Can't get or send emails.  Network connection is correct.  Can't get Safari to work.  Home PC is good to go...Any suggestions?

I hate this IPAD!  I can't get emails or send them.  I have deleted the account and put it back in - didn't work.  I can't use Safari, because it says it's not connected to the internet.  I have plugged and unplugged the PC and it is working fine - emails in and out and internet up and running.  This has happened before and I was successful in getting back up and running.  any suggestions

You cannot send or receive emails or visit web pages in Safari because your iPad is not connected to the Internet.  They are related problems.  From your description of plugging and unplugging your PC, I assume your PC is connected to your router by wire, not by wireless.  So that is not going to be a good test of your wireless router, though it is a good test to see that the router is connecting to the Internet. I am, of course, assuming you have a wireless router.  The problem could be the wireless setting in your iPad or could be the router itself. 
On your iPad, go to Settings.
Is Wi Fi on? If not, turn it on and maybe that's all it needed.  Also make sure Airplane Mode is off.
If Wi Fi was already on, click on Wi Fi and see if your router shows up on the list.
Post back here to tell us how it is going.

Similar Messages

  • Hello.  I have an old G4 Tower at 10.4.11.  The password for Keychain has been lost.  How can I generate a new password for Keychain?  Every time I use Safari it want me to enter the password.  Any suggestions?  Thank you

    Hello.  I have an old G4 Tower at 10.4.11.  The password for Keychain has been lost.  How can I generate a new password for Keychain?  Every time I use Safari it wants me to enter the keychain password.  Any suggestions?  Thank you

    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    Keychain Access asks for keychain "login" after changing login password...
    http://support.apple.com/kb/HT1631
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • I can't get my Fantom X6 to connect with Logic Pro X since I updated to Mavericks iOS 10.9.2. Any Suggestions please?

    Hello Guys, I hope someone has experienced this issue or just know a fix or work around for it. Roland will not be developing new patches or what have you for the fantom x series and I figured thats the reason my keyboard is not working with this new OS. If you guys know a work around I would greatly appreciate it or tell what kind of keyboard or midi controller you are using so I could purchase one. Thanks

    X6 (via midi cable) plus good quality Audio/Midi interface (such as a Motu)  = No issues with LPX or Mavericks....
    In other words.. stop using USB to connect to Mac.... and you should be fine.

  • I have a network connection but I can't get email or a webpage?

    I have a network connection but I can't get email or a webpage?

    Phone and messages is a carrier issue. Sprint needs to check your account to make sure it is set up correctly. If everything looks good on their end, then do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, try it.

  • Can't send email while connected to friends wifi

    I can retrieve email, but can't send email while connected to friends wifi. I think I get message that says "cannot connect to server" (being comcast, which is my home ISP).

    It is possible that your friend's ISP is blocking outbound traffic on the port your mail service provider is expecting your outbound email. Another possibility is that your ISP does not accept outbound email from locations not on their network. Both of these are due to efforts by Internet service providers to curb spam.
    Contact the ISPs involved (I would suggest your own first) to find out what is happening.
    Best of luck.

  • After I check my network connections, I still can't get in to the itunes store?

    After I check my network connections, and I still cant get in to the iTunes store?

    http://www.apple.com/support/itunes/troubleshooting/

  • TS1398 I am unable to send email when connected to wifi

    HI
    I am unable to send a email when connected to any WI FI.  Have to discounnect from wi fi and then the message will send.
    On Bell in Canada and have set up correct SMTP settings as per bell
    Any help.

    It looks like Bell will only let the iPhone send emails over their cell network, see this thread -> Sending email issues
    You might be able to get some aditional info here -> Bell Customer Support Centre

  • TS2755 can't sign in on my phone. "please check network connection". but i can sign into iCloud on my phone & iMessages from my mac

    I can't sign in to iMessage on my phone. It says "please check network connection" however i can sign into iCloud on my phone & can sign into iMessages from my mac.
    Obvvioulsy I've tried a hard reset & I restored my phone to stock yesterday.

    So, considering there have been 20 odd pages on queries since I posted this I'm guessing I aint gonna get any help here, so does anyone know if it's possible to get help from Apple without having to pay? I cant get to a genius bar. I'm looking for an email address maybe? I've spent hours searching through forums & have scoured Apples support pages & as far as I can tell the only way to get anything from Apple is by paying them - I've had my phone over a year you see.
    Thanks in advance for any help.

  • I can receive but not send emails with my skynet account - what am I doing wrong ?

    I can receive but not send emails with my skynet account - what am I doing wrong ?
    I have no problems with my Yahoo account but I can not send emails with my skynet account.
    Actually in iPhone :
    Outgoing Mail Server > SMTP "relay.skynet.be"
    Primary server > Not Configured > Off
    Thank you ...

    When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
    Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

  • I keep trying to sign in and get error to check network connection and again

    I keep trying to sign in to face time on my mac pro and always get error to check network connection and again. I am using wi-fi, and I know my internet connection is good because I can access the web

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Email settings don't work, can't receive or send email

    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?

    Maryde wrote:
    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?
    Verizon should have no impact on your ability to use Outlook with your comcast.com account.  Verizon is only providing the pipe to Comcast, and I can get there there just fine.  Something must have been changed in your Outlook setup for your Comcast account (which is separate from the settings for your Verizon account) or Comcast must have changed something that broke your Comcast settings.
    If you provide your exact Outlook settings (inbound and outbound including servier names, ports, and SSL settings), perhaps someone can help.
    Also, can you successfully use the Verizon webmail to access your mailbox?

  • HT3748 Can't receive or send emails on Exchange using Mail 5.3 (and system 10.7)

    I have two Macs, one running on 10.6 and the other on 10.7 systems. I can receive and send Exchange emails on the 10.6 (mail 4.6) computer but not from the 10.7 (Mail 5.3) computer. The Account summary and set up is the same but I can not receive or send. I checked the account activities, all green. Checked the connection doctor, all green. Deleted adn re created the email account, the server accepted, yet I am still can't receive or send emails from the computer with 10.7 system. Any suggestions.

    Hi Latoque,  yes I did try to change it in both places but it doesn't seem  to retain it for the Outgoing server.When I go to Preferences> Account information,  the Incoming server password it very obvious but the Outgoing server password is not.While still on the Account information page I go down to the Outgoing Mail Server (SMTP): section and click on the two V's at the end of the entry and then click on the Edit SMTP Server List.....I then click on Advanced tab and enter the Outgoing password there below my User Name. I believe I am entering it in the correct place however it does not stay there and there is no reminder to Save when you exit the page.Please correct me if I an not entering the  password in the right place. Thanks

  • Moved to Microsoft Exchange now unable to get or send emails.

    Just switched over to Microsoft exchange and now I can't get or send email.  Unable to resolve with online tech tips.  Help!

    You must delete the email account, restart the phone by holding the HOME and SLEEP buttons until an Apple logo appears, then add the account back by selecting "Microsoft Exchange" as the account type.

  • 5th gen ipod can receive but not send emails

    5th gen ipod can receive but not send emails. I have iPad with same settings and no issues. Yet, I keep getting "cannot send mail" the user name or password for "[email protected]" is incorrect. Please assist. I am not running both accounts simultaneously

    See:
    iOS: Unable to send or receive email
    Did it work before?
    I suspect a error in the settings for the outgoing mail server.

  • Since "upgrading" to OSX ML, I can't receive or send email. Why?

    Since "upgrading" to OS X Mountain Lion, I can't receive or send emails in my @icoud or @me mail accounts and when I delete old messages in the Inbox, they come back the next time I check the Inbox. oes anyone know why the mail is this screwed-up? I've been forced to reroute all of my mail to my windows Outlook account to receive them.
    jrincr

    Go to System Preferences > iCloud and make sure your account info is correct, delete the password and reenter to be sure it is clean.  Go to Mail and then open Preferences and check the account informaiton for the iCloud account and again, delete and reenter the password for the account.  Sometimes the passwords get garbled during an upgrade.

Maybe you are looking for

  • Unable to capture video from my Sharp VL-NZ155 camera

    I noticed that is a pretty common statement around, even so I couldn't find an answer to my dilemma. I have the new Mac 24" (not that new anymore) with Firewire 800 cable, and I have Premiere Pro CS4 installed. I can control my Sharp VL-NZ155 from th

  • Nano 5th gen, not seen in windows or itunes, older ipod IS

    OK my ipod is a Nano 5th Gen and the Mrs is 2nd gen, as soon as i plug her ipod into my win 7 pc it comes up fine in both explorer and itunes so my system is working fine i guess. However when ever i plug my in nothing happen, not showing up in itune

  • Lion server - is it right for me?

    We are currently using a Mac Mini in our small office for file serviing. It is running 10.6 (NOT server). I have some software running on it that allows me to set up "mount points" for different user groups. I run the mini headless, and am able to "s

  • SAP Dialog Instance is not Starting - DISPATCHER EMERGENCY SHUTDOWN

    Hi All, We  are running on SAP ECC 6.0, Oracle 10, Windows 2003. We have One Central Instance an Two Dialog Instances, we shutdown the SAP system (  Jun 10 15:56:18 2008 ) to do an OFFLINE backup, now one of the Dialog Instances is no starting, we tr

  • Logical Standby Prereq

    I am evaluating Logical standby for an application, but I need to confirm if there is a prerequisite that both source and target databases need to be on the same os platform. My source server is HP UX 11.11 and Target server is HP Itanium ia64 11.31.