Can't get print cartridges back into slots.

I just got the printer and removed the cartridges which was difficult.  I tried to reinstall them and cannot get them back into the slots.  What am I doing wrong?  I don't want to damage the slots.

Never mind.  I figured it out.  Sorry

Similar Messages

  • I deleted my ibooks author file but the preview is still available on my ipad, can I get the ibook back into ibooks author to continue to edit?

    I deleted my ibooks author file but the preview is still available on my ipad, can I get the ibook back into ibooks author to continue to edit? I have not published anything, just previewed on my ipad but the file seems to be deleted from my imac which is what I was using ibooks author on. Any help is welcome!

    It's not a 'process' at all.
    If it was easy/straightforward, people would be turning store versions into iBA versions left/right and all **** would break loose. It's not and that's a good thing, sorry
    Work up from whatever version you have.
    Any work you value should be backed up....period. That backup should be used and tested regularly. Consider this a lesson learned, perhaps. Good luck in the future.

  • How can I get my materials back into EBP 5.5?

    I have executed an initial replication of a single material into a clean EBP 5.5 (SRM 5.0) , i.e. no product master has ever existed
    After changing MATERIAL filters in R3AC1 and afterwards replicating using R3AS I managed to get more materials into the EBP 5.5 but found out that my filter settings had to be changed. So i deleted all product master (COM_PRODUCT_DELETE_ALL) succesfully changed my filter and ran R3AS but no materials was replicated... I have checked SMQ1 and SMQ2 which were empty. I have even tried to go back to the starting point of replicating just the one material and still no luck (even synchronized filter with R/3). I have gone through a number of notes. I have gone into SMWP and there are some red lights but e.g. 'Adapter Status Information' and 'System Settings' looks fine.
    How can I get my materials back into EBP 5.5? Is it a problem of changing filters and doing intial replications continuosly?
    While writing the above I have just now created a new material in ECC 6.0 and set up the filter to replicate just this new material and it was succesfully replicated to EBP 5.5 with product master! I guess something has to be cleaned up before I can get my materials back into EBP 5.5??? How???

    I managed to replicate all my materials with the broad range filter definition after working my way through all the errors in SMW01. However, I still don't understand why I couldn't make an initial replication of a single material (previously deleted)... anyway it is working now
    Thanks for all the help!

  • How can I get a parameter back into a servlet invoked from an IMG tag ?

    I'm using a servlet to create several graphical plots per JSP i.e. per HTML page. Each graph is supposed to be different, according to a parameter which I want to pass back from my JSP. I'm getting several plots but they're all the same!
    I've tried setting an attribute in the session object before each IMG SRC= , but all I get is each plot the same! In fact, my debugging efforts show that the servlet is only called once despite 3 calls, each with a different session parameter value. I'm not sure the session parameter values are getting used properly.
    I just can't find a way of getting a parameter back into my servlet which is invoked from the IMG tag (i.e. SRC= "servlet name").
    Can anyone tell me the best way to pass a parameter back into a servlet which is invoked from an IMG tag? Can the request object be used? I can't, at the moment, see how it could be used?
    I'll certainly be very grateful if anyone can help with this - could even be useful for others as well!

    You said that, "by moving a copy of Mobile Docs back to the Library, from which I had moved it, my documents reapperared in Cloud." That says that you actually moved it. Obviously, I can't tell exactly what you did, but it sounds like you may have thought you were just putting it in the sidebar, but you actually put it somewhere else. The sidebar is not a location to put things, just a way to create a quick shortcut to access a file or folder, so you can't put things "back" from there.

  • Accidentally hit the 'trim comp to work area'. Now I can't get my files back into comp timeline.

    I'm using After Effects CC on my macpro. When going to add a shot to the render queue, I accidentally hit the 'trim comp to work area' and didn't notice what had happened until I went to go back to work on other shots. I tried to hit Control Z but it was too late it seemed and it wouldn't go back to how it was. i tried resetting the length of the comp and putting the files back, but no use. Tried making a new comp and copy and pasting all the files in the side panel of my orig comp, but nothing. Tried re-adding the same file from the project window and copying and pasting the effects keyframes from the orig shot to the new one but they didn't line up properly.
    I still have all the files in the comp side panel but can't seem to get them back into the now extended timeline. I still have all the effects I've been doing for the past 3 weeks, but can't do anything to get them into a position where I can continue to manipulate them.
    I've searched a bunch of forums and can't find this problem anywhere.
    Have I lost all my work? Please help.

    It appears that you've pushed those layers into negative time, which you can't view in the Timeline. To get the layers back into the Timeline view, you'll need to move the layers in time with keyboard shortcuts. I assume that you've got your layers arranged in an edit, and you want to preserve their relationships, so do the following:
    Select all of the layers.
    Hold down Alt/Option+Shift and press Page Down until the layers are visible. This shortcut moves layers 10 frames later in time. Removing Shift moves them 1 frame at a time. Using Page Up instead of Page Down will move them earlier in time.
    Another useful pair of shortcuts is [ and ], which set the in or out points of the select layer(s) to the current time. But you probably don't want to use those shortcuts in this case because you'll lose the time relationships of your edit.

  • How can I get imported mail back into standard inboxes? 10.3 to 10.5

    I'm moving from 10.3 to 10.5 and have managed to copy all my mail and settings over from old system manually. Then used Import to point mail to the mboxes. Now all my mail is in Imported mail folder. It's a good start but is there a way to get it all back into the main Inbox so I can carry on as before? I have 4 accounts. Can't seem to drag&drop. Could make new folders as suggested in another thread but can only create folders in On My Mac section. Any suggestions? Weirdly the imported mail has duplicated all the folders (iboxes/outboxes etc) and only one of them actually contains mails...

    Of everything I read nothing mentioned the simplest way of selecting a folder in the import folder e.g. Inbox for an account and then selecting all the mails in that folder and using the Message > Move To menu command. I hope this helps somebody.

  • Can't Get External music back into itunes with song rankings

    For various reasons my wondows PC crashed and I've had to clear out various drives.
    No problem I thought, because I regularly back-up my 10,000 plus songs on an external hard drive.
    Problem is that when I connect it to the PC and try to copy the songs into itunes I do not get my song rankings appearing any more, I just get the other ID3 tags details. Where are they stored and can I find them again ?
    Also,
    all the while the external HD is attached and I've copied some folders into itunes, all appears fine with the songs showing and playing, but when I disconnect the song still appears in my open version of itunes but then no longer plays and says it can't find the song ?
    Help ! I don't want to rank all 10,000 songs again and I want the songs all back on my PC.
    I could use my 60 Gig ipod to reload the PC but I only have about 80% of all the music files I own, so the obvious choice is the other external drive with everything from my PC on it. Can you help me please ?

    luckily that is also backed up on the external drive too so I'll try looking there, but do you have any thoughts on why I can't get the backed up files to stay on the PC correctly ? because until they are back on my PC I can't use it or get the rankings back right?

  • Can't get ink cartridge back in

    I have an HP Photosmart, I removed the black ink cartridge to replace it and now I can not get it back in, any suggestions

    Hi, what photosmart model do you have?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • My screenshots have stopped going to my clipboard. How can I get my screenshots back into the clipboard?

    I use Command (⌘)-Shift-4 to grab screenshots of diagrams to make flashcards with on a daily basis. But now my screenshots have stopped going to my clipboard - and they don't paste into my flashcards.
    Dropbox popped up and asked me if I wanted to use it to save my screenshots and I said No Thanks, but then right after that my screenshot function stopped working. I can still save shots to my desktop, but I'd love to not clutter my desktop.  The screenshots are not going to dropbox either, I checked.
    Can someone tell me how to get my screenshots to go back to going into my clipboard?
    Thanks!

    Thanks Lanny! I actually typed in the wrong command into my question - I meant to type what you mentioned. But I did end up figuring it out: for some reason the shortcut to screenshot into my clipboard changed. I was able to restore all my shortcut commands back to default and it worked again!
    Thanks!

  • How can I get my music back into iTunes after erasing my disk?

    I had to reinstall Windows XP, erasing everything on the hard disk. I had saved the music files with backup software, so I now have them back. But iTunes won't add them to my library. I tried importing songs from a new CD to see where iTunes put those files, and then copying an album folder into the same location. But Windows wouldn't copy the files inside the foder. Nearly all the songs were originally taken from CDs in my collection, and the songs are still on my iPod Nano.

    jjdevney wrote:
    I had to reinstall Windows XP, erasing everything on the hard disk. I had saved the music files with backup software, so I now have them back. But iTunes won't add them to my library. I tried importing songs from a new CD to see where iTunes put those files, and then copying an album folder into the same location. But Windows wouldn't copy the files inside the foder. Nearly all the songs were originally taken from CDs in my collection, and the songs are still on my iPod Nano.
    Wow,
    Wonder why XP won't let you copy files?, perhaps you used a different user name?
    Or these are the old DRM versions of the songs? You should be able to log into your iTunes account and authorize the computer and iTunes should recognize the songs.
    Well since you have the iPod Nano, you can head over to iLounge and ask them what current third party software works to move your iPod Nano music back to iTunes.
    Hope that works out for you

  • How can I get my emails back into my hotmail account from the Mail app

    Dear Apple support team
    I started using the Mail app some weeks ago because I apparently needed it, to be able to open an invitation for an iCloud shared photo folder. As soon as I registered my email into the Mail app all my emails from my hotmail account where deleted from the hotmail server. I really hope that this is possible to revert because if not, it'd be a catastrophe for me. I use that account from several devices for work, and I need those old emails in the server to be able to work again!
    I'd really appreciate any advice on this!
    Many thanks,
    Pier

    You can use the iPhoto Export feature to do that. Furthermore, it's the best way if you want to keep the quality of the pictures.
    To put the photos in the Pictures folder, first open iPhoto and then, select Edit menu (on the menu bar) > Select All. Finally, go to File menu > Export, and export your photos to the Pictures folder, so they will appear on all Time Machine backups you create since then

  • How can I get my library back into 7.1?

    I've uninstalled 7.2 and re-installed 7.1 but it won't upload my library. It keeps telling me that it can't recognize the itl file and labels it as "damaged" and creates a new itl file with nothing in it.

    I dragged the folder with all of my iTunes music into iTunes 7.1 and it copied, but I got an error saying that it can't be saved (-1450) I believe this is the same error I originally got when I upgraded to 7.2
    Somebody please help!!

  • How can you get a transport back

    I did the following.
    I did not have my routes set up in stms
    I released some tranports
    How can I get these tranports back into any of my systems.
    Thanks

    Hi Jeremy...
    If the transports were released as a workbench request you should be able to find them in the transport directory, that should be <drive>:\usr\sap\<sid>\trans\ you need both the co-file and the data file. the names of the files should be K<number>.<sid> for the cofile and R<number>.<sid> for the datafile
    You should configure your transport route properly but if you get this files you can transport manually by copying those files to the transport directory of the destination system and use STMS -> choose import queue -> go to extras -> Other requests -> Add
    Hope this help!
    Juan

  • I just created a slide show with music and tried to export it to a thumb drive to play on another computer.  File seemed too large and slow to export, so I deleted the music. Now, I can't get the music back on it and don't know what to do...

    Can't export my slide show.  Is the file too big? Tried to export without music.  Now, can't get the music back into it.

    If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Can't put my clock back into my menu bar

    I had some operating glitches with my 27" iMac running on 10.8.3 yesterday so I verified my permissions using Disk Utility. However, since I did this, I can't get my clock back into the menu bar. When I access it in System Prefs, and click on 'Clock' I get a beachball for a while. Then it allows me to check 'show date and time in menu bar'. But after some more spinning ball, it unchecks the box itself. What's going on? Anybody know?

    Thanks! I had done that, but not re-started properly. All good now.

Maybe you are looking for