Can't get past the white screen with the grey apple in the middle

When I start up my PowerBook G4 I first get a gray screen with a small white box in the middle of the screen that contains planet earth. After this icon has flashed 14 times it disappears and then a small file appears in its place. Inside this file folder is an alternating flashing question mark and the Finder icon. After a few seconds this icon disappears and the screen turns white with an apple in the middle. I can not get the computer to do anything after that.
My problem is I got the computer from my mother and she can not find any of the disks that originally came with it.
Does anyone have any useful suggestions?
Thanks

Unfortunately, I just got off the phone with Apple Care and they do not carry them anymore. They're recommending I upgrade the system to Leopard. They want $120 for the disks. Any other suggestions?

Similar Messages

My iMac won't boot up past the white screen with a grey apple and spinning icon

My iMac won't boot up past the white screen with a grey apple and spinning icon...please help!

command R did not result in anything different - still the white screen, etc. I do you Time Machine with and external hard drive, but I unplugged that. I have the installation DVD, but it doesn't seem to be reading it either.

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

HT1758 Power failure in the middle of a software update and not the computer will not boot up. The computer just has a white screen with a grey apple and just loads non stop.

My iMac will not boot up after a software update. the screen is all whute will show a grey apple in the middle and will look like it is working but nothing happens; this can go on forever.
Does anyone have any suggestions?

Do you have a backup in the form of a bootable clone or Time Machine? Restore that and then try the update again.
Some things to try here (Safe Boot)
http://support.apple.com/kb/TS2570
Another option might be to download the standalone from Apple Downloads on another Mac and try installing it in Firewire Target Disk Mode to the Mac that was interrupted during the update.
http://support.apple.com/kb/HT1661

Uh-oh, crash! can't get past blank white screen...

My iTunes gave me trouble today, after trying to open, it gave me the infinite spinning wheel. I shut all other apps down, then tried to force quit iTunes. That froze the whole thing, so I had to press the power button to shut down and then restart (or so I thought), but instead of restarting, I now have just a blank white screen. Horrible. What can I do?
Thank you for any help!
Jen

Nevermind, it awoke from it's coma!! I wonder why it did that though....

Reset my laptop now I can't get past this black screen with text?

I tweeted toshiba telling them my problem on Twitter (about how it would let me log in but it wouldn't take me to the desktop, it would just keep loading for hours til I would turn the computer on again to try and use my laptop) then direct messaged the @toshibausahelp and asked them if I should just reset my laptop and asked if it would then work. The person messaged me back and told me to reset my computer so by pressing f8 at the toshiba logo at the start up it took me to the options to reset my laptop. Then it took like 2 hours to reset and then my screen literally says "reboot and select proper boot device or insert boot media in selected boot device and press a key" idk what to do? That's the only place it'll take me to, any key I press won't effect it. Everything is gone which I knew it would be, but I thought resetting it would give me a fresh start to try again. But I can't even try, it won't let me go anywhere else can someone help me. I got this laptop in June and it's had so many problems. It's a satellite c55-b5202
Attachments:
image.jpg ‏2048 KB

Aftre the reset you need to configure correctly your router. Using Cisco Connect is the more easy way because it try automatically to sense the type of connection without asking to the user/operator. If you don't have Cisco Connect you have to configure manually using the web interface (http://192.168.1.1) but you need to know the right parameters for your ISP (and they depends only from your ISP, not from the router). You can try also to ark the customer support for your ISP or find another user with same provider and use similar parameters.
You can also try to re-download Cisco Connect software from here:
http://downloads.linksysbycisco.com/downloads/utility/1224662063213/CiscoConnect.E2000.1.3.11006.1.e...
Of course you can connect your computer directly to modem for the download, then reconnect router between you and your modem. Better to connect router to you computer with cable, not wireless for first configuration.
Ciao
Roberto

IMac will not get past chime & white screen

iMac will not get past chime & white screen. I have tried all the start up key combinations I can think of (d or c etc) with a start up disc, but no joy. The disc drives seems ok - you can hear it working & it will eject OK.
Any other start up ideas, please?

Have you tried a safe boot? If not, hears how (it's straight from Mac Help):
To start up into Safe Mode (to "Safe Boot"), do this:
Be sure the computer is shut down.
Press the power button.
Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.
To learn more about Safe Boot check this page:
http://docs.info.apple.com/article.html?artnum=107392
Intel iMac (Early 2006) Mac OS X (10.4.8) 2.0 Ghz, 1 MB

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache

I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

Look at this support article:
http://support.apple.com/kb/ts2570
Ciao.

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?

After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened

-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working.

My imac wont get past the white screen with logo and rotating wheel

i was trying to turn on my imac when suddenly ot took forever on the white screen
i tried taking off everything connected to it-no change
i tried a safe mode after a few minuted a heard the second chime then a blinkin
question mark folder showed up so i turned it off again and tried a nvram/pram reset but it still stuck on the white screen
is it time to visit the apple store or is there something else i should try?

A flashing question mark or globe appears when you start your Mac
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advance

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

Can't get past the white screen with the grey apple in the middle

Similar Messages

Maybe you are looking for