Can't get printer to start printing

There seems to be a lot of printing issues here. Mine is this: I have a Tally Genicom 8008 which Leopard seems to be able to see as it appears in my printer list. Plus, when I click Print in an application the document appears in the print queue. The problem i am having is that the Status in the Print Queue always says Stopped and nothing prints.
The printer is on and ready, and the print queue says 'Printer Ready' and I've tried clicking Resume but nothing... nothing seems to go to the printer. Any ideas?

According to Tally's website, there is a 10.4 driver for this printer, but there doesn't seem to be one for 10.5. Have you contacted them? Is there anything in Console that might be helpful?

Similar Messages

How can I get my ipad to print to my printer on the network

I can not get my Ipad to print to my network printer. The printer is an HP6500a plus officejet

You can use HP ePrint, Apple's AirPrint, or HP ePrint Home & Biz mobile app when it comes to the 6500A Plus eAIO.
Here are some articles pertaining to usage of these apps/methods of wireless printing that may help!
General how to for all methods:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
ePrint mobile driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ds-104730- 1&cc=us&dlc=en&lc=en&product=4083977&tmp_track_link=ot_search
Getting started with eprint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641663&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
You want to make sure your printer has the latest firmware installed to support airprint. You can find that software by navigating your control panel on the printer to updates.
Once this has been performed it should be viewable as an Airprint compatible device through the ipad.
You can also download the ePrint Home & Biz app for free from the apple catalogue and use that method as well with much the same result, as well as online management capabilities on the printer.
Hope this helps!
I work with HP.

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

in the iPhoto preferences change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
LN

How can I get another phone to print on my printer

how can I get another phone to print on my printer

Which printer?
Which Phone?
What connection type?
Please add some more details and then we will be able to assist you.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can i get my ipad to print to my HP deskjet f4580

How can i get my ipad to print to a HP deskjet F4580

Hi there, probably the easiest way is to install the HP ePrint mobile print app on the iPad. Take a look at the information here to find out more about how this solution works and to find a download link to the App store in iTunes http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?ap...
Feel free to post back if you're having any problems. All the best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

Im not exactly sure what you mean by color profile..can you specify? So i have a dslr canon and take great portraits and tune them to exactly how I want them to look, they dont print at all like the colors presented on my screen. If i antique them then they print yellowish. Ive even tried printing them at walgreens because i thought it was my new printer. Hp hasnt let me doown til now. Is ot a printer setting? Ive never had this kind of printing issue.

How can I get my Epson NX625 printer back on line?

How can I get my Epson NX625 printer back on line?

The solution to your issue is in this thread:https://discussions.apple.com/thread/5233149
Specifically this post:
"astonishingly as it may seem, epson support sent me this 6 hours after i contacted them-
Subject
when attempting to print the epson print program shows "stopped - 'filter' faile
Discussion Thread
Response (Rodolfo M)
08/16/2013 03:21 PM
Dear Robert,
Thank you for contacting Epson.
I am sorry to hear that you are experiencing difficulties with your Epson Artisan 710 because of rastertoescpII error. To resolve this issue, please try the following steps below:
Power off the printer.
From the , select System Preferences.
Choose Sharing.
Check if "Computer Name" field is empty or not.
If the "Computer Name" is empty enter a name for the computer.
Restart the Computer.
Test if you are able to print.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.
Jun M."

I can't get my iPad to print with a HP 3520A printer

I have bought a HP 3520a printer and having connected it and loaded the software then registered for eprint I can't get my iPad to print. Can anyone help?

As it's not one of the printers that support AirPrint (http://support.apple.com/kb/HT4356), you will probably need an app - see if Kodak have their own app in the store, or there are third-party apps such as Print Central For iPad and Print n Share which might work with it. You could also do a search on here to see if anybody else has the same printer and see if they mention a particular app.

Printer suddenly started printing blurry and double vision like

Printer suddenly started printing blurry and double vision like. I have cleaned all i can and aligned the printer heads muliple times, but no difference

I did a quick search and came across this. Although it is for a 432, hopefully this imformation helps as canon printers are assembled relatively simular.
http://forums.usa.canon.com/t5/Printer-Multifunction-Support/I-had-a-paper-jam-on-my-MX432-and-since...
MY EQUIPMENT:
EOS Rebel T4i
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
(2) B+W 5.8 010 UV - Haze 1x MRC (F - PRO Series filter)
HOYA 58mm HMC Multi-Coated ND8 Filter

Adobe PDF printer and "Start printing after last page is spooled"

Hi,
After calling the Belgian Support for Adobe Product, I'm trying to have some information here.
Hope to get some help.
We use acrobat pro XI on windows 7 client and when we print a test page with the "adobe pdf" print queue on network share, we get a printing error when the "start printing after last page is spooled" is selected in the advanced tab of the printer queue. (document is not generated, and stay in the spooler with an error).
This problem is not present if printed localy or when we use the "start printing immediately" or "print directly to the printer".
The support agent from adobe Belgium told me that the reason is generating adobe pdf on network share is not a supported operation. We have to save the document localy all the time.
Is it really an answer from Adobe ?
Do you have an other explanation ?
Thanks for your help,

Thanks for your very good explanation Dov.
We use Adobe livecycle for this kind of purpose.
The situation described is diffrent, but you completely repond and I will be able to have some element to find a solution.
In fact, I'm implementing a softwate called DeviceLock, used to control connected devices (usb, network, drive). But this software, once installed, change the local printer parameters from "print directly to the printer" to ""start printing after last page is spooled".
As we use redirected folder in our environment and users cannot use local drive (for user's data backup) you will understand the problem.
Of course, we should be able to force the correct settings back, But Devicelock seem to change this settings after policy refresh.
I have contact with Devicelock about this problem of course as their software modify the settings, but was looking for a reason why we were not able to use the "start printing after last page is spooled" parameters with adobe Printer.
Thanks for your explanation,
PS:The driver's dialog won't prevent you from setting “Start printing after last page is spooled” or “Print directly to the printer” but setting either of those options will cause the operations to fail as you note.
note that only "Start printing after last page is spooled" cause an error and this, only for network share location. The "print directly to the printer" or the "start printing immediately" work fine either on a local drive and a network share

HP Officejet 4355 Printer suddenly start printing very slow! HP technician advice needed!

Hi,
My HP Officejet 4355 All-in-One Printer suddenly start printing very very slow! I've had it for 4+ years and by God it never ever gave me any problems (maybe minor once, but never actually drove me crazy), considering that i used it very often at home and in the office. I always buy original HP ink cartridge (except that once, when i wanted to see how the refill works - it doesn't), and now latest cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page, now it take 10-15 minutes! Could anybody suggest help?
Please do not talk about computer/Windows/USB settings, they all work fine. I disconnected printer from PC and did "Align Print Cartridge". First step, the printed part, took 10 minutes, second step, scanning part, did not go through. It said printer can't allocate aligning page...
By the way, i did look around for the answers and found that some people say it's a ink cartridge fault. But i used this cartridge for a few months now, it's almost, but not yet finished, it was printing perfectly so far. Printouts during this issue come out OK, 7 out of 10.
Anybody have any ideas? If I could attract professional help of HP technicians, it would be perfect.
Thank you.
© RedStarLimitless ©
This question was solved.
View Solution.

Even though they still have ink a cartridge may fail and give the results you are seeing, where the printer makes a swath and then waits 10-15 seconds for the next swath. This is caused by the failure of one of your cartridges. Removing each cartridge and cleaning the contacts on the cartridge and printer may resolve the issue.
I do not recall if the Officejet 4355 supports reserve mode, but try the following: Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

I can't get X11 to start on my new install

Hello All,
I'm a recent convert from Ubuntu (surprise), and I can't get X11 to start. I have an intel i3 cpu with a intel hd graphics 3000 card. Here is my /etc/X11/xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "record"
Load "glx"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "FallbackDebug" # [<bool>]
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "Shadow" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is my Xorg.0.log:
[ 1516.158]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 1516.159] X Protocol Version 11, Revision 0
[ 1516.159] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 1516.159] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 1516.160] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 1516.160] Build Date: 05 March 2012 05:59:48AM
[ 1516.160]
[ 1516.160] Current version of pixman: 0.24.4
[ 1516.160] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1516.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1516.162] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:02:00 2012
[ 1516.163] (II) Loader magic: 0x7cef60
[ 1516.163] (II) Module ABI versions:
[ 1516.163] X.Org ANSI C Emulation: 0.4
[ 1516.163] X.Org Video Driver: 12.0
[ 1516.163] X.Org XInput driver : 16.0
[ 1516.163] X.Org Server Extension : 6.0
[ 1516.165] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 1516.165] List of video drivers:
[ 1516.166] intel
[ 1516.166] fbdev
[ 1516.166] (II) LoadModule: "intel"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1516.167] (II) Module intel: vendor="X.Org Foundation"
[ 1516.167] compiled for 1.11.99.903, module version = 2.18.0
[ 1516.167] Module class: X.Org Video Driver
[ 1516.167] ABI class: X.Org Video Driver, version 12.0
[ 1516.167] (II) LoadModule: "fbdev"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1516.168] (II) Module fbdev: vendor="X.Org Foundation"
[ 1516.168] compiled for 1.11.99.903, module version = 0.4.2
[ 1516.168] ABI class: X.Org Video Driver, version 12.0
[ 1516.168] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1516.169] (II) FBDEV: driver for framebuffer: fbdev
[ 1516.313] (++) Using config file: "/root/xorg.conf.new"
[ 1516.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1516.314] (==) ServerLayout "X.org Configured"
[ 1516.314] (**) |-->Screen "Screen0" (0)
[ 1516.314] (**) | |-->Monitor "Monitor0"
[ 1516.314] (**) | |-->Device "Card0"
[ 1516.314] (**) |-->Screen "Screen1" (1)
[ 1516.314] (**) | |-->Monitor "Monitor1"
[ 1516.314] (**) | |-->Device "Card1"
[ 1516.314] (**) |-->Input Device "Mouse0"
[ 1516.314] (**) |-->Input Device "Keyboard0"
[ 1516.314] (==) Automatically adding devices
[ 1516.314] (==) Automatically enabling devices
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.315] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.315] Entry deleted from font path.
[ 1516.315] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.315] (**) FontPath set to:
[ 1516.315] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1516.315] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1516.315] (WW) Disabling Mouse0
[ 1516.315] (WW) Disabling Keyboard0
[ 1516.318] (II) Loading sub module "fbdevhw"
[ 1516.318] (II) LoadModule: "fbdevhw"
[ 1516.319] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1516.319] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1516.319] compiled for 1.12.0, module version = 0.0.2
[ 1516.319] ABI class: X.Org Video Driver, version 12.0
[ 1516.319] (EE) open /dev/fb0: No such file or directory
[ 1516.319] (WW) Falling back to old probe method for fbdev
[ 1516.319] Number of created screens does not match number of detected devices.
Configuration failed.
Here is the output of the startx command:
hostname: Unknown host
xauth: (argv):1: bad display name "/unix:0" in "list" command
xauth: (stdin):1: bad display name "/unix:0" in "add" command
X.Org X Server 1.12.0
Release Date: 2012-03-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.9-1-ARCH x86_64
Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
Build Date: 05 March 2012 05:59:48AM
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 09:51:42 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "/unix:0" in "remove" command
Here is the list of modules and daemons in /etc/c.conf
MODULES=(intel_agp i915)
DAEMONS=(hwclock syslog-ng dbus hal network netfs crond)
I've installed xorg-server and the xorg-apps group, as well as xf86-video-intel, xf86-video-fbdev, xorg-drivers, libva-driver-intel, dbus, and lib32-intel-dri.
Thanks in advance, I hope that I've provided enough information.

Thank you for the reply! I removed the log and ran startx again, giving me the same output. Here is the log:
[ 4825.297]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 4825.298] X Protocol Version 11, Revision 0
[ 4825.298] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 4825.298] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 4825.298] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 4825.299] Build Date: 05 March 2012 05:59:48AM
[ 4825.299]
[ 4825.299] Current version of pixman: 0.24.4
[ 4825.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4825.300] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4825.301] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:57:09 2012
[ 4825.301] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4825.301] (==) No Layout section. Using the first Screen section.
[ 4825.301] (==) No screen section available. Using defaults.
[ 4825.301] (**) |-->Screen "Default Screen Section" (0)
[ 4825.301] (**) | |-->Monitor "<default monitor>"
[ 4825.301] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4825.302] (==) Automatically adding devices
[ 4825.302] (==) Automatically enabling devices
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 4825.302] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4825.302] (==) FontPath set to:
[ 4825.302] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4825.302] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4825.302] (II) Loader magic: 0x7cef60
[ 4825.302] (II) Module ABI versions:
[ 4825.302] X.Org ANSI C Emulation: 0.4
[ 4825.302] X.Org Video Driver: 12.0
[ 4825.302] X.Org XInput driver : 16.0
[ 4825.302] X.Org Server Extension : 6.0
[ 4825.303] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 4825.303] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4825.303] (II) LoadModule: "extmod"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4825.304] (II) Module extmod: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension MIT-SCREEN-SAVER
[ 4825.304] (II) Loading extension XFree86-VidModeExtension
[ 4825.304] (II) Loading extension XFree86-DGA
[ 4825.304] (II) Loading extension DPMS
[ 4825.304] (II) Loading extension XVideo
[ 4825.304] (II) Loading extension XVideo-MotionCompensation
[ 4825.304] (II) Loading extension X-Resource
[ 4825.304] (II) LoadModule: "dbe"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4825.304] (II) Module dbe: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension DOUBLE-BUFFER
[ 4825.304] (II) LoadModule: "glx"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4825.305] (II) Module glx: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (==) AIGLX enabled
[ 4825.305] (II) Loading extension GLX
[ 4825.305] (II) LoadModule: "record"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4825.305] (II) Module record: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.13.0
[ 4825.305] Module class: X.Org Server Extension
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension RECORD
[ 4825.305] (II) LoadModule: "dri"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4825.305] (II) Module dri: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension XFree86-DRI
[ 4825.305] (II) LoadModule: "dri2"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4825.306] (II) Module dri2: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.12.0, module version = 1.2.0
[ 4825.306] ABI class: X.Org Server Extension, version 6.0
[ 4825.306] (II) Loading extension DRI2
[ 4825.306] (==) Matched intel as autoconfigured driver 0
[ 4825.306] (==) Matched vesa as autoconfigured driver 1
[ 4825.306] (==) Matched fbdev as autoconfigured driver 2
[ 4825.306] (==) Assigned the driver to the xf86ConfigLayout
[ 4825.306] (II) LoadModule: "intel"
[ 4825.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4825.306] (II) Module intel: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.11.99.903, module version = 2.18.0
[ 4825.306] Module class: X.Org Video Driver
[ 4825.306] ABI class: X.Org Video Driver, version 12.0
[ 4825.306] (II) LoadModule: "vesa"
[ 4825.306] (WW) Warning, couldn't open module vesa
[ 4825.306] (II) UnloadModule: "vesa"
[ 4825.306] (II) Unloading vesa
[ 4825.307] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4825.307] (II) LoadModule: "fbdev"
[ 4825.307] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4825.307] (II) Module fbdev: vendor="X.Org Foundation"
[ 4825.307] compiled for 1.11.99.903, module version = 0.4.2
[ 4825.307] ABI class: X.Org Video Driver, version 12.0
[ 4825.307] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4825.307] (II) FBDEV: driver for framebuffer: fbdev
[ 4825.307] (--) using VT number 7
[ 4825.313] (II) Loading sub module "fbdevhw"
[ 4825.313] (II) LoadModule: "fbdevhw"
[ 4825.313] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4825.313] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4825.313] compiled for 1.12.0, module version = 0.0.2
[ 4825.313] ABI class: X.Org Video Driver, version 12.0
[ 4825.313] (EE) open /dev/fb0: No such file or directory
[ 4825.314] (WW) Falling back to old probe method for fbdev
[ 4825.314] (II) UnloadModule: "fbdev"
[ 4825.314] (II) UnloadSubModule: "fbdevhw"
[ 4825.314] (EE) Screen(s) found, but none have a usable configuration.
[ 4825.314]
Fatal server error:
[ 4825.314] no screens found
[ 4825.314]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4825.314] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4825.314]
[ 4825.316] Server terminated with error (1). Closing log file.

Can't get WRT54G to start up, gets stuck at "checking computer settings"

Can't get WRT54G to start up, gets stuck at "checking computer settings" at 99% Please help!
If I hit the escape key it will go to the password screen, it looks like the password is already entered for me so I hit enter, but then it just goes back to "checking computer settings" and won't go past 99% again.'
Sorry but the last post mistakenly said the wrong number so I posted this.

If you are running the install CD that came with the router, the behavior you describe is exactly what happened when I tried using the CD today. The CD didn't seem to work with my computer's fixed IP address (not in the 192.168.1.0 network.)
What worked for me was to set my computer to have the fixed IP address 192.168.1.2. Then I was able to contact the router using its web interface at 192.168.1.1 amd make the necessary settings.
The password had NOT been changed from the default despite the install CD software seemingly accepting a new password. The default password worked.
Paul

HT4859 Can I get back to start up assistant after I have set up phone originally

can I get back to start up assistant after Iphone 4 S set up in shop yesterday? Have notes backed up in icloud from old phone and don't know how to get them onto new phone?

Welcome to the Apple community.
In order to return to set up assistant, you will need to restore the phone again.

HT4528 I can't get siri to start when holding down home button?

I can't get siri to start when holding down the home button?

Also, if you want to be able to activate Siri when the iPhone is locked, set Settings > General > Passcode > Siri ON.

Can't get printer to start printing

Similar Messages

Maybe you are looking for