Can't get printers to show after installing 10.5.6

I've tried everything to get my Canon iP6700D connected after installing 10.5 over 10.4.11. Nothing has worked. I downloaded the latest driver for Mac from Canon (version 583). I've trashed the Canon files in Library, Receipts, Preferences before reinstalling the driver. I repaired permissions using Disk Utility. I've called Apple Care. I used their sequence to power everything off and on. They finally said I needed to do an erase and reinstall of 10.5. Any other suggestions?
Thanks,
Rod

Turns out my problem appears to be the USB 2.0 Hub I was using. When I hooked the printer up directly to the iMac, it works as advertised. I wonder what is the issue with USB hubs and 10.5.6? It worked fine with 10.4.11. Any ideas about this one?
Thanks
Rod

Similar Messages

Can't get printers to print after installing new modem

I just installed a new wireless modem. My 2 printers are the OfficeJet 6500 E709N and C7200, operating on Windows 7-64. Both printers are connected to the network, both say they are ready to print, but when I try to print I get an error "Printer-status error". I check the printer status from the cntrol panel and it has the triangle sign with exclamation point inside. When I cancel all documents from printing it immediately goes back to being ready again, but the same thing happens over and over again with both the printers and both computers. Hope this is clear...I'm pretty computer illiterate. I usually can mess around until I get something fixed, but have no idea how it happened. I've been working on this problem for hours and just can't get it. Everything worked fine until I installed the mode, but I was able to connect them both to the network. HELP!!!

Turns out my problem appears to be the USB 2.0 Hub I was using. When I hooked the printer up directly to the iMac, it works as advertised. I wonder what is the issue with USB hubs and 10.5.6? It worked fine with 10.4.11. Any ideas about this one?
Thanks
Rod

Can I get my bookmarks back after installing new hard drive?

Can I get my bookmarks back after installing new hard drive?

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Can't get past setup assistant after installing leopard...

i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
thanks in advance...

mr_magicman,
I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
Okay, how about trying this:
1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
GOOD LUCK!
Bill

I can not get wifi to work after installing new hard drive...

I have a a505-s6965 laptop running vista and I had to replace the hard drive. After doing so and running all of the recovery discs I keep getting an error message about my wifi driver and card reader and also a couple others. Now my computer works but I can not get online even if I do not use wifi. PLEASE HELP!!!
Solved!
Go to Solution.

I've enabled your account ID for searching the general drivers and support pages for specific downloads based on entered model number and descriptions.
The web site search feature is an experimental unsupported BETA currently in its 27th year of testing. The hidden link that is only usuable by yourself and everyone else is:
http://support.toshiba.com/drivers
I've also removed all age verification checks for your account so you won't be challenged for proof of minimum age or style when searching the free web site of drivers available to anyone else and yourself.
Please notice that your search and downloads have been enabled for high speed acceleration and could likely be completed in less time than any unimaginative and ignored response you'll struggle with disguised as your return fire.
I love your user ID, you must remember to bequeath it to me in your expansive trillion dollar estate plan.
"hello, hello, IS THIS THING ON ?!?!!??!!! --Mr. Tinkles "

Can't get lightroom to run after install

I had the demo running on my mac for a while and last week time was up
The start up screen would pop up and then it closed down.
So I ordered the full package and installed from CD but its still closing the first window out so I can't register
Any ideas please?
I have also just ran the upgrade to 1.1 to see if it would fix it but no joy

Dear sweetah,
Found a solution myself. I've re-installed Proruntime 3.1! Although I did have Proruntime 3.1 running it is not working properly after the 10.4.3 update (?). After re-installing it Logic get's passed 'setting up memory' and seems to work fine. You can get Proruntime at
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
Hope it works for you too!
Cheers,
Michel.
G4 867 MHz Mac OS X (10.3.9) PB G4 1.3MHz

How can I get my iPhoto back after installing Yosemite OS X 10.10.3?

Can I have iPhoto and Pictures (Yosemite 10.10.3) both on my iMac? How do I get the iPhoto back on screen and compatible with Yosemite 10.10.3?

Where is the actual instructions to getting my iPhoto back on my iMac? I can't stand this new OS X Update 10.10.3 for the new photo's app! This community page only talks about the 10.10.2 but no instructions on how to retrieve the previous version back?
The new display is awful, not appealing at all, can't label the pictures with names anymore, editing pictures, cropping and etc? Not user friendly! I don't like anything about this new change!

Can't get G3 to boot after installing newHD

Hi. I am a new iMac user -- I got this machine from a friend for my kids and I have no idea how to troubleshoot it. Sad to say if this was a PC I could just run fdisk /mbr and it would just work.
I put a new 20GB HD in this machine. I booted using the OS 8.1 CD. created a 7GB partition. Installed 8.1 to this partition using the erase restore option. I made sure in the control panel that the HD is selected to be the boot disc. Yet when I remove the CD and reboot the machine gets a blinking "?" and just sits there.
Any advice for a mac neophyte would be appreciated.
Thanks much.

Did you set the jumper on the drive to "master"? That is essential, for booting from the drive. Here's a link to some useful information:
http://www.djonmac.com/

Can't get screen to show after login

Hello,
I just purchased the the software upgrade and I get the loading screen, but then my screen just flickers after. Often I see my desktop, but it isn't on my screen long enough for me to even read it. I have a Mac mini from 2009, and just a regular monitor from one of my old pcs.
Please help me!

Turns out my problem appears to be the USB 2.0 Hub I was using. When I hooked the printer up directly to the iMac, it works as advertised. I wonder what is the issue with USB hubs and 10.5.6? It worked fine with 10.4.11. Any ideas about this one?
Thanks
Rod

Can't get flashplayer to show after multiple downloads

I have downloaded flashplayer multiple times for Windows 7, Enternet explorer. After each down load it says it was successful and that I am now running flashplayer. When I go to complete my task it still tells me I need to download flash player. I have been at this for two days now and done everything on the help tab. I still am unable to complete my task. HELP! BTW I am completely computer ignorant, so be kind. Thank you.

See if this helps:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps. Here is what Apple tech support emailed to me:
I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
Please follow this steps:
1) Double tap the home button
2) Hold down on an icon
3) Tap the red "X" on iTunes, and the App Store.
4) Tap Settings > Store > Tap your Apple ID, and choose sign out
5) Tap Settings
6) Tap General
7) Tap Reset
8) Tap Network Settings
Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again.
Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7.
Otherwise I'm having a little success with this. Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all). So far it has been a very lengthy, iterative process.

Can't get iWork 09 functional after clean install...

Can't get iWork 09 functional after clean install. Could use migration assistant and restore from TM, but don't want to bring all apps...just iWork suite. Original purchased iWork via a trial download, then paid for license. Here is my error message when trying to open Pages:
Process:         Pages [2838]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [173]
Date/Time:       2013-01-18 19:59:57.810 -0600
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          62361 sec
Crashes Since Last Report:           13
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      33AE1986-2E77-4022-B824-C159014BAFF2
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0xefdffb com.apple.sfcompatibility (1.0 - 0.0.1d1) <2237C99F-3144-0918-47A2-403A125BA9D0> /Library/Application Support/iWork '09/*/SFCompatibility.framework/Versions/A/SFCompatibility
0x15e6000 - 0x15ffff7 com.apple.Keynote.sfstyles (1.0 - 1.0) <25A20E06-8C1E-1BD9-7F0C-8B4027676DFD> /Library/Application Support/iWork '09/*/SFStyles.framework/Versions/A/SFStyles
0x1610000 - 0x1acbfeb com.apple.SFTabular (1.0 - 1.0) <BB41B4DC-2F8E-B7E3-6274-7A92437B8FF4> /Library/Application Support/iWork '09/*/SFTabular.framework/Versions/A/SFTabular
0x1c8b000 - 0x1d45ff3 com.apple.Keynote.sfutility (1.0 - 0.0.1d1) <ED93C91F-C30E-541E-BDD3-04A25579EAFB> /Library/Application Support/iWork '09/*/SFUtility.framework/Versions/A/SFUtility
0x1db7000 - 0x1f48ff3 com.apple.Keynote.sfdrawables (2.0 - 2.0) <7D531D66-A640-D293-817E-6D5C8D15E26D> /Library/Application Support/iWork '09/*/SFDrawables.framework/Versions/A/SFDrawables
0x2005000 - 0x2278fef com.apple.Keynote.SFWordProcessing (1.0 - 20030221_1) <F7952C77-8CF1-30F4-7FA7-A3A45FA2E184> /Library/Application Support/iWork '09/*/SFWordProcessing.framework/Versions/A/SFWordProcessing
0x2397000 - 0x23e2ff7 com.apple.Keynote.SFControls (1.0 - 20030306_1) <37F86C48-E752-688E-9A75-3F4D3BA5C054> /Library/Application Support/iWork '09/*/SFControls.framework/Versions/A/SFControls
0x240f000 - 0x2468ff7 com.apple.Keynote.sfarchiving (1.0 - 0.0.1d1) <E489EE3A-D0D0-749C-E38B-C9E87AA2BEE3> /Library/Application Support/iWork '09/*/SFArchiving.framework/Versions/A/SFArchiving
0x249a000 - 0x25a8fef com.apple.Keynote.sfrendering (1.0 - 1.0) <A817A67F-149D-85C4-4625-5DB753E8A4FF> /Library/Application Support/iWork '09/*/SFRendering.framework/Versions/A/SFRendering
0x260a000 - 0x2692fff com.apple.Keynote.proofreader (0 - 1) <6442D80E-854E-F13A-0C69-AFF7F7D927F7> /Library/Application Support/iWork '09/*/SFProofReader.framework/Versions/A/SFProofReader
0x26a0000 - 0x275afef com.apple.Keynote.sfinspectors (1.0 - 1.0) <B9BB5F5B-F7CE-8F1A-F308-43A11E6617A5> /Library/Application Support/iWork '09/*/SFInspectors.framework/Versions/A/SFInspectors
0x27b6000 - 0x2b20ff7 com.apple.Keynote.sfcharts (2.0 - 2.0) <0A1A116C-2AE2-7C65-E93B-1A54B1153626> /Library/Application Support/iWork '09/*/SFCharts.framework/Versions/A/SFCharts
0x2d52000 - 0x2d97fe7 com.apple.Keynote.SFAnimation (1.0 - 0.0.1d1) <057D09D4-072E-995E-D3D0-42D1E0AAC07C> /Library/Application Support/iWork '09/*/SFAnimation.framework/Versions/A/SFAnimation
0x2dc2000 - 0x2decfe3 com.apple.Keynote.sflicense (1.0 - 0.0.1d1) <6399F656-7AD7-1357-F477-CB6128248032> /Library/Application Support/iWork '09/*/SFLicense.framework/Versions/A/SFLicense
0x8fe6e000 - 0x8fea0aa7 dyld (195.6 - ???) <60FD3471-A1D7-342E-99A7-3EDECDAEC6EC> /usr/lib/dyld
0x91f32000 - 0x921e4ff7 com.apple.AddressBook.framework (6.1.3 - 1091) <B8CC707C-6368-3CDD-BE38-D2335B7CC2DE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x928f0000 - 0x928f0ff0 com.apple.ApplicationServices (41 - 41) <C48EF6B2-ABF9-35BD-A07A-A38EC0008294> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x95317000 - 0x95396ff7 com.apple.iLifeMediaBrowser (2.6.4 - 502.4.5) <5C10CC72-586E-3497-9873-A0ACFB6156C3> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x95fe4000 - 0x96a79ff6 com.apple.AppKit (6.7.5 - 1138.51) <B9D3DCA0-9765-354E-9730-75A45A97DDFD> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x972ab000 - 0x972f3ff7 com.apple.SystemConfiguration (1.11.3 - 1.11) <C8DE66D7-0880-3F5F-A4BA-215B52DEFC74> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x97c14000 - 0x97debfe7 com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x98162000 - 0x9846cff3 com.apple.Foundation (6.7.2 - 833.25) <4C52ED74-A1FD-3087-A2E1-035AB3CF9610> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x999db000 - 0x999dbfff com.apple.Carbon (153 - 153) <6CB9BB2F-2707-3B9D-8F3F-0BFEEDE96494> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9a61b000 - 0x9a629fff com.apple.opengl (1.8.1 - 1.8.1) <766AFB12-A2CB-3A55-B662-FC9FFCAE0008> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.06 GHz, 4 GB, SMC 1.64f5
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-40V6A0, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0201, 0xfd130000 / 5
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6361, 0xfd133000 / 10
USB Device: DYMO LabelWriter 400 Turbo, 0x0922 (Dymo Corporation), 0x001a, 0xfd131000 / 9
USB Device: USB 2.0 Hub, 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0xfd137000 / 8
USB Device: PTZ-431W, 0x056a (WACOM Co., Ltd.), 0x00b7, 0xfd132000 / 7
USB Device: composite_device, 0x04f9 (Brother International Corporation), 0x01e5, 0xfd134000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: UPS CP1000AVRLCD, 0x0764 (Cyber Power Systems, Inc.), 0x0501, 0xfa140000 / 6
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa132000 / 7
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 9
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
FireWire Device: OneTouch III, Maxtor, 400mbit_speed
FireWire Device: HDD, Iomega, 400mbit_speed
FireWire Device: My Book 111D, WD, 800mbit_speed

You didn't save the iWork trial.dmg somewhere by any chance?
You have not move enough parts of iWork over to the new computer. There are files in
Users > your name > Library > Application support > iWork. Get the iWork folder
MacHD > Library > Application Support > iWork '09. Get the folder
To get into the users Library you have to on Mountain Lion in the Finder click on Go in the menu while pressing down the Option key.

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?

Can't Synq iPhone 3GS Calendars after installing iOS6, any suggestions?
I'm all mac-based and followed the instructions for the upgrade to iOS6 software for iPhone but now my calendars won't synq. When I connect to iTunes and run the synq process, it gets stuck on the Calendar step and will not finish the synq process. I have to either wait for it to quit or force it to quit. Additionally, when I try to log a new event or meeting onto the Calendar on the iPhone, it will lock up and quit the app. I then have to shut down the iPhone to get it to open again but it just locks up again when I try to log a new event. Any suggestions? I'm tempted to do a back up and reinstall but don't want to risk any data loss.

Hi there,
I am using Rogers, which does support tethering.
The iPhone does not show up in the list of devices in the Bluetooth preference panel. It fails at the Pairing step of the Bluetooth setup assistant.
Cheers!

I just bought quicktime pro and can't get it to show up in my system preferences.

i just bought quicktime pro and can't get it to show up in my system preferences. Any ideas?

Welcome to the Apple Support Communities
QuickTime only appears on System Preferences if you are running Mac OS X Leopard, and you have OS X Mountain Lion.
In Mac OS X Snow Leopard and newer, QuickTime Player 7 isn't included, so you have to install it before getting QuickTime 7 Pro > http://support.apple.com/kb/ht3678
After installing QuickTime Player 7, you have to activate it in order to get QuickTime 7 Pro. In that link, follow the steps under "Information for QuickTime 7 Pro users"

Can't get printers to show after installing 10.5.6

Similar Messages

Maybe you are looking for