Can't get past OCX error when installing ODAC 11g on Windows Server 2003
I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC
Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian
Similar Messages
-
About memory issue during installing Oracle 11g on Windows Server 2003
Hi, all
When I installed Oracle 11g on Windows Server 2003 which the server is a virtual server, Oracle only can detect 2G memory.
But there are 4G memory with my server.
I want to know if the Oracle 11g's new feature or the virtual server lead the issue.
Also , I want to get your help to resolve the issue, thanks a lot.Let me get this straight:
You have created some virtual machine using someone's unknown VM software.
You have installed Windows Server 2003 (perhaps, but not confirmed 32-bit) to that VM.
You have allocated 4GB of memory to the VM (we guess ... not sure I'm ready to take your word on this)
You are attempting to install Oracle 11g (presumably 11gR1 32 bit for Windows) in the VM
And the Oracle (installer?) seems to be reporting that you only have 2GB RAM.
Since I personally have installed Oracle 11g 32bit for Windows on Windows 2003 server with 4GB RAM and had no issues, I would be investigating the (unknown) VM environment. -
JRE Error : while Install oracle 10gR2 on Windows Server 2003
Hello,
I am trying to install a Oracle 10gR2 on windows server 2003.
I have unziped the files and when I run the oui.exe it gives the below error:
cannot find any matches for wildcard specification "../stage/components/oracle.swd.jre/1.5.0.0./1/DataFiles/*.jar
Error : JRE missing in Scratch Path
I tried changing the oraparmaini file but it did not allow to make any changes.
Not sure if its looking for any particular java files.
What should i edit ,to specify the java location.
ThanksWhat exactly did you unzip? This error occurs if there are several zip-files extracted to different target locations. But - if I remember correctly - 10gR2 database is only one zip-file, so you should not face this issue. JRE for OUI is part of the downloaded software,so you don't need to specify a location for JRE, OUI knows where to find this.
Werner -
How can I get past the error messages that keep popping up every time I try to download anything?
Hi
Could you please let us know more about the error messages that you got?
The following page has information on the error messages: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html
Thanks,
Sunil -
iPad can't get past step 8 when syncing. I have to unplug before the end. Is this normal? What do I do to solve the issue? Thanks. JD
It is syncing through everything and then failing to close out. If I disconnect then the libraries are all there although I have lost a movie and a few tracks downloaded as a result of this.
JD -
I can't get past white screen when starting up, any ideas?
I Can't get past white screen when starting up, any ideas
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums -
HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc
getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc
There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before. -
Can't install DPM agent for Windows Server 2003
Hi,
We have DPM 2012 backup server.i try to install DPM Agent on Windows server 2003 PC. but installation failed.below error are Occured.
Install protection agent on (serverName.domain name) failed:
Error 347: An error occurred when the agent operation attempted to create the DPM Agent Coordinator service on (serverName.domain name).
Error details: %1 is not a valid Win32 application
Recommended action: Verify that the Agent Coordinator service on(serverName.domain name) is responding, if it is present. Review the error details, take the appropriate action, and then retry the agent operation.
HOW CAN SORTED OUT FOLLOWING ISSURE
Thanks,
GayanHi,
The below blog outlines the needed steps for protecting
Windows Server 2003 computers using Data Protection Manager 2012 R2.
http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
Problem when install ODAC 11g " Updating registry key "
Hi every one,
I have O/S Windows XP with service Pack 3 , and i install Oracle DataBase 10g Release 1 , and install Microsoft Visula Studio 2005.
The problem is :
When install ODAC 11g v.11.1.0.6.21 and the install reach ( progress ) to 60% i see a message _" The specified Home Nam e was not found in the registry "_ , with two option :
* Stop installation of all product.
* Stop installation of this component only.
By the way,the installation process stop when it is : Copying files for ' Oracle Services For Microsoft transaction Server '
Can any one tell me what is the problem ?
with regards
NaifWell, the MTS services that is part of ODAC 11g is for Oracle DB 11g. So if you are using Oracle Database 10g, you cannot install that. Just check off the components you need to install and leave the others unchecked.
-
Problems installing OBIEE 11g on Windows Server 2008 64 bit
Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
ScottJust to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott -
Error running universall installer using Oracle 11g on Windows server 2003
Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
AntHi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios -
Cannot Install Portal 10g on Windows Server 2003
Downloaded Portal 10G from downloads server (as_windows_x86_portal_wireless_101200) to a new Windows 2003 Server. Attempt to install, get the series of messages "checking prerequisites" ending with "All installer requirements met."
At that point the DOS window disappears, and nothing else visible happens. The "checking prerequisites" messages are also written to a log file in
c:\program files\oracle\inventory\logs
which contains no other information after the message "All installer requirements met."
However, in the server's event log I get two entries:
First...
Application Error:
Faulting application setup.exe, version 0.0.0.0,
faulting module unknown, version 0.0.0.0,
fault address 0x00000000.Followed by...
DrWatson:
The application, C:\Documents and Settings\All
Users\Documents\Downloads\
as_windows_x86_portal_wireless_101200\
Disk1\setup.exe, generated an application error
The error occurred on 03/23/2005 @ 13:09:23.531
The exception generated was c0000005 at address
0020224D (<nosymbols>)After I repeat these steps several times I still get the "Application Error" log entry, but the "DrWatson" error is replaced by a simpler message
Application Error:
Fault bucket 00134882.I noticed another recent entry in the forum that describes a similar problem -- I entered this one to insure that you had as much information as necessary to diagnose the problem. If there's any other information you would like please let me know.
Thanks in advance!mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT) -
How to install rootsupd.exe on windows server 2003?
hello
i need to update the root certificates. but i can't use "rootsupd.exe", it's only for windows xp...
there doesn't seems to be a similar update for windows server 2003, correct?
how can i solve my problem, do i need to install the certificates manually? if yes, how does this work?
thank you very much!
best regards, jan
regards, jan"when ich click on "rootsupd.exe" in my windows server 2003 web edition virtual machine (virtualbox), nothing happens - i can't see any actions after clicking that file... and i don't think that behavior is usual...?"
same behavior on windows 7 (x64) workstation - nothing happens after clicking.
maybe i need to extract it, and install the files manually?:
- authroots.sst
- delroots.sst
- roots.sst
- updroots.sst
regards, jan -
Install Oracle 10g on Windows Server 2003 Enterprise Edition
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT) -
Is it Posssible to install 10g &11g in same server(2003)?
Hi frnds,
Already we are having 10g database in Windows server 2003 Environment .It is running properly.
Is it possible to install 11g server in the same server.
~will it be a problem?
~will it disturb the 10g ?
~ otherwise any configuration we need to change.
Regards,
MuthuEach Oracle install is self-contained. Oracle does this by using a top level directory (fiolder) for each install known as the ORACLE_HOME. Each Oracle Home includes all the required software so the various versions do not conflict.
The major issue is to make sure the version you are installing is indeed certified on that operating system. (see http://tahiti.oracle.com, go to the version you want, and look for the Install guide on your OS family) If it is not listed in the install documentation, you will probably have either challenges or complete failure.
But for the database, co-existance is not (generally) a problem.
You should, however, use only one listener for the entire machine, and that listener should be the one at the highest version. The easy way of handling this is to turn off the older database AND listener (control panel) while installing the newer version.
Maybe you are looking for
-
Error in workflow while linking goods receipt document with parked invoice
Hi All, I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item sayin
-
Im not quite sure how I got into this situation but I have fried my Iphone app photo and video library. This demonstrates itself in 2 ways 1. The above error message when I attempt to play videos older than a certain date. 2. Photos older than a cer
-
Where is the file "sun-resources.xml"?
I tried out this example once, http://www.netbeans.org/kb/60/javaee/ejb30.html Then I removed this project from Netbeans. Today when I want to play with this example again, I found there is already an existing "Server Destinations" when I want to cre
-
HT201415 How do I make my iPad 3G if it is not a 3G ipad?
Having bought iPad realised I should have got one with 3G . Any way I can adapt it.
-
Hi! How to open .bin files?? in OS X Mavericks
Hi! How to open .bin files?? in OS X Mavericks