Can't get on-line with Airport Extreem

Hi all,
this is my first post on this forum. I have tried to set-up a wired network using Airport Extreme between a Mac Mini and a G5 1.8 Dual. I was able to see each computer over the network but I could not get internet access.
I tried the unplug every thing route but that did not help. I am hooked up to the internet through a cable modem and can get to the internet without using the Airport Extreme going straight to the ethernet connection on the back of the computers.
What am I doing wrong?
Todd

Well now I can get on-line on the Mac Mini (the computer used to configure the Airport Extreme) but I still can't get on-line on the G5.
Todd

Similar Messages

Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

Please close this thread, I have managed to get a hold of a DVD including all the drivers, so I suppose that will work, if not one way then another.
Thank you for the quick answers.

Can not get on-lin with pppoe

i've set up ax with both admin utility and setup asst. to use pppoe... i still can not get on-line... it keeps looking for pppoe...
there is no place to input a password for the pppoe account. wondering if this is the cause of no connection to the internet...
mac's networking is set to airport using dhcp...
is this the right set up?
thanks,
henry
G5 1.8 DP, G4 1.25 DP, ibook g4 Mac OS X (10.4.5)

http://discussions.apple.com/thread.jspa?messageID=1117692&#1117692
henry b wrote -
"To check the PPPoE settings on the Airport Express, run the Airport Admin Utility. The default admin password is the word "public" without the quotes. Look under the Internet tab - it should show "connect using PPP over ethernet", and there will be a place to enter your internet account user name and password. "
after the account name input there is button "Change password..." is this account passward function or is this the ax password change function... a little bit confusing.
still not working will try turning everything off for the 20th time...

Can not get on line with new notebook

can not get on line. *we have verizon, *bought new router to see if that was problem. *bought airport express to see if that would help, *my son, bs in computer security, has spent days starting over redoing, *we used his dell notebook to go to apple site (what's wrong with that picture?) it did work for awhile, wanted me to start time machine, but would go on line thru safari? says ethernet cables not connected - he tried 2 different ones. i'm at the point of taking this piece of #$@% back to best buy.

Whoa, slow down. It's hard to understand exactly what's going on when you've explained your issue so unclearly.
Please describe exactly what network setup you have at the moment - you have Verizon DSL? What router are you using, are you wired or wireless, how is the Macbook connected to the network, how are your other computer(s) connected to the network? Let's take it step by step and I'm sure we can find out what's going on.
Matt

Can't get on line using Airport extreme.

Today I switched to cable modem and when I am connected directly to modem I get on line easily. However connecting via Airport extreme I can not get on line. Not sure if I am connected correctly. Which port does modem cable go in? Which port does cable to computer go in? Anyone else having this problem?

The cable modem must be cabled to the Airport Extreme WAN port - it is labelled with a "circle of dots" icon.
After cabling the two together, pull power to both the modem and the Base Station for five minutes or more. Then plug the modem into power and wait a minute. Then plug Base Station into power and wait for it to boot up. Then see what happens.

I can NOT get on Line with Firefox at all, just IE

my computer can get on line with no problen on internet explorer but firefox will not work at all. I have restored the computer & deleated firefox and reloaded it 2 times still No Good. I keep getting the message sauing it can not connect to firefox. please help, thanks, DanO'

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks

Have had my iPad 2 for 3 months. All of a sudden I can't get on line either with WiFi, which is working with my computer, or via the 3G celluar. What's wrong? How do I fix it?

I have had my iPad2 for 3 months. All of a sudden I can't get on line with either my WiFi, which works with my Mac, or 3G celluar. A locked icon appears in the upper right corner of my screen near the battery indicator? Apple support tells me to go "Settings" and click "Reset Network." Cannot find a "Reset Network" button. What can I do to get on line?

Thank you, Sir. You are a genius. I'm now on line and appreciate your help very much. The "reset" button was at the bottom, out of my sight, until I scrolled down as you suggested.

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

My iphone can not get in touch with the server. What can I do?

My Iphone can not get in touch with the server, when I am trying to accept terms and conditions. What can I do?

Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

Installed windows update, appears to have been June 16 2011 at 3:00.13 am now can't get on line I did a restore to previous of install and all worked oK

This started with windows 7 update June 16 2011
installed windows update, appears to have been June 16 2011 at 3:00.13 am now can't get on line I did a restore to previous of install and all worked oK But This morn I restarted my computer and update reinstalled and I don't have a restore point that will help (my bad)

These are the updates that were installed
Security Update for Windows 7 for x64-based Systems (KB2476490)
Installation date: ‎6/‎16/‎2011 11:31 PM
Security Update for Windows 7 for x64-based Systems (KB2544893)
Windows Malicious Software Removal Tool x64 - June 2011 (KB890830)
Security Update for Windows 7 for x64-based Systems (KB2535512)
Security Update for Windows 7 for x64-based Systems (KB2503665)
Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2544521)
Security Update for Windows 7 for x64-based Systems (KB2536276)
Security Update for Windows 7 for x64-based Systems (KB2525694)
Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2530548)
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2518867)
Update for Windows 7 for x64-based Systems (KB2488113)
Security Update for Windows 7 for x64-based Systems (KB2536275)
Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems (KB2518870)
Security Update for Windows 7 for x64-based Systems (KB2476490)
Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems (KB2478663)
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2478661)
Security Update for Windows 7 for x64-based Systems (KB2544893)
Installation date: ‎6/‎16/‎2011 3:00 AM

WRT54G CAN'T GET ON LINE

TRYING TO HOOK UP A SECOND LAPTOP TO THE ROUTER. OLDER ONE IS WORKING FINE. BUT NEW ONE CAN'T GET ON LINE. I HAVE FOUR SOLID GREEN BARS FOR SIGNAL. BUT IT WILL NOT CONNECT. ALSO CAN GET ON LIN. IF MY DAUGHTER TAKE THE LAPTOP OUT TO WORK SHE CAN GET ON
Message Edited by rzchrch on 04-02-2008 05:39 AM

What version is it ?
Check the firmware on the router and compare it with the list here.
For instructions to upgrade the firmware, click here.
After upgrading the firmware, you need to reset the router.
Press the reset button on the router for 30 seconds.
The Power light will start flashing.
Turn the Router and the Modem OFF.
Turn the modem ON first, wait for 10 seconds, turn the router ON, wait for 10 seconds, you should be ONLINE !!!
If not you'll need to clone the MAC address on the router.
Hope that helps.
C | EH
linksyshelp.blogspot.com

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'"

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'" Any help is appreciated.

OS is important.. What OS is on Mac and what is on the working macbook?
Was the Airport setup from the Macbook? That might be why it works from there..
Does the AE show up in Mac airport utility?
Can you mount the disk in finder and copy files to it/from it??
Did you try a TM reset after mounting in Finder.. so you know it is available?
What about a network reboot.. does it work post a restart for a few minutes/hours/days???

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

Can I get a MBP with 32 GB of RAM?

Can I get a MBP with 32 GB of RAM?: I know someone is going to give me a 1-word reply: "NO".
But what I want to encourage is a bit of a discussion here. Why not 32 gb RAM? Isn't it about time? It can't be the price or?? Can't the software handle it?
I keep things a long time--- 10yr+ PBG4; 5 year MBP-13" --- and that's great when I could (and have) upgraded with more RAM, SSD's etc. But today's Macs are basically sealed boxes like an iPad I believe (talking MacBOOK / MBP's here, not iMacs)(although they are fairly tightly sealed nowadays, too!). So I really have to purchase thinking "What will I need in 2020 or 2022?" -or- "How do I win the lottery?"
Any comments appreciated -- I was planning to upgrade my mid-2010 MBP from 8 gb to 16 gb RAM (yes, you can… just this one model of that age) --- but perhaps save the $150 and put it towards a new one--- then again, $150 is only about 5 hours of an Watch so might just do that anyway…
Thanks,
Steve
Friday 10 April 2015

I believe this IS a problem -- it is an issue I have about not being able to run things without enough RAM.
And I think "No you can't" is not a very helpful answer at all! In fact I prefaced my inquiry / problem with my first sentence thinking someone like you would give just such a reply---- was trying to avoid that!
There might be companies out there like OWC or Crucial or I don't know who -- that could / might / might some day provide increased RAM for existing MBP's just like for my MBP 2010 that is spec'd at 8 gb max RAM but there is a 16 gb solution out there.
So if anyone else would like to try to solve this problem for me --
Best regards,
Steve S.
Friday 10 April 2015
<Edited By Host>

Can't get on-line with Airport Extreem

Similar Messages

Maybe you are looking for