquiry, but you may need to realize that an online forum is the worst place to hope for help for business-critical issues. The anonymous nature of such a forum is that there is no obligation that there ever be a reply and there is no guarantee that replies are correct for your issue.
Such a system as you have described needs to be on a support contract (even though OpenSolaris isn't a supportable OS -- it's a discontinued Open Source experiment ). You need to use your support contract to contact Technical Support and open a Service Request to figure out why you have no IPV4 IP addresses, nor any current IPV6 IP addresses.
... but I do give you props for at least trying.
:)

I can't get the internet to work on my E5

Hi I bought an E5 today and I can't seem to get the internet to work on it. I have dowloaded the WAP and internet settings from that configurator thing but it just does not work. Can someone please help me!!

contacy your operator and ask them to send you the settings,they will come in the for of a text message then select save as default then restart the phone.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Can't get wireless internet ... Still.

*Issue: Macbook can't connect to internet through wireless network.*
I have seen numerous identical issues posted online with no solutions?
     1. All other computers (mac and pc) Ipod touch, ps3 still work on the wireless network
     2. The macbook in question did work in the past, had to do a reinstall due to issues and now
im having this problem.
     3. Internet works fine when wired to my wireless modem.
     4. My network icon is showing I am fully connected to the network (WEP key entered
without issues)
*My Setup:*
      1. Macbook (black) - OS X 10.5
      2. Speedstream wireless modem (Bell Sympatico Provider)
*Steps Tried to Resolve Issue (Seems like others have the same problem but no solutions out there?)*
     1. Hard reset of my modem (Reconfig the entire network)
     2. Reinstall OS X (Tried Tiger, and Leopard to setup the network)
     3. The common: Network diagnostics, setup assistant
     4. Tried connecting via DHCP and PPPOE
Im begging for some help on this one, it's really a pain to have a ethernet cord down the middle of my room.
I plan on finding a wi-fi hot spot and see if I can connect there to make sure its not a hardware issue.
Message was edited by: Murr
Message was edited by: Murr
Message was edited by: Murr

I just did another re-install for fun, I notice when plugged in I get an ip address of 192.168.2.10
When i enter my airport it assigns me a IP of 169.254.209.184 and a subnet of 255.255.0.0
I tried to re-new DHCP lease, copy all the ips manually with no success.
I also notice I cant access my router through my browser without being plugged into the net. Is this normal or a sign that im actually not connected to the network? or my card has problems?
Should i be able to access my router page without internet access?

How Can I Get My Internet Explorer To Work

How can I get Internet Explorer to work on my laptop? I have internet access through Firefox but cannot get online with my internet explorer. I have Windows 8.1 & Internet Explorer 11

Hi
What errors are you getting on IE? try resetting IE to default and then see if you can access the internet?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can't get on internet!!!

Similar Messages

Maybe you are looking for