Can't get public wi-fi
A new problem: I can no longer connect to coffee shop wi-fi (eg.: Starbucks) using my new iPod Touch (5th gen). I'm fine in a private home when given the password but in the coffee shops the iPod "sees" the network and checks it off but doesn't connect. The log in page never shows up. Any thoughts?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Similar Messages
-
How can I get help for ADE downloads from the public library. I am suddenly getting error messages
How can I get help for ADE downloads from the public library. It worked for years and now I am getting error messages. I cannot find any practical help
If you are trying to open the book on a device, try using the latest DL Reader on Android and iOS
https://play.google.com/store/apps/details?id=com.datalogics.dlreader&hl=en -
. Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem with some **** on an iPod and I am to knowledgeble about the ipod...thanks
You're not confusing this with a shared Photo Stream...?
Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
iCloud: Change your iCloud account password
If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
It is not necessary to change your Apple ID unless it is an email address you no longer wish to use. -
I can't get my pictures into the public folder on the iPad 3. Can anyone walk me through the steps?
I can't get my pictures into the public folder on the iPad 3. Can someone walk me through the steps?
Ok, I'll give it a try.
Presuming you already have a Dropbox account, and you have the app on your pad.
Open the app, navigate to public folder. Touch the upload icon at the bottom. It will show you everything you have already uploaded. To upload a new picture, then touch the plus sign at the top right. You can create one or more subfolders to organize it however you want.
Hit the plus sign again if needed, and the photo listing will show up. Find the photos you want and mark them by touching them. Then touch the blue word upload in the upper right.
( the directions assume the pad is in the landscape mode.)
That's really all there is to it. As I typed this I opened and uploaded a couple of pics to get the steps right. -
How can i get list of Session Ids or SessionObjects present in appl server
hi,
i want to explicitly kill the sessions of the logged in persons from an application server instead of we waiting for the server to invalidate them once their time is out.
can i get the list of all the session object avaliable in the sever at that perticular moment?
regards
sowjanyaHi!
1.getIds() in javax.servlet.http.HttpSessionContext
can be used but it is Deprecated.
2.getIds() in javax.net.ssl.SSLSessionContext
Returns an Enumeration of all session id's (you cant use this in this case)
also in weblogic(BEA)change request No: CRS 45879 and 47878:
supports methods like:
public static boolean invalidateAll(HttpServletRequest req);
check out there.
Thanks,
Ramu -
What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files. -
We can't get to the camera roll right now
I have a dell Latitude 10 table with Windows 8.1 RT. Last week I decided to unload all the pictures from the camera roll to my PC and I did it without a problem, but in the process I removed the camera roll folder under the public pictures library. Since
then, the camera app is not working and it gives me the following message: "We can't get to the camera roll right now". I've re-created the folder, set the default save location and public save locations to the Public Pictures folder but the error
keeps popping up every time I open the camera application. If I try to shoot a photo or a video it tells me that it couldn't be saved. How do I set the camera app to use the new folder?I had the same Problem, and all experts could not help. I even dowloaded tools that say thy would fix the problem. Anyway as a matter of fact it still is a computer, no magic.
I found a way: Open regedit, search for "User Shell Folders".
Then check all the directories.
In my case one of the directories refered to the one I deleted. I just changed it and restarted my computer.
On my iconia it saves into this key:
I changed it | Keep the Name of the folder "Camera Roll" depending on your language it will rename the folder in the Explorer library automaticly. (in Germany to Eigene Aufnahmen)
{AB5FB87B-7CE2-4F83-915D-550846C9537B}
D:\backup pics\Camera Roll -
How can I get iTunes to display the tracks from a CD in their original (album) order?
To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham -
How can i get a array from a JSP ?
Hi all,
i have a STORED PROCEDURE like this:
static public void getMyArray(double [] xx) {
for (int i=0; i<myarr.length;i++){
myarr=3.145*i;
xx=myarr;
return ;
how can i get the array with XSQL and transform with a XSL ?
Is this at all possible?
Thanks for any help.
Achimu r asking how ca u get array from jsp?
and u r asking xsql ...some stuff i couldnot understand .can u repeat the question properly?
null -
How can i get a component from frame?
how can i get a JTextField component from the frame?
in my program i use button and text fields, when button is pressed the action listener performs the needed actions: it must take the values in the text fields and do something with them,
for example i have a button - view:
look at the comments
public class _ActionListener_search implements ActionListener {
private JFrame frame;
private database dtbs;
public _ActionListener_search(JFrame frame, database dtbs) {
this.frame = frame;
this.dtbs = dtbs;
@Override
public void actionPerformed(ActionEvent arg0) {
if (arg0.getActionCommand().equals("view_person"))
//HERE i want to get values from text fields!
//i need to get JTextField component from frame and use it
view.addActionListener(new _ActionListener_search(frame, dtbs));how can i do it?
is this a correct way?Encephalopathic wrote:
If you know that you're going to need the data held in them why not give the class that holds them a public method that returns the Strings that they hold.
public String getTextFieldXyzText()
return textFieldXyz.getText();
}Then if your actionlistener has a reference to this class's object, it can simply call the above method.That's what I was thinking. The view has a method getXyzText() and the listener (or some larger, enclosing controller) knows the view.
What I would get away from is a single, switch-board listener hooked to a 100 unrelated buttons. -
How can I get values from listbox?
Hi all,
I need to get price values from Price List (Inventory -> Item Master Data screen). It's important to get values from field 'Price' BEFORE item will be added/updated.
How can I get values from Pricelist listbox?
Thanks for any suggestions or short sample code.
Best regards,
AndyHi Andy
Here is som sample code that will get the description of the price list and also the price that is displaying at the time. The item master must be open for this snippet of code
Public Sub GetItemPriceFromOpenWindow()
'this is assuming item master is open
Dim oEdit As SAPbouiCOM.EditText
oEdit = SBO_Application.Forms.GetForm("150", 1).Items.Item("34").Specific
SBO_Application.MessageBox(oEdit.Value)
Dim oCmb As SAPbouiCOM.ComboBox
oCmb = SBO_Application.Forms.GetForm("150", 1).Items.Item("24").Specific
SBO_Application.MessageBox(oCmb.Selected.Description)
End Sub
Hope it helps -
How can I get the "text" field from the actionEvent.getSource() ?
I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
public static void main( String[] args ) {
JFrame f = new JFrame("JFrame");
f.setSize( 500, 500 );
ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
buttonsArr.add( new JButton( "first" ) );
buttonsArr.add( new JButton( "second" ) );
buttonsArr.add( new JButton( "third" ) );
MyListener myListener = new MyListener();
( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
JPanel panel = new JPanel();
panel.add( buttonsArr.get( 0 ) );
panel.add( buttonsArr.get( 1 ) );
panel.add( buttonsArr.get( 2 ) );
f.getContentPane().add( BorderLayout.CENTER, panel );
f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
f.setVisible( true );
public static class MyListener implements ActionListener{
public MyListener() {}
public void actionPerformed( ActionEvent e ) {
System.out.println( "hi!! " + e.getSource() );
// I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button). -
How can I get the context-parm from a web.xml file using struts?
Hello:
I need get the context-param from the web.xml file of my web project using struts. I want configurate the jdbc datasource connection pooling here. For example:
<context-param>
<param-name>datasource</param-name>
<param-value>jdbc/formacion</param-value>
<description>Jdbc datasource</description>
</context-param>
and then from any Action class get this parameter.
Similar using a simple server can be:
/** Initiates new XServlet */
public void init(ServletConfig config) throws ServletException {
for (Enumeration e = config.getInitParameterNames(); e.hasMoreElements();) {
System.out.println(e.nextElement());
super.init(config);
String str = config.getInitParameter("datasource");
System.out.println(str);
public void doPost(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException {
// res.setContentType( );
System.out.println("Got post request in XServlet");
PrintWriter out = res.getWriter();
out.println("nada");
out.flush();
out.close();
but only this works for init-params, if I use
<servlet>
<servlet-name>MyServlet</servlet-name>
<display-name>MyServlet</display-name>
<servlet-class>myExamples.servlet.MyServlet</servlet-class>
<init-param>
<param-name>datasource</param-name>
<param-value>jdbc/formacion</param-value>
</init-param>
</servlet>
inside my web.xml. I need something similar, but using struts inside the action class for that I can get the context-params and call my database.
Thank youTo get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
ServletContext context = getServlet().getServletContext();
String tempContextVar =
context.getInitParameter("<your context param >"); -
I got this error while trying to install itunes can anyone help me, I am without itunes on my computer and can't get it to install same error everytime.
an error occued during the installation of assembly policy 8.0 Microsoft. VC80.CRT. type="win32.policy".version="8.0.50727.6195" public KeyToken="1fc86369a1e18e36" processor Artechiture=:x86"' please refer to Help and Support for more information. HRESIT:ox
there maybe more to the error but thats all I could read.
HELP ME PLEASE
DonCloud with down arrow icon should allow for download, if not...
Try turning iphone off, then back on. If not, try resetting. Hold home and power button approx 10 seconds until apple appears. Back to app store and click search and look in purchased apps, or just search for your app. Should be able to download, unless it was pulled from the app store, and no longer sold. -
Can't get printer to work (Windows - Arch)
I have an XP box and my Arch box on my home network, have Lexmark X1100 connected to XP box (USB printer). It worked fine on Ubuntu, I know it can work but I haven't gotten anything going using the Arch wiki on CUPS. Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
printing = cups
printer = x125
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
And I followed this: http://wiki.archlinux.org/index.php/CUPS specifically http://wiki.archlinux.org/index.php/CUP … rinter_PPD and http://wiki.archlinux.org/index.php/CUP … s_to_Linux. But I run OO and I still only have Generic printer.
I was using the Gnome cups manager on Ubuntu, but I cannot find this package on my system now. I see it in AUR but shouldn't it be in pacman? I have searched and searched but can't find it. And I installed gtklp, but upon startup it just gives me "No printers found!" and exits.
EDIT: I have just built gnome-cups-manager from AUR and am at the point where I select a driver, however in the Manufacturer list there is nothing showing, and when I hit Install Driver and select the .ppd I got from the CUPS site for my printer, it just says "The PPD /usr/share/cups/model/Lexmark-X125-drv_x125.ppd is already installed" I can't get past this point??
Last edited by colbert (2008-01-09 17:34:32)on xp box
1) install and start lpd daemon (done)
2) set printer sharing (short name, no spaces) (done)
3) make sure that xp allows tcp 515 (done?)
on linux
1) start cups
2) open konqueror (not firefox) and enter in the address bar
http://localhost:631/
log in as root (I assume that basic cups with user is configured)
3)select add printer
- first page:set priter description
- second page: Select device lpd/lpr host or printer
- third page enter lpd://hostname/queue (hostname if defined in /etc/hosts, otherwise ip address of XP box queue -> printer share name
- fourth page select manufacturer
-fifthpage driver
test it
KDE
K Menu -> Settings ->Printers ->Add -> follow screens
I found KDE method (under Arch) more reliable, but both should work. No idea about Gnome.
next
Last edited by broch (2008-01-10 01:15:24)
Maybe you are looking for
-
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes se
-
Hiding old apps from showing in App store?
Using a Mac, I'm logged into iTunes and looking at purchased apps from a few years back on my iPhone 4 and iPad2 that I want to hide from being shown on my new Air2. I do not see a way to delete the apps or hide them. How is this done? Thanks.
-
HP 5550 problems printing in color.
I bought a new iMac this past summer and have recently installed Lion. I also just bought, after a long delay, a new color cartridge for my HP 5550 DeskJet printer. The printer works fine, with one exception... it does not want to print in color.
-
How install Solaris 2.5.1 and Windows Together
Hi, We�ve a registered copy of Solaris 2.5.1 and we can�t install solaris and windows in the same Hard disk. I�ve been trying since two weeks. I can�t found a document that help me with this task. Please, help me with the directions to do that or try
-
Hello, I'm trying to make a fixed layout epub and all goes well until page 141. The book does anyone know you because Jan 400 pages, but do not let me export more than 141. Does anyone know why this happen?