Can't get printer to connect to my Galaxy Note3

I can't setup my hp2540 printer to my Galaxy Note3

Hi alBorderp, welcome to the HP Forums. Your Deskjet 2540 is supported to work with the 'HP All-in-One Printer Remote' app. First you would need to get the printer installed wirelessly on your home router, or using Wireless Direct. Step one of this document shows you how to enable Wireless Direct if you wish to just communicate directly to the printer from your Tablet: Printing from an Apple or Android Mobile Device with HP Wireless Direct
Once your printer is available Wirelessly, you can install the 'HP All-in-One Printer Remote' app. After it is installed, you can tell your tablet to connect to the same network that the printer is on. If you are on your home router, make sure the tablet connects to the 2.4ghz network, as the printer cannot connect to the 5.0ghz network.
Here is an FAQ on the app in question: HP All-in-One Printer Remote Mobile App FAQs
Let me know if you have any difficulties, I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Can't get printer to connect to computers

I have an HP Photosmart 5512 all-in-one printer and I"m trying to get it to connnect to my computers in my home. I have a HP 2000 laptop running windows 7. I have tried all the trouble shooting software the company provides, I have unplugged and waited on router and printer. I uninstalled and reinstalled software on computer and printer. I have tried everything the company site has to offer to get this printer connected. I have even called the customer support and they won't help me even though I"m using their products, because its been a couple of years. So if there are any techs on here who know anything about this, please help. I'm about ready to throw it out the window. Its new, I only used it once a couple of years ago and put it back in the box. Now I need it for college and I can't get it to connect. Help Please.

Make and model number of modem?
Make and model number of router?
Computers connected via wire or wireless?
OS of computers?
Please detail all steps you have done to troubleshoot the issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can't get printer to connect to my samsung galaxy tab 10.1.

Hp photosmart premium C410A Windows 7 64- Bit won't print. after installing app from the market it still wont print. wondering is there another app that I need for this to work? oh yes trying to connect with my samsung galaxy 10.1 tablet. any ideas?

Elishaf wrote:
I have the same problem. My HP printer connects easily to my Verizon Router network and I can print from my laptop - via this network. My Samsung 10.1 table connects eaily to the router for WIFI. However, when I scan, with the tablet, for bluetooth devices to connect to, so I can print from the tablet, it does not see the network or the printer. I am obviously missing something here. Thanks for any help

Can't get printer to connect to laptop

I have a Toshiba laptop running Vista and a HP C5180 printer. I've had the laptop connected to the printer wirelessly previously and it won't connect any longer. I have a comcast xfinity wireless gateway modem that is about a year old. I don't know what other information you need from me to help.

Hi dimill,
I understand you have a Photosmart C5180 that is no longer communicating wirelessly with your computer. I'm sorry to hear this, but I will definitely do my best to assist you!
I will suggest that you download and run the HP Print and Scan Doctor and follow the instructions it suggests for you.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Can't get printer to connect to computer

When I try to connect my printer to my desktop the installaition fails due to it not finding the driver software. after a phone call with customer service I was told it is an issue with my computer and not my printwer because I was able to connect my printer to a laptop throuch wireless. please help.

Hi @BillyP0528,
Let's start with some of the basics. Please post back with the answers to the following questions and we will proceed from there;
What printer model do you have? How Do I Find My Model Number or Product Number?
Is the printer connected wirelessly or with a USB cable?
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Do you have any other HP Printers installed on this computer? If so, do you still have the printers?
Is this an HP laptop or a different brand?
What operating system, and version do you have? Mac or Windows?
While I wait to hear back from you, if you have Windows 7 or higher, please download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I can't get a proper connection to my Epson R1800 printer. I need to be able to choose Paper type and size. It keeps saying that the downloads are fine, but the System Library Extensions SMC1255TX.kext aren't working?

Dear sweet Apples, that know all the answers...
I can't get a proper connection to my Epson R1800 printer. I get the basics , but I need to be able to choose paper sizes and paper Types.
It keeps saying that the downloads went fine, but then it says that the System/Library/Extensions cannot be used because SMC1255TX.kext
isn't working. My downloads are useless as a result

Did you restart the printer?

New Netgear Router and now I can't get a wireless connection for my K5400 printer.

I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

On the printer: Setup > Network > Restore Defaults. From the same Network menu, run the Wireless Setup Wizard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hey my brother just got an ipod touch and i can't get it to connect to itunes what to i do he's really excited HELP!! :)

hey my lil brother just got an ipod touch and its saying connect to itunes and its plugged into my computer and im at the itunes website but i can't get it to connect can anyone HELP ME??!! my mom said that she wants his ipod to be connected so that its on my itunes account so i can see if he buys anything.
PLEASE HELP ME !!!
~Maddie

iOS: Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar

Just brought home my IPad. I have the MIFI on and it is bringing in a signal to my IMAC but I can't get it to connect to my IPad. Any suggestions?

I just brought my IPad home but can't get it to connect to my MIFI. The MIFI is on and working as it's sending a signal to my IMac. How do I get it to recognize the MIFI so I can go online with my IPad?

Does your iPad see you network? If no, are you broadcasting its SSID?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I can't get a database connection.

Background: I've already built two sites with databases using DW CS6, PHPMySQL, and the same hosting company, so I know they allow remote connections. (I'm developing using the remote host because I've never found a tutorial for how to move it all from local XAMPP to my host - but hey, it's been working fine so far.)
I set up the database using CPanel Databases, added the user and password, no problem. Went into PHP MySQL and added a table, logged out and back in, the table is there as defined.
In DW, I double-checked the testing server, tested the connection, and it connected successfully.
Then I opened a page for editing and added a database connection (all as I had done on the previous two sites that work fine). I named the connection, entered the user, the password and tried to SELECT a database. No luck. HTTP Error 404. I manually added the database (the only one) and clicked test. Again no luck. HPPT Error 404.
I double checked the testing server, double checked the DB information, and nothing seems to work.
Any clue what I'm doing wrong? Thanks so much if you can help.

UPDATE:
Okay, this is really getting weird. As a typcial computer nerd, I know there are many roads to success, so if one doesn't work, try another.
Trying a different solution, I opened a test.php page and wrote the following code:
<?php
echo "<p>Now testing database connection.</p>\n";
$db_server = "localhost";
$db_username = "mcsb831_mbradmin";
$db_password = "***(redacted)***";
$link = mysql_connect($db_server, $db_username, $db_password);
if (!$link) {
    echo "Could NOT connect.<br />\n";
}else{
    echo "Connected Successfully.<br />\n";
    mysql_close($link);
I loaded the page to the server and guess what? I got the message "Connected Successfully."
Hooray! Now I know the database server is running, and the database and user name and password are valid.
I went to the DW MbrConnect01.php file (the name of the CONNECTION file that Dreamweaver creates when I tried to make the connection through DW), and verified the database name, user name, and password were correct -- I copied and pasted them from the code above to make absolutely certain there were no transcription errors. Here's that file:
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_MbrConnec01 = "localhost";
$database_MbrConnec01 = "mcsb831_members";
$username_MbrConnec01 = "mcsb831_mbradmin";
$password_MbrConnec01 = "***(redacted)***";
$MbrConnec01 = mysql_pconnect($hostname_MbrConnec01, $username_MbrConnec01, $password_MbrConnec01) or trigger_error(mysql_error(),E_USER_ERROR);
?>
And guess what?
I GOT THE STINKING ERROR MESSAGE AGAIN!!
(See previous post for the full text of the message.
Yes, I checked the server using an FTP browser for the presence of the required files, and they are there.
Does anyone have a clue what's going on here? I would absolutely love to use DW's DB automation tools, but none of them will work if I can't get a DW connection to work.
I notice that my code uses mysql_connect while the DW-generated code uses mysql_pconnect (which is deprecated), could that be the culprit? How do I fix it if so?
PLEASE, can someone help?

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

Can't get printer to connect to my Galaxy Note3

Similar Messages

Maybe you are looking for