Can't get on the internet with my tmobile my touch 3g with android 2.2.1

i have a wrt54g2 v1 and all three of my laptops get on line wirelessly and one of my desktops gets on fine the other one is hooked to the router with a cat five cable my wifes htc tilt 2 cell phone with windows 6.1 gets gets on fine and i was allso was able to watch a video on you tube but when i try to connect my android 2.2.1 i keep getting searching for ip address found larrys network it keeps searching for three seconds then it says disconneted then it trys to search again and keeps searching and disconecting me untill i turn off wifi to save battery power i get on fine at work and at the public library but cant at home ive
tryed everything i know to do can someone heip please so dont have to go to the library to get on you tube

UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

Similar Messages

Help me please! I can't get on the internet with my new phone

Can someone please help me. I purchased my Blackberry Pearl from an on-line seller and it was suposed to be new. The problem comes when I try to set up my e-mail account....I go to my e-mail set-up option and the only one that it gives me is " I want to use a work e-mail account with a Blackberry Enterprise Server" . Obviously I do not want to do this but I have no other options. I can either hit close or next and next ask me for a password from my Enterprise Server administrator. I contacted Verizon and after much run around they finally told me that this phone was connected to another Blackberry account. I don't know if they really knew what they were talking about or if they just did not want to really help me because I did not upgrade my account and buy my phone from them. It sounds to me like they are trying to say the phone is stolen since they are saying that it is connected with another Blackberry account but if that were the case then Verizon would no be able to activate the phone and I can get it activated and make and receive calls but I cannot get on the internet with it. What good is a smart phone if you can't do everything it is supposed to do?

Hello,
Actually, what they told you is accurate. BIS accounts are what enable additional services (including Personal email). BIS accounts are all managed by the carriers. One BB, as defined by it's unique PIN, can have only one BIS account on one carrier in the world. If a BIS account exists somewhere else for a specific BB, then a carrier cannot create another account for it. That is the way it works. One of the reasons is of course to prevent the use of stolen items. That's not the only reason, but it's all irrelevant...if a BIS account exists somewhere for that BB, VZW cannot create one for it.
What you need to do is to contact the seller and hope they are reputable. They need to contact their carrier and have that BIS account shut down. Only then might VZW be able to create a BIS account for you.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't get on the internet with my new Imac.

My new Imac arrived yesterday. It has Tiger installed and a Leopard disk in the box. I had already downloaded my usb broadband modem's drivers for Tiger 10.4.5 from my Isp and thought it would be a simple matter to install them. No chance! They won't work. It's running Tiger 10.4.10. The modem doesn't sync up and the computer says it doesn't exist. Then I had the bright idea of upgrading to Leopard and using Boot Camp to install Windows XP. Big mistake! I've only got an ancient XP upgrade disk and you need a full SP2 one. But of course I didn't find that out untill I'd put the disk in the superdrive. So now it's stuck in there. Every time I switch the computer on it just boots into the windows setup. Pressing F3 just reboots it into Windows setup. Does anybody know how I can get that cd out of my drive? And how do I get on the internet? My usb modem and it's driver works fine on an old powerbook running Panther.

Hello again Nevertheless,
Probably! - Possibly! Almost certainly! Hmmm...
Belkin equipment has caused more problems than it had solved ( in my experience only )
Netgear equipment has solved all the problems I have, so far, encountered.
http://www.netgear.co.uk/wirelessadslrouterdg834g.php
It's easy. It works and I DONT work for them.
Regards once more.
Ian
Message was edited by a man in a dark suit, wearing Sunglasses.

I can't get on the internet with my phone?

Ok so I can't use my phones own internet, like the 3G? It says I have a connection, but the internet on my phone won't work. I also tried Wifi, and it says it is connected to wifi and the internet STILL won't work. I think I know the problem, I have a system update to install, but i can't install it cause i can't connect to the internet! Can someone help please? I am stuck I can still make calls and send texts.

UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

How can I get on the internet with my newly purchased used G5 Power Mac if my ethernet port failed?

We just bought our son a used G5 Power Mac, but when we got it home and tried to hook it up to the internet, no luck. We changed ethernet calbes, tried plugging directly into wall cable (by-passing router), even tried to do manual config, but no luck. I took it to the Genius Bar today and they said the ethernet plug was broken, and they did not have anything for a "vintage" machine like this.
The Genius Bar tech told me to buy a USB Network Adaptor, however no one (Best Buy, Radio Shack, even searched the internet) seems to have them for Mac. What can I do to get this puppy connected to the internet and how much would it cost? Did we get screwed?
Here is the seriel # + info that the seller gave us:
Seriel # G8******QPM
Mac OS X 10.5.8 (9L31a)
< S/N Edited By Host >
The Powermac G5 Dual Core 2.3 is powered by a "dual core" 2 GHz PowerPC 970MP (G5) processor with dual optimized AltiVec "Velocity Engine" vector processing units (one per core), four double-precision FPUs (two per core) and a 1 GHz frontside system bus. It 's configured with 4 GB of DDR SDRAM, a 160 GB (7200 RPM) Serial ATA hard drive, a 16X dual-layer "SuperDrive"
Connectivity includes USB 2.0, FireWire "400" and "800", Two DVI port, optical digital audio in/out, two independent Gigabit Ethernet ports. All of the "multiple core" equipped Power Macintosh G5 models have three open PCI-Express (PCIe) expansion slots. The Power Macintosh G5 Dual Core 2ghs uses an easy-to-upgrade "anodized aluminum alloy" case with a removable side panel for easy access to internal components. Likewise, it is divided into four different thermal zones with nine computer-controlled fans for optimum cooling.

Sorry, the 2ndlink should be...
http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
Fully Mac OS X supported with with on-screen
menu set-up and full user manual.
http://eshop.macsales.com/item/Asus/USBN10/
OS Support Mac 10.4/10.5/10.6
I don't have those exact models, but have seen others here use them.

I keep getting error message saying application did not initialize and I can't get on the internet with mozilla at all

when I click to open the internet through Mozilla Firefox, I get this message; "The application failed to initialize properly (0xc0000006). Click on OK to terminate the application."
When I do this, I have to click on it twice before the box goes away. I still can't access the internet through Mozilla.

Well, if they are private range IPs it does not make any difference. Everybody use them.
Anyway hide any personal information.

I can't get on the internet with firefox. It states that it is dormant

When I try to connect to the web, my connection says it is dormant. I have tried to uninstall firefox and re install it but my computer states that it is open and wont let me. I really like firefox and would like to continue using it. When I go into task manager it is not running. can you help me?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

I have a macbook and its hooked up to my airport express, however, I have a 5 year old dell pc that is connected to my wireless network, yet i'm unable to get on the internet with the pc. Does something need to be adjusted on the pc?

I have a macbook and its hooked into my airport express. I get on the internet through my network with no problem. Now I have a pc that says its connected to my network through airport express, yet I can't get on the internet with it - its around 5 years old with Windows XP. What should be adjusted on the pc ?

I have a macbook and its hooked into my airport express. I get on the internet through my network with no problem. Now I have a pc that says its connected to my network through airport express, yet I can't get on the internet with it - its around 5 years old with Windows XP. What should be adjusted on the pc ?

I downloaded the new version of firefox and now when I try to log on nothing happens its like it doesn't reconize the mouse click. I can get on the internet with explorer but no longer with firefox??

firefox never opens. its what I always would get on the internet with now the symble is there but its dead. i downloaded the latest version and then everything changed, when I logged off I could not get back on to the internet. I can get on the internet using enternet explorer but not mozilla firefox
I can't answer the first question below because it NEVER open anymore

I have the shortcuts on my browser to the sites that I go to frequently. It's when I press those buttons (which have always worked before and I checked their URLs) it takes me to the Yahoo Page not Found page. But then when I click the shortcut button again, it usually works.

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

Lots of hotels in the DR have WiFi. And there is plenty of cellular coverage in Santo Domingo (and elsewhere).
One thing to be careful of, the WiFi networks are usually not secured and are very vulnerable to people "listening" for passwords and user names, so don't do any financial transactions online and perhaps consider setting up some temporary passwords for the trip and changing them when you get home.
-dan

I work in an area where we use T one lines for internet. I do have an iphone and am able to get on the internet on it. Will I be able to get on the internet with an IPAD 3 that I have recently purchased.

I work in a company that has only t one connection for internet. There is no interet srvice provided in this area. I do however have and Iphone three and have no trouble getting on the internet with it. Will it be the same for the IPAD 3 that I just purchased?? Want to be able to use the IPAD 3 at work and get on the interent and if I can on the Iphone 3 I'm hoping the IPAD 3 will also. Any thoughts?

Either your phone is getting on wifi or you're using the cellular network to access the internet. If it's wifi, then you just need to connect the iPad to the same wifi. If you're using the phone's cellular connection to access the net, then you'll either need to get a tethering plan to use your phone as a mobile hotspot for your iPad, or get a device like the Mifi, which is a portable cellular wifi hotspot

Can connect to Linksys WRT54G but can't get to the internet.

PowerBook G4 17" 1GHz with OS 10.5.4
Linksys WRT54G v8.00.5
SpeedStream DSL Modem
I am having a strange issue. I am able to connect to my wireless network with my PowerBook and can see the Linksys setup page, but I cannot get on the internet. If I bypass the router I can get online with my PowerBook. If I use an ethernet cable connected to my Linksys I can get online with my PowerBook. My Sony Viao can connect wirelessly and get on the internet with no issue. My PlayStation 3 and PSP have no issues. It is solely this machine that is having the issue. I contacted Linksys and went through their troubleshooting to no avail.
Does anyone have any idea as to what the issue may be, or what I can try to resolve this issue? I have done everything I can think of and no luck. Any ideas?

Adam D wrote:
I pinged 208.67.219.99 and the following was returned:
PING 208.67.219.99 (208.67.219.99): 56 data bytes
64 bytes from 208.67.219.99: icmp_seq=0 ttl=47 time=88.752 ms
No error message was returned.
I plugged the IP address into Safari and, although there were 27 errors, the page loaded. I hadn't tried that before. Interesting.
The fact that the ping worked means you are connected to the Internet, and what is likely failing (causing the "You are not connected" message) is DNS name resolution.
DNS name resolution is what converts names like "www.opendns.com" to numbers, like the numbers I gave above, 208.67.219.99.
Changing your system to use the OpenDNS DNS servers, as directed above, will fix the name resolution issue on your system.

IPad can't get in the internet via a WPA2 Enterprise setup

I've seen some similar posts and no real answers. My Office just got set up with Wireless, it's cisco gear and using RADUIS to authenticate. What they told us to do on the windows boxes was this:
Connect to the SSID
use WPA2 Enterprise Authentication
TKIP Encryption
Use PEAP Authentication
Uncheck the "Validate Server Certificate"
Authentication Method is EAP-MSCHAP v2 on the PEAP properties screen
Following these instructions on Windows 7 I can get on the network.
I tried this on my iPad:
connected to the network
selected WPA2 Enterprise
It Prompted my for my login/password
I entered them....
Then I got a certificate and it asked me to accept/install it, and I did
Then it connects to the access point and gets a signal
Even though I am connected and authenticated I can't get on the internet, and I get no IP address. Not a DHCP issue since other devices work.
Any ideas on alternate configurations, or what I'd need to do with the iPhone Configuration Utility to get this working?

"Unsupported" device - I've heard that before, too many times... =)
So after thinking on everything you've tried, it's safe to say that your AP is running PEAPv0 with EAP-MSCHAPv2 for Authentication. This is good news - as it is probably the most widely used Enterprise WiFi configuration, iOS devices should absolutely be compatible with this. Getting a non-domain XP PC connected was a great idea, as I have discovered that Windows XP is kind of "loose" in the way it handles PEAP certificates - it will accept any certificate given to it by a RADIUS server without question. Undoubtedly a big security hole, but it does have the advantage of being "user friendly." I don't think Apple's implementation is quite as loose, so even though you are manually accepting one certificate, you probably need more to complete the chain of trust required for your device to authenticate the server. This is a requirement for PEAP to function.
So at this point, I think your best bet would be to migrate over to the Credentials tab. If you're running the iPhone Config Utility on a PC which connects to the AP, you already have the certificates in your trusted certificate store - so simply hit the add button and add any relevant certificates. For example, if your domain is named "corporate", import any certificates bearing that domain. Once you've done this, head over to the Trust tab under WiFi and check off your newly imported certificates as being trusted for your connection.
In addition, if you can figure out what the name of the RADIUS server on the other end of the AP is doing the authentication, add it under "Trusted Certificate Names" - if you don't know it, you can also add a wildcard like "*.corporate" to trust any servers in your domain. This shotgun approach is probably your best bet for making it go initially.
You will know this is all working when you no longer get the dialog on your iPad to accept the certificate, and hopefully, you get an IP address.
We're truly in the thick of it now, and this is my last idea - so if this does not work, we will need to call on those stronger than I with iOS networking... or, you can call up your IT department and start the conversation off with the words "I bet you can't figure this out" - that always gets IT people going =)
Best of luck!
Sources:
http://howto.techworld.com/mobile-wireless/3451/use-peap-for-wireless-authentica tion/
http://images.apple.com/ipad/business/pdf/iPadDeploymentScenarios.pdf

My wi fi is connecting up fine on my ipod but i can't get onto the internet

My wi fi is connecting up fine on my ipod but i can't get onto the internet. My ipod has been working fine until now and i have tried re- setting the network settings and all the other options that have been given but nothing seems to make any difference. If i try to get onto internet at all on my ipod, for instance, facebook and safari it will just come up no internet connection, even when the bar is full at the top. Can anyone help ?

Despite the WiFi sign at the top you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If this problem continues you should test your iPod on some other networks. Since you say your iPod was "working fine" either it or your router may have developed a hardware problem. If the iPod works OK on other networks your router may have a problem.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Can't get on the internet with my tmobile my touch 3g with android 2.2.1

Similar Messages

Maybe you are looking for