Can't get past Loading Editor

When I attempt to load a script, it never completes the loading process. I can see the outline in the background, but the pages never appear. The mouse remains a clock icon. When I attempt to load from a browser, it never gets past the "loading editor, please wait" window.
I have tried both mac and pc; the application as well as firefox, chrome, and ie. It is the same for each.

Please share either your document or project at [email protected] as co-author. We'll investigate the issue and will try to fix it asap.
Thanks
Adobe Story team

Similar Messages

Can't get past load screen

I've used Premiere Element 7.0 a lot. It had been a couple months but when I went to open it the other day it wouldn't get past the "load screen," or whatever you call it, the small box that appears right at startup that has all the program authors listed. That box appears for a brief second and then goes away.
Never had any problems before. Already tried re-installing the software. Someone mentioned quicktime for a probably related to running premiere and tried updating Quictime as well.
I don't think it has anything to do with my system. Everything should be fast and big enough. I'm not sure everything that you would need to know, but I'll just list what I see: I have Windows Vista 64 bit. 4 gb ram. Intel Core2 Duo T7250 @ 2ghz
thanks,
Jonathan

>Windows Vista 64 bit
Not actually supported, so PE is running in 32bit compatibility mode... so... exactly what are your program settings?
This is aimed a Premiere Pro, but may help
First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

When I try to open IBooks it just cannot get past 'loading' ?

WhenI try to open IBooks I can't get past ' loading' ?

Hey Stuart800M,
Thanks for the question. I understand that you are experiencing issues opening an application on your iPad. Let’s see if we can isolate this issue further. First, try closing the iBooks application:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
Next, go ahead and restart your device and test once more:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a restart, let’s see if we can isolate further by backing up and restoring your device as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

HT1349 Successfully loaded ios7 to iphone 4S from iTunes...now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree." Goes in a loop and can't get past this screen. Pls help. thanks.

successfully loaded ios7 to iphone 4s.
now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree."
goes in a loop and can't get past this screen. Pls help. thanks.

Have you tried resetting the device?
Hold down the home and lock buttons until you see an Apple Logo, then release the buttons.
If that doesn't work, you should check to see if you have a backup because you may have to restore your device.

Can't get past white loading a screen after restoring from time machine backup

I am aware there are others threads of my problem however they date back years ago and after trying their solutions it still does not work.
After using Time Machine to restore my hard drive from a backup, I can't get past the white loading screen with apple logo after system restart during restore process. Ive gone into disk utility and repaired hard drive - it's fine. So I know this is a software glitch. I've also tried resetting SMC & PRAM (whatever those mean). No success and i cannot get past the white loading screen.
I'm running Mavericks (latest) on a late 2009 iMac. Thank you!

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I ttunes wants to keep on restoring my phone and I restored a few time now but can not get past the restore screen to load my purchaseed apps etc or sync my phone with new data, it sort of does not recognise the fact that i ihave synced already. Please he

I Tunes wants to conituiosly restore my phone and after every restore it just goes back to the restore screen and i can not get past that to get to my apps etc. It is as if the system does noet regognise the fact that the resotre has been done.................

Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Can not get past program load-up

The program was working fine however recently I can not move past loading up the program. I access aperture and the program comes up however then I go in to a in-definate loadup and cannot move forward.
This all happened after I deleted a project and then tried to move it back from my trash. The folder name was created however it never loaded completely and told me to re-boot system.
After re-boot, this is the current situation.
Any ideas are welcome.
Thank you - Tony

Hi Tony,
My guess is that putting the trashed project back has caused the problems; you can't just move them in and out of the Aperture library and expect things to be peachy. In Finder, right click the icon for the Aperture library and choose "Show package contents", and then drill down until you see all the project folders. Delete the problem project from the Aperture library, then take all the image from the trash and reimport them into a new project.
Alternatively, restore your Aperture library using Time Machine from the point just before you deleted the project accidentally.

Can't get past the licensing screen in Premier Element 10. I've had the program for 2 years with no problems at all. Suddenly the licensing window shows up and won't go away. AMD processor - ASUS MOBO - Win 7x64

Out of the clear blue - the Premier Elements Organize "Licensing Agreement" shows up on my screen. I click "Accept" - it goes away - and within 5 seconds pops up again. I can't get past it. I've used the program successfully for over 2 years. Anybody else having this problem? I use Win 7 x64, I have TONS of disk space (read over 570 GB free on "C Drive"). I have 12GB of DDR3 Memory. I'm using an AMD 6 Core processor with an ASUS mobo. All other programs work fine including several other Adobe programs.

jazztrptman3
Thanks for the follow up. Sorry the news is not better.
Have you done a Tools/Error Checking for the Local Disk C?
Then, maybe
In your uninstall/reinstall troubleshooting, have you
a. uninstalled using the usual Control Panel route
b. did a ccleaner run through with its regular and registry cleaning parts
CCleaner - PC Optimization and Cleaning - Free Download
c. reinstall with antivirus and firewalls Off.
I have been doing some searches....any chance you have a RAID configuration change in your computer environment?
Can you right clicked the program desktop icon and select Run As Administrator? If so, please do so. Are you still running the program from a User Account with Administrative Privileges?
You might want to take a look at some of my encounters with activating Premiere Elements and see if there is anything in that which applies to your situation.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Is your input that you can get paid technical advice from Adobe Tech? I am not sure if it offers (even for a fee) troubleshooting for earlier versions.
Please update us on your progress when you get a chance.
Thanks.
ATR

Can't get past login: Computer freezes! Help

I can't get past the login and my computer completely freezes. I can't even check disks, or load the Tiger DVD to do a test. Any suggestions? I am completely stuck.
Thanks

Hold down the shift key at start up to boot in Safe Mode.
or
Hold down the Alt key on start up with the Tiger disk inserted should allow you to choose which volume to boot from.
or
Hold down Command(apple)> S at boot into single user mode. At the prompt type fsck -y (space betwixt the k and the y). Let it check the disk. Run it again until it tells you your disk is OK. Then type reboot at the prompt.
A little more information about what the Mac is doing when it 'freezes' might also prove useful for the good people of the forum. Is it the spinny beach ball of doom, or some other symptom?

Another can't get past 240htt post (k8n neo2)

3500+
k8n neo2 plat (1.1)
adata pc4000 (ddr500)
Fortron 400w psu
With HT at x4, i can't get past 240 when my ram is rated at 250mhz on loosest timings and 1t and dual channel. Doesn't matter whether i'm trying to max my cpu and using divider on ram, or lowering cpu multiplier and maxing ram, both max at 240mhz.
my cpu is watercooled with 1.7v goign to it, and 2.85 volts to the ram. I measured the +12v rail during Prime 95 in Priority 10 mode and it was 11.74-11.75, so psu isn't the problem right?
I first had my agp thing set to 67mhz, and i would get disk write errors and failure to load OS errors during boot up. When i try 68, after sitting at welcome screen for a few minutes, it loads to windows and immediately freezes.
Any ideas?

see here
AMD64 3500+ & MSI K8N NEO2 SATA Oddity
i have the same problem with activated sata controller
htt is max. 230 htt 4x
i hope msi can fix it!!!!!!!!!!!
DOT sergant or so doesn´t function.

Updated to FCPX 10.2, can't get past splash screen

So, I got through a batch of projects, and finally upgraded to FCP 10.2
After installation, I can't get past the splash screen. I'm asked, via a dialogue box, if I wish to update my libraries / events. I do.
Then... I see rapid fire text loading and then updating libraries / events. Then it gets stuck on a particular event... beach ball... nothing.
I've tried several times, and it gets stuck on a random event.
I can't get past the splash screen. I've rebooted. Still nothing.

Generally, if FCP opens under one account but not another, the issue is a corrupt preference in the non-functioning users account.
While in your user account, download and intall FCP Rescue (google it to find it), open it up (with FCP not running) and TRASH your preferences.
Try FCP again.
x

Dreamweaver Mobile Applications: Can't get past "Cloning seed app for Android" window

I'm trying to do a basic Android app using Dreamweaver. I went to Site-->Mobile Applications-->Build and Emulate-->Android. When I do this a window pops up that says Cloning seed app for Android. Unfortunately, I can't get past this. The window continues to act like it is loading, but then it never loads anything. You're supposed to configure the application framework which I did. It's funny because there is an "Easy Install" button. Of course, it doesn't work which means you have to manually try to download and set everything up which is a nightmare that lasts for days. Easy Install button? It's more like a screw you button. All of the tutorials are predicated on the easy install button actually working. Anyways, I downloaded the Java Development Kit (JDK) and the Android software development kit (SDK). Then I got my AVD (Android virtual device) up and running. Then I set up a site and made sure the file was saved as index.html. I also made sure I put in information in application settings. I tried calling Adobe tech support and doing extensive Google research. Adobe told me it wasn't their problem that the "Easy Install" button isn't working. Plus, troubleshooting information on Google for Dreamweaver mobile app development is scarce. It would be great to start developing instead of hassling with the setup. I'm a week into it and I still can't get it to work. I'm using CS5.5 Design Premium.
Lastly, I've done all the updates for dreamweaver that I can do. The only thing I can think of is maybe to try putting the SDK and JDK in the same folder, if that is even possible? Also, I'm using JDK6. Maybe the Android SDK will only run with JDK7? Either way I'm stumped. Any suggestions or help will be appreciated. Thanks.

I've got the same issue.... in visual studio, you set the properties of the object to something like, content and it builds it with the binary.. but flash builder, i'm stumped on how to get the release build wizard to recoginize the additions i've selected in the project properties -> build packaging -> package contents section... :/

Can't get past login screen following software update

I've been using Leopard on my Mini for months quite happily and when last night the Apple software update window popped up I let it install as I have always done without a problem.
My machine re-booted, went through installing the two updates and when it had finished re-booted again. Problem is I can't get past the login screen, the process goes like this...
Switch on --> Grey screen with apple logo and swirly --> Wallpaper appears --> login window --> enter password --> login window says 'logging in' and dissapears --> Blue screen appears --> login window appears again.
I've tried a safe-mode boot (hold down shift at boot) - no difference. I've tried single user mode (cmd + S) - no difference. I've even tried booting from the leopard install DVD (hold down C at boot) but my mac just ignores all this and goes through the process outlined above.
Any ideas?
Thanks

Are you using a wireless keyboard? Those commands may not work if the operating system loads before the keyboard driver.
If you have a wired keyboard, try holding down the option key at startup to show all the bootable drives, including the install disk. Then after booting from the install disk use Disk Utilities from the Utilities menu to do a Repair Disk and Repair Permissions.
If you can boot into Safe-Mode, 10.5.6 is supposed to clear up some known issues after a reboot. See this MacWorld article:
http://www.macworld.com/article/137764/2008/12/osx1056_bugsandfixes.html?lsrc=mw week

Can't get past blue screen

I tried to reinstall Photoshop Elements from a disk and upon restarting to finish the install, I can't get past the blue screen after the grey Apple screen. I've tried booting into Safe mode and can get to the login screen, but when I log in, it accepts my password, starts the login process, but then loops back around to the login screen. Any ideas how I can get past the blue screen and some place where I can clean the offending application off my hard drive and reinstall the OS?

Incidentally, how much free space was on the hard drive? I am wondering if there's some kind of insufficient space issue here, especially after installing a large program.
Adobe has this [troubleshooting information|http://64.233.167.104/search?q=cache:qzZBfqgebGUJ:kb.adobe.com/self service/viewContent.do%3FexternalId%3D332811%22Photoshop+Elements%22+osx+systemfreeze&hl=en&ct=clnk&cd=2&gl=us&client=firefox-a] on their website. (I had to provide a Google cache link because when I tried to load the page using both Safari and Firefox it gave a blank page.) What version of elements are you using? I notice you said you were "reinstalling" elements, and the help page specifically mentions doing that. Not that any of this seems to indicate why your computer isn't starting except that maybe the Elements installer damaged something in your OS while installing. At this stage you may need to try to repair the directory using Diskwarrior or consider reintalling your OS (yes, I know, flaky disk, but...).
Message was edited by: Limnos

Can't get past Loading Editor

Similar Messages

Maybe you are looking for