Can't get Pics To Stay The same size. cropping.

So I Goes To Use The imovie And Then I imports This Picture 'cause I'm a Picture kinda guy And it's All Goin' fine And Then I Get This Picture on my Screen And It's All zooming in But worst of All it gets cropped.
It's Going fine, Then At A certain point while It's Loading it just Becomes smaller. = ( Help. Plz.
Nothing I Do in Preferences helps And I would Like less zooming Too.

I'm not sure how you would expect a zoom-in to happen without cropping. See if the iMovie Help topic "Removing motion from a photo" will answer some of your questions.

Similar Messages

  • I have the original iPad and when I sync it with my macbook pro in iPhoto the faces are different on both, how can I get them to be the same as on the computer

    I have the original iPad and when I sync it with my macbook pro in iPhoto the faces key photo aren't the same on both devices, how can I get them to be the same as on the computer

    Interesting observation.  Thanks for sharing.
    Did you have a technical support question?

  • I use 2 to 3 computers for my photo retouching, can I get them activated with the same serial number? for Photoshop Elements 13, and premier elements 13

    I use 2 to 3 computers for my photo retouching, can I get them activated with the same serial number? for Photoshop Elements 13, and premier elements 13

    You can activate any two of them at a time, but if you want to use it on a third computer you will need to deactivate one of them before you can do so. To do that, go to Help>Sign Out.

  • When I Crop a video it doesn't fill the frame back up, it just outlines it in black and stays the same size

    When I Crop a video it doesn't fill the frame back up, it just outlines it in black and stays the same size

    No, I am using the crop function, and the directions say after I press done it will fill the frame, which worked a year ago. Now when using th Crop function, the black area stays black and the cropped video stays the same size. I even shared it to a Master file to see if it would process during sharing, but the black area remained black and the cropped video remained the same size. Still a bit frustrated.

  • My Safari window has "zoomed in". I can't get it back to the regular size. How do I do this?

    I have a 27 inch new iMac.My Safari window has "zoomed in" and I can't get it back to the regular size. I am using Lion 10.7.3. Can anyone help?
    Thank you. 
    docbobbie

    If it's just the Safari window, Press Command - 
    several times to reduce.
    If it's the whole screen, including menubar and dock then Hold down the Control key while you scroll down.
    Regards,
    Captfred
    Also, If you're using a Magic Mouse, a double tap on the mouse with one finger will zoom, do it again to unzoom.

  • How can I enlarge my tabs and keep them the way I set them? My page zooms in and out but my file, bookmarks, etc. tabs stay the same size.

    using the view tab, I select Zoom. Zoom in only increases appearance of web page. The tabs (File, Edit, View, History, Bookmarks, Tools and Help) all remain the same size! Way too small to read! This sucks and I don't LIKE IT!

    That sounds very handy. Nice going. A kind of backup would be to
    create a folder in the Bookmarks Manager, and keep a list of links there.
    Just one note. The sessionstore file shows the last windows / tabs that
    are open. Because the window with the 90 tabs was closed first, then the
    other, that is what caused your issue.
    Please edit the post title by adding '''==Solved==''' to it. Others may think
    you are asking for help, not offering a solution.

  • Is there a native app/software that will get my photos all the same size?

    I know how to do this with photoshop but I'm not sure if there is any Apple native app/software that will do this for me. 
    Lets say I have 5 photos of different sizes and I want them all the same size.  I know I could reduce them all in preview but that doesn't allow me to move the photo around and cut out stuff I don't want in it.  Or I could crop them in Preview but then they are not automatically all the same size. 
    The way it works in photoshop is:  I open up a new project that is the same size I want the photos to be.  Let say 900x644.  Then I copy one of the photos I want in that size (lets say it somewhat bigger) and when I paste it into that blank new project that is 900x644 I can move the pasted photo around to get it so what I want to fit into that newer smaller size is there.
    Is there any way to do this without special software on a regular Mac.  I'm trying to help a family member who doesn't really want to buy or learn a complicated graphics program.  They have iLife 11 BTW but I don't see a way to do it with iPhoto.
    Thanks for any ideas you may have!
    Susan

    Use the Automator app (it's in the app folder) to resize a batch of photos:
    http://osxdaily.com/2011/12/20/batch-resize-pictures-in-mac-os-x-using-automator /
    I just tried this and it works and is fast.

  • How can I make all my clips the same size

    Right now I have them in the time line and have used for all of them the option scale to frame size, yet some get full screen size and some don't, I want them all the same size, what can I do?
    Greetings

    Select the clip in the Timeline, open the Effect Controls panel, use Scale to increase or decrease the size of the image.
    Peter Garaway
    Adobe
    Premiere Pro

  • How do I set a fixed page size in Muse so that the window always stays the same size

    how do I set a fixed page size in Muse so that the window always stays the same size

    Hi Aish & thanks for responding;
    I would like the window size to stay the same for the entire site and not be
    able to scale to drag & scale it. ie 950 pixels x 500 pixels.
    Thanks,
    JB
    On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

  • Why don't the finder windows stay the same size?

    When I size a finder window (i.e. Pictures) they are never the same size the next time i open them, why?

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 10.0 r45
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How can I get string that is the same as the name show on the Jtable UI

    I need to implement the jtable keystore searching feature.
    but I face one problem. because in my application, there are many different objects for the data vector in the model of different tables.
    in order to using the same class to do the search for all of the tables. I need to get the same string for the items showing in the table instead using
    table.getValueAt(r, c) to get a object. threrefore I can compare two strings.
    any advice is appreciated.
    Jack Tie

    but the problem is Can we make sure the string we get
    from table.getValueAt(r,c).toString
    is the same as the string show on the JTable UI.That probably depends on the TableCellRenderer that is asked to render that particular column. I would assume that the default behavior is what you want, i.e. that the renderer uses toString() on the Object.

  • How can I get page 2 in the same format?

    I have just completed the first sheet in Numbers, and I would like to know how to bring up successive sheets in the same format.
    To get the first sheet, I went to:
    Numbers
    File
    New from template chooser
    Blank
    Now I have filled that sheet and would like to continue with sheet 2.
    I tried clicking on Sheet in the toolbar, but got a very small sheet, not full size.
    Thanks for the help.

    Depending on how your margins are set and the height of your table rows, you will get some number of rows per page. Your only control of where the pages break is with those controls. Margin setting is a Sheet Property and can't be changed page by page, but if there's a particular row that you want to end a page with, just increase the height of that last row until the rows below pop to the next page.
    If you have a Header Row, you can ask it to repeat at the top of each page, so you don't have to manually repeat the column headings.
    Knowing how to easily change the dimensions of a table, in rows and columns, is amongst the basic stuff covered in the Numbers User Guide. You can get it from the Help Menu. A good read on a Winter's evening.
    Jerry

  • New Mac Air and HP monitor.  The monitor only displays the background.  How Can I get both to display the same thing?

    I have a new Mac Air and want to use my HP Monitor HPLP2475w to save $$.  I attached it to the Mac Air but all I get is the background of my laptop.  How do I get this to match or use in the dual mode.
    Thanks,

    Hi Jackie,
    Welcome to the Support Communities!  How did you attach the Macbook Air to your HP Monitor?  What cable did you use?  The article below will explain how to setup the display.  Video Mirroring is the option that will allow you to see your computer's display on your HP.
    OS X Yosemite: Connect a display
    http://support.apple.com/kb/PH19035?viewlocale=en_US
    You can easily view the contents of your Mac on a display, like an Apple Thunderbolt Display, or on your TV.
    Connect an Apple Thunderbolt Display: 
    Plug the display’s cable directly into the Thunderbolt port  on your Mac. 
    Connect an Apple LED Cinema Display: 
    Plug the display’s cable directly into the Thunderbolt port  on your Mac. 
    Connect a TV or display with an HDMI connector: 
    Plug the cable directly into the HDMI port on your Mac. For more information about using a TV, see Use your TV as a display. 
    Connect a display with a VGA connector: 
    Use a Mini DisplayPort to VGA Adapter to connect the display to the Thunderbolt port  on your Mac. 
    Connect a display with a Mini DisplayPort: 
    Plug the display’s cable directly into the Mini Display port  on your Mac. 
    After you connect your Mac, the contents of your screen automatically appear on the display or TV. 
    If your display uses a video port that’s not available on your Mac, you may be able to use an adapter to connect your display. For example, If your Mac doesn’t include an HDMI port, you can use a Mini DisplayPort to HDMI video adapter with the Thunderbolt port on your Mac.
    OS X Yosemite: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH19039
    Set up the displays for video mirroring
    Video mirroring shows the entire desktop on each connected display.
    Choose Apple menu > System Preferences, click Displays, then click Display.
    Set both displays to the same resolution.
    Click Arrangement, then select Mirror Displays.
    Enjoy your new Mac!
    - Judy

  • How does QtCurve get colors to stay the same? Somehow doesn't w/o KDE.

    Basically, the one on the left is qtcurve-qt4 + qtcurve-gtk2 and the one on the right is qtcurve-kde4 + qtcurve-gtk2. I can't figure out what QtCurve is writing to some gtkrc file in order to allow this color synching. Does anyone else use qtcurve-qt4 + qtcurve-gtk2 and get something similar or is there something that I need edit in my gtkrc file in order to have the qtcurve-gtk2 match the qtcurve-qt4 without having to install qtcurve-kde4? (note: I am currently using gnome-color-chooser to adjust my colors. Without it, Qtcurve would be in a blinding white and blue color scheme)

    I have just had a quick read. You may not have had much corrupted before you started playing but unfortunately you may have introduced a few extra problems.
    You don't appear to have done the thing I would do first: delete the password entry in Keychain for any non-working service - they can get corrupted resulting in silly error messages.
    I have checked for the latest Gmail settings and put them below. I advise that you use these with SSL for both incoming and outgoing email.
    Standard Gmail configuration instructions:
    Incoming Mail (POP3) Server - requires SSL:
    pop.gmail.com
    Use SSL: Yes
    Port: 995
    Outgoing Mail (SMTP) Server - requires TLS or SSL:
    smtp.gmail.com
    Use Authentication: Yes
    Port for TLS/STARTTLS: 587
    Port for SSL: 465
    Server timeouts
    Greater than 1 minute, we recommend 5
    Full Name or Display Name:
    [your name]
    Account Name or User Name:
    your full email address (including @gmail.com or @your_domain.com)
    Email Address:
    your email address ([email protected] or username@your_domain.com)
    Password:
    your Gmail password
    I would get the accounts working first before trying to move any further items in ~/Library/Mail
    Once things are working you could try copying individual .mbox folders from a working computer to the problem one. Quit both Mail applications first.
    I use POP on multiple computers and often use one to restore another. I Bcc all outgoing email to myself so all computers have all outgoing messages. I keep messages on the server for 122 days (4months) - slightly tedious to set this on Mail but it can be easily set to a month. I mainly use Thunderbird without any folders except the Archive ones so it is very easy to maintain the same structure on all computers.
    You can always download everything on the server again by deleting MessageUidsAlreadyDownloaded.

  • How can I get a count at the same time I am inserting into another table

    I have a requirement where I have to find out the count(number of records inserted into another table) at the same time I insert into the table:
    Like
    I am copying records from table B to A, while doing this I have to find out how many records I've inserted since I need this count in subsequent steps
    INSERT INTO A
    SELECT * FROM B
    how can I store the count into any variable while doing above statement
    Please advice

    No, Warren that doesn't work!
    SQL> set serveroutput on
    SQL> declare
      2     vCtr  number := 0;
      3  begin
      4     insert into emp2
      5     select * from emp;
      6
      7     select count(*)
      8       into vCtr
      9       from emp2;
    10
    11     dbms_output.put_line('rows created '||to_char(vCtr));
    12  end;
    13  /
    rows created 15
    PL/SQL procedure successfully completed.
    SQL> declare
      2     vCtr  number := 0;
      3  begin
      4     insert into emp2
      5     select * from emp;
      6
      7     select count(*)
      8       into vCtr
      9       from emp2;
    10
    11     dbms_output.put_line('rows created '||to_char(vCtr));
    12  end;
    13  /
    rows created 30
    PL/SQL procedure successfully completed.
    SQL>

Maybe you are looking for