Can't get past  export eligibility with mozilla or netscape 7

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I've tried using both Netscape 7 and Mozilla 1.1 on NT 4.0 SP6a. With both browsers the same thing happens, I get to http://technet.oracle.com/software/htdocs/devlic.html?/software/products/oracle9i/htdocs/winsoft.html, I check all the Export Export Restrictions checkboxes and click the I Accept button and I get taken directly back to the same page. Latest time I tested this was 1:54 PM CST 11/4/2002.
I don't know if this is a known problem or not.

I can't download Oracle 9i Enterprise Edition for
Solaris 32 or 64 bit. After filling out the Export
form and accepting the OTN license terms, I briefly
see the download page but the browser immediately
returns to the Export eligibility form. I have tried
multiple times, with both netscape and IE - same
result. Could you please fix this. Thanks. I am having the same problem, using IE 6.0.2600 on Windows XP sp1. I get to the export agreement page, but even after clicking all the radio boxes I get the "Sorry" page when I click the "I Agree" button. No matter what I've tried, I can't get around this. I have my machine behind a home router (cable modem), but I had no problems with this same setup last fall when I downloaded 9i. I'm trying to download the developer suite, but I get this same error no matter what I try ot download. Any help would be appreciated.

Similar Messages

  • Can't get past gray screen with progress indicator... Help

    I can't turn on my Macbook. It starts but won't go past the gray screen with the progress indicator (spinning circle).
    I have tried:
    1. turning off, removing battery, holding start for 5+ seconds, replacing battery and then turning on.
    2. Holding command + option + R + P while staring up, waited for 3+ chimes.
    3. holding Shift down while starting up
    none of these things are working.
    I've been on hold with apple service/support for almost an hour now.
    I have an assignment on the computer that is due by midnight.
    HELP!
    I'm not very computer savvy and this is my first mac.
    Any ideas folks??
    Thanks.
    Macbook   Mac OS X (10.4.7)  

    You've done all the standard procedures. If you have any peripherals attached, disconnect them.
    This describes resetting the PMU:
    http://docs.info.apple.com/article.html?artnum=303319
    Did you have the AC disconnected when you did it? I don't have any other ideas.
    These are the startup key options:
    http://docs.info.apple.com/article.html?artnum=303124
    Edit: If you have the install disc stuck in it anyway, can you get the hardware test to work? (Reboot while pressing the D key.)

  • Can't get past gray screen with file icon on it

    When i turn on my computer the power light goes out but the gray screen stays on. After two or three minutes an icon of a file with a question mark appears. I cannot get past this screen. I have removed my battery and tried again. I have also tried the other processes for a computer that won't turn on. In my case the computer does turn on just never gets past this gray screen. Please someone help me

    The question mark on the file tells you that your MacBook wants to start up but can't find a viable OS to start from. Can you start up from the DVD that came with your Mac? If so, go to Disk Utility and see if you can repair the internal hard drive. If you can't see the hard drive from within DU, your drive may have failed, and you may need to replace it. Good luck.

  • Performed software update and now I can't get past a window with Itunes logo and usb picture?

    When I powered up the Ipad this morning, there was a software update notification.  After completing the update, the Ipad won't boot past a screen that has the Itunes logo and a USB cord just below it.  I've powered off and it still wont get past this screen.

    Thanks for the suggestion but unfortunately, it did not work.  Restore was unsuccessful and now I can't get iTunes to stay open long enough to attempt a second restore.   I've just posted a new question with more details of what I've tried. 

  • Can't get past set up with ios7

    I have an iphone 4 and just updated from ios 4.3 to ios7. it went through the full restore but the phone won't work. It's showing the Hello>slide to set up screen. then I choose wifi then I get to a restore screen. I've restored a few times now and it just doesn't get past this. It's not even working as a phone now and I'm really worried that I've lost all my contacts too. What am I doing wrong? What can I do to get it working?

    I went into the Apple store and the guy fixed it somehow using icloud (strange since I backed up to itunes not icloud) but I'm not complaining!

  • I keep getting error message saying application did not initialize and I can't get on the internet with mozilla at all

    when I click to open the internet through Mozilla Firefox, I get this message; "The application failed to initialize properly (0xc0000006). Click on OK to terminate the application."
    When I do this, I have to click on it twice before the box goes away. I still can't access the internet through Mozilla.

    Well, if they are private range IPs it does not make any difference. Everybody use them.
    Anyway hide any personal information.

  • Can't get past grey screen with apple spinning wheel, had a loading bar for a few seconds?

    HElp, can not open my Mac. Stuck on grey screen with apple and spinning wheel?
    PReviously opened fine but I could not remember my password try a number of passwords.  I now know my password but when I turned it off and back on got this screen?

    THe command R took me to a dark scree with Mac OS X Utilities with 4 choices
    REstore From Time Machine Back Up
    REinstall Mac OS X
    GEt Help Online
    DIsk Utility
    HElp

  • I tried to master reset my I pod touch, now all I have is a apple skull with a flame on its head I am trying to sync and I can not get past the apple with a flame

    I bought my daughter an I pod touch 3 gen. I tried to do a master reset so I could sync it with my Itunes account. After resetting, all that is showing is an apple that looks like a skull with a flame on top. Does anyone know what I am supposed to do so I can sync it?

    Master reset...? Your device was jailbroken prior to you purchasing the device. The only symbol you should see on reboot is an Apple symbol. Download redsnow... google it! Download the latest version and your IPSW (ipod restore firmware) it has to be the correct version. And the "just boot tethered" should fix your device.
    But that's only if you didnt back the device up. If you don't care about any of the data on the ipod then you can simply open itunes navigate to the device and click the restore button. This will restore the ipod firmware and install a fresh copy. Good luck let me know if you have any problems.

  • Can't get past language selection with Leopard Install disk

    My 1 year old Intel Mac Mini, which had been running 10.5.4 without problems suddenly froze up. The mouse was still active but I couldn't click anything. I turned the system off with the power button. When I restarted it got as far as the login screen, but clicking the user didn't do anything. I was able to log in using safe mode (hold down shift when starting). I ran the disc utility, repaired permissions and verified the disc. Seemed OK, but still the same behavior (freeze at login screen) when I try to boot normally.
    I tried booting from the Leopard install disk. When it reached the language selection page there were some strange-looking horizontal lines in the display. Clicking the "proceed" button caused a copy of the button's graphic to appear at the top of the page and nothing else happened. Very puzzling, since I had upgraded OS X using that same disc.
    I have a Superduper backup from a couple of weeks ago. It won't boot up normally either. Any ideas? Unfortunately, I'm 2 weeks out of warranty!
    Thanks,
    jwstex

    I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
    Make sure no external drives or other unnecessary connections.
    If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
    http://support.apple.com/kb/HT1379

  • How can I get past the problem with the Illustrator trial download?

    I have tried to download the free trial multiple times and it always just freezes.  Anybody else having that problem?  Any solutions?

    mom,
    Have you installed the Creative Cloud management (in the list of apps on the cloud download page, find the adobe manager. That must be downloaded and installed first. Most browsers will jump to that install when you select one of the other apps first. But some browsers are having a problem doing so. Once the manager is installed and running, you can find illustrator listed in the manager. Click the install link next to the Illustrators name. That will download and install illustrator for you)?
    Beyond that, this may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    Creative Cloud membership support

  • I have a white screen with the apple logo  upon startup. Then the wheel turns and the screen is white.  Can't get past it.

    I have a white screen with the apple logo  upon startup. Then the wheel turns and the screen is white.  Can't get past it.

    Boot with your install disc, launch Disk Utility, and repair the boot volume.

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated.  And can't used the app card number.  Any advice???

    I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated.  And can't used the app card number.  Any advice???

    I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
    Apple is becoming more like Microsoft every day.

  • Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?

    purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions  to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?
    My machine was patched to date 10.x.x.  I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded.  What if that doesn't work?
    Any thougths would be appreciated.
    Joe

    And you have a workstation? not a notebook. 
    Usually a driver or hardware, nothing that Disk utility will fix.
    You know of course what a Prohititory Sign is?
    prohibitory sign, kernel panic
    Forum devoted to Lion:
    Mac OS X v10.7 Lion Communities
    Tips and FAQs
    FAQ kernelpanic
    Resolving Kernel Panics
    Avoiding eliminating Kernel panics
    Lion App Compatibility Table - RoaringApps
    RoaringApps Mac OS X Lion Application Compatibility
    did you make sure your apps, drivers, and hardware support Lion?

  • I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Maybe you are looking for

  • Mm invoice line item tax

    Hi all. i am developing purshase tax register. i have taken all data from tables EKPO, EKKO, RKBP, BKPF, BSET. I am getting all data also, but i am unable to find the itemwise tax breakup. i.e. i have all data in internal table but how can i find tha

  • How to set user name, password and other proxy settings?

    I use a Proxy connection: I have to set server and port, and user and password. With the browser: when I run firefox/safari I type user and password (server and port are given in internet option control panel) With skype (for example): I can type eve

  • Business Object Question

    Hi, can we get more than one records from the object depending up on Key Fields Regards, Soni

  • Security questions problem

    hello, I forgot my security answers in app store and they sent E-mail to reset question, but i didn't receive any E-mail form them. Please can anybody help me to reset my security answers ..? Thank you..

  • Problems using 488.2 commands with Agilent 82357 interface

    Hi, I need to send a large file to an instrument in chunks using the 488.2 commands sendsetup and senddatabytes. When I try to use these commands I just get an error saying 'NI-488: Error connecting to driver or device'. The interface works fine usin