Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista.  It's all there. 
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

  • How can I get photoshop CS2 to work with Windows 8.1?

    how can I get photoshop CS2 to work with Windows 8.1?

    Have a look at
    http://forums.adobe.com/message/4976720
    Cheers
    John

  • Can't get Airport Express to work with Windows

    I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to get the Airport Express Assistant, but I can't find it. I got the Airport Admin Utility, and that installed fine on Windows Vista. Then I installed what I thought was the Express Assistant, and it just seemed to change the Airport software in the start menu, but I still don't have the Assistant, only the Admin Utility. Anyway, I open the Admin Utility and it opens the Base Station Chooser. There is nothing there, so I rescan, and it seems to do nothing. It doesn't find anything anyway.
    Where do I go from here? I am kind of stuck. I am trying this on a Windows Vista PC which is hardwired to a Linksys WRTSL54GS router. I have the airport express plugged in and the light is flashing Amber. I have a HP psc2410 plugged into the airport express that I would like to print wirelessly to.
    Thanks for any help.

    You don't necessarily need the AirPort Setup
    Assistant, you should be able to set up the AirPort
    Express Base Station (AX) with the AirPort Admin
    Utility...as it is a much more powerful tool. You
    need to make sure that you are using the version for Windows. At this
    time, the AirPort software is only supported for
    Windows 2000 or XP. A Vista-version has not been
    released.
    I suggest the following...
    - First, perform a "factory default" reset on the AX to get
    it back to it's original "out-of-the-box" state.
    - Next, temporarily connect your computer directly,
    using an Ethernet cable, to the Ethernet port on the
    AX during the set up phase.
    - Then set up the AX as a "wireless client."
    I have this same problem. I have a Vista Windows notebook and I am trying to get airport working to play music wirelessly through my home stereo. The "base station chooser" software does nothing on my Vista notebook.
    I used a friend's MacBook and was able to set up the airport as a client so I can see it listed in my Dlink router DHCP Client Table. The airport express box is plugged in, has a steady green light and everything looks good except there is no option to choose "computer" or "home stereo" speakers in my iTunes. i installed the airport express CD including the itunes it came with.
    Any ideas how to get this working on vista? Previously i had the newer version of iTunes 7.1 installed and the airport express CD told me it couldn't complete the install because a newer version of iTunes was installed. I uninstalled the iTunes and reinstalled the CD including the iTunes version 4.
    Help!
    Sony Vaio Windows Vista

  • Can't get quick time to work with windows thumbnail

    When I purchased a new camera, unlike my old camera that saved files as .avi and which allowed me to use the files with all software and which allowed me to view automatically the thumbnails for the .avi file, my new camera used the garbage .mov from apple. Result: i can't see what the files contains... NO thumbnails in windows! I was told to buy QUick time Pro to be apple to do this. I did what the quicktime "help" (misnomer) said to do: set poster frame, resave the file (try to save it as is, or as quick time mover). THIS DIDN'T WORKED. There was Ø supplementary information. The only thing that works is MANUALLY converting all my .mov from the camera to .avi using quicktime pro. I paid CAD$39 FOR absolutely NOTHING. Any suggestions?
    <Edited by Moderator>

    Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista.  It's all there. 
    After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Can't get email link to work with windows 2000 for craigslist, have made & verified changes suggested.

    I have done the Tools, application, email gmail setup for trying to get my email link to work. It still does not work. Have tried restarting & have verified gmail is selected for email. Used to work, quit working immediately after version 5 loaded.
    Have windows 2000.

    You need to remove your Mac's windowserver preference files.
    Do this by deleting the following items:
    /Library/Preferences/com.apple.windowserver.plist
    /Users/[username]/Library/Preferences/ByHost/com.apple.windowserver.[number].plist
    After you've done that, reset your PRAM — turn off your computer, press the Power key and then press and hold the Option + Command + P + R keys at the same time until you hear a second startup chime.
    After you've done that everything should be back to normal

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Can't get out.print to work with XML jsp tags

    <jsp:scriptlet>
    if(ErrorTrap == true) {
         out.println("<tr><td colspan=\"center\" align=\"center\">There was" an error while processing the form</td></tr>");
         ErrorTrap = false;
    </jsp:scriptlet>
    I can't get this script to work with the XML stype jsp tags. It keeps telling me the <jsp> tags are untermintaed. Is there a special trick to fix this or do I have to use the non-XML type tags?

    Sorry, I didn't mean to put the extra " in the out.println text string. :-/

  • How can I get elements 11 to work with 16 bits photos?

    In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

    No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
    Either way is expensive compared to photoshop elements.
    http://www.adobe.com/products/cs6.html?promoid=JOLIS

  • How can i get ical invitations to work with outlook users?

    how can i get ical invitations to work with outlook users?
    I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • How can I get Phillips Fidelio to work with ios7

    How can I get Phillips Fidelio to work with ios7. It worked with the previous operating system

    Not sure if this is the same problem others are having, but I used to play music on my Philips Fidelio by opening the Music app on my ipad and clicking on the box with the triangle (which has now disappeared in the new OS). However, if you have the philips dockstudio app, the box still appears there and I was able to get my speakers working again.

  • How can I get my iMac to work with scanners?

    How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • HT4623 iPad 3 how can l gets the SIM card works With iPad 3

    As all we know its christmas time l just received the gift for iPad 3 &amp; l notice that it need SIM card for me to use as the phone &amp; data,how can l gets the SIM card works With iPad 3

    Remember am in South Africa &amp; we got few carrier nets am in MTN provide &amp; I c my sim looks so big to fit on my iPad

  • Is there an adapter can i get so square will work with the otterbox i have on my iphone

    Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

    That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
    Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
    Give that a try. Claims to work perfectly for Square. NOT headphones.

  • I can't get airport extreme to work with iPad

    I can't get airport extreme to work with iPad

    Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
    In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
    Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

Maybe you are looking for