Can't get outlook express to work on networked Windows XP

I have just networked a windows XP PC to my mac.The internet works fine on the PC but I cant get the Email to work.Do I create a new account in Outlook Express on the PC and if so what settings do I enter?Cheers to any helpers out there
Imac Mac OS X (10.3.9)

You don't necessarily need the AirPort Setup
Assistant, you should be able to set up the AirPort
Express Base Station (AX) with the AirPort Admin
Utility...as it is a much more powerful tool. You
need to make sure that you are using the version for Windows. At this
time, the AirPort software is only supported for
Windows 2000 or XP. A Vista-version has not been
released.
I suggest the following...
- First, perform a "factory default" reset on the AX to get
it back to it's original "out-of-the-box" state.
- Next, temporarily connect your computer directly,
using an Ethernet cable, to the Ethernet port on the
AX during the set up phase.
- Then set up the AX as a "wireless client."
I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
Help!
Sony Vaio Windows Vista

Similar Messages

New router now can't get airport express to work

Att installed a new wireless router.
Everything else seems to be fine but can't get airport Express to communicate with My MAC. Green light on airport device. Just downloaded OX on Mac recently.
Any suggestions would be appreciated!

Reset the Express to factory and start over.. this is always required when you make major network changes.

Can't get Airport Express to work with Windows

I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to get the Airport Express Assistant, but I can't find it. I got the Airport Admin Utility, and that installed fine on Windows Vista. Then I installed what I thought was the Express Assistant, and it just seemed to change the Airport software in the start menu, but I still don't have the Assistant, only the Admin Utility. Anyway, I open the Admin Utility and it opens the Base Station Chooser. There is nothing there, so I rescan, and it seems to do nothing. It doesn't find anything anyway.
Where do I go from here? I am kind of stuck. I am trying this on a Windows Vista PC which is hardwired to a Linksys WRTSL54GS router. I have the airport express plugged in and the light is flashing Amber. I have a HP psc2410 plugged into the airport express that I would like to print wirelessly to.
Thanks for any help.

You don't necessarily need the AirPort Setup
Assistant, you should be able to set up the AirPort
Express Base Station (AX) with the AirPort Admin
Utility...as it is a much more powerful tool. You
need to make sure that you are using the version for Windows. At this
time, the AirPort software is only supported for
Windows 2000 or XP. A Vista-version has not been
released.
I suggest the following...
- First, perform a "factory default" reset on the AX to get
it back to it's original "out-of-the-box" state.
- Next, temporarily connect your computer directly,
using an Ethernet cable, to the Ethernet port on the
AX during the set up phase.
- Then set up the AX as a "wireless client."
I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
Help!
Sony Vaio Windows Vista

Can't Get Airport Express To Work With ATT's Uverse

For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1

+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress.

HELP! Can't Get Airport Express to work.

I used to have a full setup with Time Capsule wireless & Airport Express connected to my stereo. My Time Capsule died last year and I haven't used the Airport Express since. I wanted to set up a wireless network with it instead of having to keep my laptop on the ethernet. I reset the Airport to factory settings and set it up again but I can't get my MacBook to connect to the internet with it. I keep getting a conflicting network ID message. I've tried this before and couldn't get it to work so I just keep going back to ethernet.

And you have a DSL modem, correct?
Might you have the make and model number of this device handy?

Can't get airport express to work with new wireless router

I just swapped out a linksys wrt54gl for a linksys E1200 wireless router on my home network. My PCs and iPads, and TV all made the switch to the new network fine, but the airport express isn't working. All I want to use it for is to transfer iPad audio to my home speakers. but my iPad AirPlay shows the old Airport as an option, I can switch to the Airport, no sound comes out the home speakers, then the iPad reverts AirPlay back to iPad. This model Airport just has power, USB, and LANA ports, so it doesn't seem like it would be complicated. A CAT 5 cable goes from the airport WAN port to one of the ports on the back of the new wireless router. What did I overlook?

I thought I'd jump in here with you network experts for some help with a related networking problem.
Equipment: iMac 24-inch, Early 2009 2.93 GHz Intel Core 2 Duo; 2 MBP w/Retina Display; AirPort Express version 7.6.4 (Conncected Using: DHCP; Router Mode: DHCP and NAT); Comcast/Xfinity Gateway 1 Modem w/2.4 GHz WiFi.
#1. Comcast forced me to change modems to their Gateway 1 saying mine was at “End of Life.” Previously, my home network was set up with AP Express and worked fine using my iMac as a server. After installing the Gateway 1, I could not get my network to work after repeated calls to their support, online chats, trial and error, reading community chats and articles, etc. I put the Comcast modem in passive mode using the “Bridge” setting and re-established my network with my AP. I’m using my iMac as a server for file sharing with my two MBP’s. The network isn’t recognized in sleep mode and will not wake from sleep and I can’t find it or Connect to Server when the computer is asleep. I’ve tried all combinations within the Energy Saver/Screen Saver/Security preferences. I’ve reset the SMC and other like resetting to factory defaults. How can I fix this and what are the correct settings for my home network to function again with my AP Express?
#2. TimeMachine stops doing backups when the computer is in sleep mode, understandably because I’m not making any changes on the iMac that need to be backed up. But using my laptops on the network, I am making changes in shared files that are hosted on the iMac that I would like backed up. I cannot get the schedule feature to work to wake up the computer long enough to do a backup nightly because, as a security feature, I log out after 30 minutes of inactivity. I understand the schedule doesn’t work unless you’re logged in. Is there a way for me to make this work?
Thanks!

Can't Get Airport Express to work as print server

Setting up new Imac, Time capsule and airport express for remote printing. Time capsule network established and airport express added to the network as a print server. Computer recognizes the printer that is attached to airport express and allows me to select it. But when I print nothing happens. Any thoughts on what I doing wrong or should try. All other set up has been easy and painless.

Are you using the Gutenprint driver.
If yes, it's a known bug, try the FixAirportPrinter Utility.
Related post: http://discussions.apple.com/thread.jspa?threadID=1455306&tstart=0

Bought new Macbook but can't get Aiport Express to work

Hello,
I just purchased a Macbook and am trying to connect wirelessly to my cable modem using my Airport Express that I was using with my iBook G4.
I had all my files transfered with Migration Assistant and when I opened Utilities under Applications and clicked on Airport Express Assistant I get a message "The AirPort Express Assistant requires AirPort %@ or later."
When I tried using the airport utility, it says that there is no base station found. I'm frustrated looking at the yellow blinking light on the airport express.
Could this mean that my airport express is too old for my new Macbook? It was purchased in 2004.
Any help at all would be greatly appreciated.
Thanks!

The Airport Express is not too old to use with your MacBook - it should work perfectly.
Try running an ethernet cable between the Airport Express and your MacBook, then run the Airport Utility and see if it can then "see" your Airport Express and allow you to configure it.

How can I get airport express to work on /31 subnet?

255.255.255.254
This is my ISP subnet. Airport picking up perfectly DHCP details- shows green light but unfortunately not 'passing' any internet traffic.

It's always a good idea to do a complete power recycle of your network components when changing configurations.
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AEBSn, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Can't get Email client to work with Network Solutions Email server

This is a new Email account started after I installed Snow Leopard. The Email server is Network Solutions. I have tried all afternoon and evening trying to set up just one account / mailbox on the Mac and I still haven't gotten it to work. I have been over the settings multiple times with Network Solutions and they tell me all the settings are correct, but still no joy. When I try to 'Get Mail' it simply spins its wheels for a minute or so then displays a (!); i.e. it times out and stops trying. I don't know if it is something about Network Solution's servers that is causing the problem or if it something wrong on my end (most likely). Any idea what I can try? Is there a log someplace that will tell me exactly what part of the process is failing?

Problem solved. For some reason the POP client had 'SSL' turned on. Guess I set it by accident during one of my many tries. All is well now.

I can't get itunes video to work with my windows 7 64 bit system?

I have a windows 7 64 bit operating system and have loaded the version of Itunes designated for 64 bit systems. All of my audio content seems to work fine, but my video content is almost non-functional. If I try to play a movie or tv show, I get the sound but no picture. In frustration, thinking that I would be unable to use the movies i bought on Itunes, I got a converter to change the video over to mp4 format. Well, as soon as I started trying to convert the files, the player started functioning. I notice that after using the converter, my itunes video files work okay. If I restart the machine and itunes without the converter running, I get the old problem of no picture but sound. As soon as I start converting a file, then thing starts working again.
A related issue, is that I can not see the Itunes Homepage. I can open specific pages related to searches, but the drop down menus and links are hit or miss as to whether they work or not.

hello dshultz58, does it work if you use the windows installer for plugin-based browsers from: [https://www.adobe.com/products/flashplayer/distribution3.html]?

How can i get ical invitations to work with outlook users?

how can i get ical invitations to work with outlook users?
I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

My Epson is able to do scans using Image Capture without any problems at all.
Allan

Can't get direct rendering to work

On my notebook with an Intel 945GM card, I can't get direct rendering to work.
I'm using the 'xf86-video-intel' driver.
/etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
# InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap"
Option "DontZoom"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "GLcore"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
DisplaySize 338 211
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
And here is /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
Build Date: 03 February 2008 02:54:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap"
(**) Option "DontZoom"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Mouse0"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
(II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
(II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0200000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (338, 211) mm
(**) intel(0): DPI set to (96, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "VertScrollDelta" "100"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(--) Touchpad touchpad found
(**) Touchpad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Could not init font path element /usr/share/fonts/Type1, removing from list!
AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Can anyone help me with this?
Last edited by bughunter2 (2008-03-03 01:06:30)

The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already)

Can't get my TC to work in Bridge mode...

I installed Time Capsule TC to my exsisting network, that has a Linksys router. Can't get my TC to work in Bridge mode. Suggestions?
I have the TC directly connected to the router and want to use the TC for wireless Time Machine back ups and to share other hardrives via
the network. I also have an old airport express for airplay speakers in one room. And an airport extreme that I thought I had set up to extend
the network wirelessly. I have yet to find a concise and clear list of steps to make this happen.
Any help would be appreciated.
Holly

The problem is the steps changed with the new airport utility..
I can tell you the steps on a 5.x utility. If you run Lion then download the real tool.
http://support.apple.com/kb/DL1482
Go to manual setup.. internet tab.. connection sharing.. select off, bridge mode.. update the TC..
Wasn't too hard was it.

Can't get SSL plug to work

Can anyone tell me why I can't get this freebie to work?
http://www.solid-state-logic.com/resources/lmc1plugin.html
I'm trying to use the AU version on an Intel iMac, it doesn't say anything about universal binary. My Logic Express AU manager is not seeing it. The installer is placing the entire SSL LMC-1 component folder in my component folder (library>audio>plugins>components). Logic's AU Manager is seeing nothing regardless of rescans. Thanks.

Can anyone tell me why I can't get this freebie to
work?
http://www.solid-state-logic.com/resources/lmc1plugin.
html
I'm trying to use the AU version on an Intel iMac, it
doesn't say anything about universal binary. My Logic
Express AU manager is not seeing it. The installer is
placing the entire SSL LMC-1 component folder in my
component folder (library>audio>plugins>components).
Logic's AU Manager is seeing nothing regardless of
rescans. Thanks.
I had this plugin. It is NOT Universal Binary, and as such is NOT compatibel with Intel machines.
Cheers
Egyptian Merchet and Groma Mac OS X (10.4.9) Black Coffee and a black Staffordshire Terrier

Can't get outlook express to work on networked Windows XP

Similar Messages

Maybe you are looking for