Can't get outlook 2010 to access email accounts in Exchange server 2010

Hello,
I have 3 email accounts defined in Exchange 2010.  Can't get outlook 2010 to connect to them via SMTP, IMAP, or POP3. Keep getting error can't find the exchange server.  I use other email clients like thunderbird, eClient and they connect fine.
Any ideas as to what's going on?  Is there ans SP1, SP2 for outlook?  Not ready for Exchange 2013 yet.
Thanks
John G
John Grace

Hi gptsbiz,
According to your description, I want to double confirm some points, please help to collect answers for following questions:
1. All account or some special account experience this issue?
2. What methods is used for outlook connection, IMAP or Outlook Anywhere?
3. How about the OWA?
Please make sure that the services related to Microsoft Exchange are running properly, especially the Microsoft Exchange Address Book and Microsoft Exchange RPC Client Access service.
Additional, please try to use Test-OutlookConnectivity and Test-OutlookWebServices to test end-to-end Microsoft Outlook client connectivity, availability service and etc. More details for this command, please refer to:
http://technet.microsoft.com/en-us/library/dd638082(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/bb124509(v=exchg.141).aspx
Note: please post relate error message for further troubleshooting.
Best Regards,
Allen Wang

Similar Messages

  • Can I get imap added to my email account config?

    Can I get imap added to my email account w2psoftware.com

    Hi there.  I am trying to use OS X Mail to set up email via IMAP for Business Catalyst email, but I am getting an error when trying to connect to the IMAP server on port 143.  The Mail application connection doctor points to the incoming mail server as the problem.  SMTP seems to connect just fine.  I have also tried to connect via multiple ISPs and am getting the same issue.  All of my setup information looks to be just fine.  Any suggestions? 

  • BPEL email to MS Exchange Server 2010 - 421 response.

    SOA Suite 10G 10.1.3.4, MLR#8 applied.
    We have had email set up to send messages to a MS Exchange Server 2003 host ... and the configuration has worked for a couple of years.
    We did some re-configuration work about six weeks ago to file-persist the majority of JMS queues and topics, including jms/common/email.
    Last week, without notification, the Exchange Server was upgraded to MS Exchange 2010. We received messages with response code 421 when this occurred, since our application continued to go about it's business.
    Since then there have been some configuration problems at the Exchange side, but we continue to receive 421 response codes for periods of time, followed by periods where emails flow normally. Volume, by the way, is in excess of 10,000 emails per day.
    The Exchange Server people accuse our application of "opening too many connections" and tell me there is a limit of 20 connections. They do not seem to consider that this application has not changed in years, and has been working well till recently.
    Questions:
    1. How can I configure the email sending from BPEL to meet their 20 connections limit?
    2. Has file persistence of the jms queue resulted in a great deal of attempted re-sending each time BPEL is restarted?
    JT - if you want to help a pool-playing colleague from the capital that would be MUCH appreciated!

    I was able to solve this problem. Go to Setting--> General --> Reset --> Reset Network Settings. I hope this will work for you.

  • How to move all emails from mailbox to an external email account in Exchange Server 2007?

    I have a user who is leaving the university in a few days. The user would like to forward all of their old emails from their mailbox to their G-mail account. Will setting up email forwarding forward all of the old emails to the G-mail account or just the
    new emails that are received after setting up email forwarding? If forwarding isn't the correct solution; then what is? We are running Exchange Server 2007.

    No, as you've suspected the forwarding will only affect new messages coming into the mailbox, not existing ones. Additionally, if you did get all existing messages to forward to another account (you could probably do it by creating a rule in Outlook) then
    the gmail account would show every single one of them as arriving now, and lose their existing send date.
    Probably a better option would be to export the mailbox to .pst, and then assuming the user has their gmail account configured in Outlook somewhere as something other than POP3 they can then open the .pst file on their machine and copy the messages over
    to their gmail account, which I think would also preserve the original information.
    You could do that via the server using Export-Mailbox as described here
    http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx (note it has to be run from a 32-bit OS with the Exchange Management tools installed), or the user could just as easily do it themselves from within Outlook using the Export option.

  • Best practice for creating a new email address to Exchange Server 2010 for share point Library

    Hi,
    Please advise if there is any best practice for the above issue?
    Thanks 
    srabon

    Hi Srabon,
    Hope these are what you want.
    Use a cmdlet to Create a User account and Mailbox in Exchange 2010
    http://technet.microsoft.com/en-us/magazine/ff381465.aspx
    Create a Mailbox for an Existing User
    http://technet.microsoft.com/en-us/library/aa998319(v=exchg.141).aspx
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

    Hi
    Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange  Active Manager Server instances are created.
    Will any can tell me why i am not getting any instance for MSExchange  Active Manager  on Exchange Server 2010 SP1.
    Thanks
    Sandeep Gupta
    Sandeep Gupta

    We are getting the below error on HUB/CAS server past 4 days continuosly.
    Event ID- 106
    Source - MSExchange Common
    Description -
    Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
    a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
    1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
    MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
    5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
    1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
    4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
    1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
    4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
    2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
    for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
    name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
    categoryName)
    Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
    Could some one help me on the same.
    Above steps can be follow to avoid this error???
    Thanks in Advance.

  • Can i get Outlook 2010 on my Ipad?

    I would like to switch my email over to my Ipad, but I can't find a way to get Outlook Express 2010 on.  Help, please????

    Outlook 2010 is a Windows-only program and will not run on your iPad. Just set up Mail on your iPad to your email account:
    http://support.apple.com/kb/HT4810
    If you have an Outlook.com or other email account provided by Microsoft, see:
    http://support.apple.com/kb/HT1694
    Regards.

  • Can LabVIEW send an email through Microsoft Exchange server without an account set up in Outlook?

    I've found sample code that shows how to send email through Outlook using LabVIEW.  On any computer I log into on our network, my profile loads and I have access to the exchange server through Outlook so the code works.
    However, I am developing a program that will run on a lab computer with a generic PC login that is shared among everyone in the lab.  Exchange server/outlook is not set up for the generic user.
    Is it possible to have labVIEW send an email through the exchange server with a server name, username, and password coded into the executable?

    You would need to send a standard SMTP message via Exchange. The Exchange server will likely require authentication, so you won't be able to use the built-in SMTP VIs, as they do not support authentication. If you're on Windows you can use .NET (see this example), or use the OpenG SMTP VIs.

  • Can't receive email from external in mail exchange server 2010

    we are facing problems of not receiving email from external parties from the mail exchange server 2010 suddenly.
    we can send and received internal emails but not the external, anyone could help to provide solution.  we also have our own in-house server 2012.
    hoping to get a best solution with thanks.
    This topic first appeared in the Spiceworks Community

    we are facing problems of not receiving email from external parties from the mail exchange server 2010 suddenly.
    we can send and received internal emails but not the external, anyone could help to provide solution.  we also have our own in-house server 2012.
    hoping to get a best solution with thanks.
    This topic first appeared in the Spiceworks Community

  • My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    Hi Sister Kate,
    If you change the Apple ID you are using on an iPhone or other iOS device, there are several places you need to change it on the device. See this article -
    Apple ID: What to do after you change your Apple ID
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

    I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
    iPad

    I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
    I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

  • Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straig

    Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straight to my phone instead of my MacBook Pro. Help!!

    Any error message?

  • Exchange server 2010 can send email but can't receive email

    Hi, I currently built up the exchange server 2010 within Windows 2008 server R2..I followed the youtube exchange server guide and now I am able to receive and send email within the account I created .. I can send email to hotmail or gmail account that I
    have.  But I can't receive the emails from those.  And I have a free domain service from twbbs.org  My FQDN is: al7283.twbbs.org . and I 've setup the MX records on this even though I don't know if they are correct configuration. I've open up
    the ports that needed. I also created the MX records and A records within DNS server .. can anyone guide me and tell me what should I configure for this troublesome problem??

    ON your receive connector check the security.
    in console
    1) server config
    2) hub transport
    3) receive connectors (Default <server name>) this should be listning on port 25
    4) right click and properties
    5) select permission group tab
    6) Anonymous needs to be checked otherwise you will only receive email from servers that have a username/password on your email server. 
    7) Restart transport service and try again.
    Your DNS config looks over complicated create a MX record  10 called Mail.al7283.twbbs.org
    point to al7283.twbbs.org
    You don't need mail.al7283.twbbs.org "A record" or a MX pointing to 122.116.90.148, it's the same as the other MX record if one is down they both will be.

  • E72-can't get a list of suggested email addresses

    Hello Nokia Support,
    Since I upgraded to firmware 22.007 I can't get a list of suggested email addresses in the "TO" field from my contacts addressbook.
    I've tried to hard reset, and also tried to overwriting of the firmware at the dealer but no help!
    Also tried to erase my account at email.nokia.com
    I use Nokia Massaging and NOT exchange.
    My mailbox is Gmail.
    Thank you,
    Eran

    i have the same problem, but i have it also in MfE and other mailboxes.
    Did you get any feedback yet?

  • Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

    Hi,
    I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
    receive mails in and out of the domain.
    I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
    Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
    Can someone guide me so i can manage to work this out?
    Server 2008 -  192.168.1.250
    Registered Domain - disalfa.com
    Thank you in advance

    Hi ,
    I recommend you refer to the following article to configure your external mail flow:
    Configure Internet Mail Flow Directly Through a Hub Transport Server
    Prerequisites
    Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
    this step are outside the scope of this topic.
    Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
    about how to complete this step are outside the scope of this topic.
    Best regards,
    Niko Cheng
    TechNet Community Support

Maybe you are looking for