Can't get pencil tool into merge drawing mode

I have downloaded the trial version of Adobe Executive Suite CS5. In the Flash Professional CS5 program I am trying to do a drawing with the pencil tool. In the old version of Flash that I have (4.0) if I draw two lines that overlap, I can delete the line past the point where they cross. In this version I can't do that. It treats each line I draw as a separate item and won't combine them. I notice the properties panel says I am in Object mode which would be the reason. However I can't get it to go to merge mode, which is supposed to be the default.
Is this because it's the trial version and not all features work in that version? Or could there be some other reason?
Thanks for any help anyone can offer. My email address is [email protected] and I can be phoned at 541 782-5904 (Oregon).
Ron Coleman

Thank you. I tried what you said and the button simply didn't respond. However I was using the line tool or the pencil tool when I did this. I later tried using the rectangle tool and then it worked. Once I got it switched back it stayed that way. I appreciate your emailing me, it's so hard to get answers to problems with Adobe. I had the old Flash program by Macromedia and I honestly believe it is easier to use than the new one. But maybe that won't be so once I've spent more time with it.
Thanks again.
Ron Coleman

Similar Messages

My current project in the events library has gone into list mode. ie a single clip on the left, one above another, so showing only about 7 clips. how can I get it back into normal horizontal mode

My current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?

That's about what it's supposed to look.
How do You want it to look ?
a. You can change places by using this
b. May be You changed this top right symbol of an hard disk ?
c. or changed the number of frames to be viewed ?
d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
Yours Bengt W

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited in iPhoto first and sent to PE13 for adjustments, it can be sent back to iPhoto library. Ideas?

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited first in iPhoto, and sent to PE13 for adjustments,
I can get it back into my iPhoto library. Ideas?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

Build event announced that you can convert your android app to windows platform ! How can I get the tools to do it?

From the build event I heard that you will be able to convert Android and iOS application to windows 10 phone platform! How can I do that ? Where can I get the tools ?

Here you go!
Universal Windows Platform Bridge for the Android Runtime:
http://aka.ms/projectastoria
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

TS4036 I have a Macbook pro and I'm trying to set up my ICloud on it, and when I go to Preferences, there is NO ICloud there. How can I get ICloud back into "my preferences" to set it up?

I have a MacBook Pro, its 1 year old. I'm trying to set up my ICloud on it, and when I go to "preferences", (it says to go to "Preferences" in the instructions,) and then "click" on "ICloud", but my ICloud is not there. How can I get "ICloud back into "my preferences".

Welcome to the Apple Community.
This suggests you don't have the right operating system. OS X 10.7.2 or better is required for iCloud, which operating system do you have.

I can't get my pictures into the public folder on the iPad 3. Can anyone walk me through the steps?

I can't get my pictures into the public folder on the iPad 3. Can someone walk me through the steps?

Ok, I'll give it a try.
Presuming you already have a Dropbox account, and you have the app on your pad.
Open the app, navigate to public folder. Touch the upload icon at the bottom. It will show you everything you have already uploaded. To upload a new picture, then touch the plus sign at the top right. You can create one or more subfolders to organize it however you want.
Hit the plus sign again if needed, and the photo listing will show up. Find the photos you want and mark them by touching them. Then touch the blue word upload in the upper right.
( the directions assume the pad is in the landscape mode.)
That's really all there is to it. As I typed this I opened and uploaded a couple of pics to get the steps right.

How can I get my iPhone out of landscape mode and back to portrait?

How can I get my iPhone out of landscape mode and back to portrait? Tilting the phone doesn't work.

Try following - 1 by 1:-
* make sure portrait lock is not on & try turning on/off several times
* turn off mobile and turned it back on
* hard reset by pressing lock and home at same time
If problem persist, you need to try following but be careful since the following impact your iphone.
* resetting all setting: this will reset all settings of your iphone back to factory setting
* resetting all setting by erasing all data: this will reset all setting and erase all data so do back-up and proper syncing and read relevant details
* restoring from itunes: this will also erase all data and take mobile back to day 1
last 3 options are last resort and only be done if you are sure you can restore your data.
Please don't hold me responsible for any data loss while doing last 3 options
Cheers!

HT4085 I just updated my ipad and now I can't get my kindle books in landscape mode. I have th elock roatation off everythign else goes to landscape

I just updated my ipad and now I can't get my kindle books in landscape mode. I have th elock roatation off everythign else goes to landscape

iPhone, iPad or iPod screen will not rotate, fix
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
iOS Screen Does Not Rotate
http://support.apple.com/kb/ts3805
 Cheers, Tom

I can't get my tool bar to get the return arrow or the forward arrow so i can browse. i have to quit the browser and start all over again everytime i go to another site and want to return. not on tool bar and get it on.

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/787149]''
second time i have had to go through this, so here goes, i can't get the return or forward buttons on the tool bar and can't return to the website i am in have to quit the web site altogether and restart the firefox after viewing any site, as i have no return arrows or forward buttons on the toolbar.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

I have student CS3, can't get reshape tool to work as it says it will

I select the points and/or segments with reshape tool, but when I click and drag it moves the entire path and not just the points I highlighted with the reshape tool. Same with the white selection arrow = always moves the entire collection of paths because I can't get it to select just a portion. Is there something I'm doing wrong? I follow the directions exactly but there are several things that don't operate as described in manual. Another example is the saved workspace. It never brings back the color swatches I save onto my workspace - they're lost every time I close a file even though I save it per instructions. Is this because it's a student version or is it user error?

Yes
On a closed path select the white arrow and click on the path not inside the path but on the path itself.
That selects just that segment then you can reshape at will and when you go to another segment it will allow you to reshape that as well without reselecting the path.
Again do not drag the white arrow or click within the path just click on a segment.
If you draw the closed path with a shape tool then it is all selected so you have to delectit then select it withthe direct select tool clicking on the path segment.

How can I get an mp3 into the music section on iPad without using a computer?

The situation is this: I have no access to a computer. The iPad is all that I have to use. So I have never synced it to iTunes or anything.
I am trying to make a video using the movie making app Pinnacle Studio (iMovie doesn't do enough for what I want) and when it comes to choosing audio files, it shows what's stored in the music library of my iPad.
But here is the problem. The audio is a track I have sent to my own email address as mp3. I want to be able to save it from email into my music folder so that it can then be imported into Pinnacle Studio. But when I click on the mp3 in the email it gives me only options to open it in iMovie or Dropbox. How can I get to use this piece of audio when I can't access a computer? Thanks a lot for any help.

If you don't have iTunes you will need to buy the song from the iTunes store and download it that way. If it is a custom track you may be out of luck. The only way to get a song on your device without iTunes involves jailbreaking it.
iOS is set up to prevent people from emailing each other songs, videos, movies, books, etc. This is how Apple got their contracts with the content providers by promising that they would do what ever it takes to prevent people from sharing content that they didn't pay for.

I moved the project files and now I can't get them back into iMovie 11

I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
Someone please tell me there's a way to get the project files open again. Thanks

enoughsaid3 wrote:
... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
• on your Mac, Apps/Utilities you'll find Disk 'Utility'
• on the left lane, you'll notice your connected hard drive(s)
• select it, click on the 'erase' tab
• NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
that's why you should do it as step#1 after purchasing a new drive
done ...-

I have V1 video app on my iPhone and on my iPad but can't get the videos to merge when backed up to the icloud.

My V1 video app is use on my iPhone and iPad but I can not get them to merge when I back up to the iCloud. I want to be able to take the video of a swing with the iPhone and play it back on the iPad. What am I missing?

do u have your ipad doing airplay because that could happen

Can't get pencil tool into merge drawing mode

Similar Messages

Maybe you are looking for