Can't get Quicktime 7 to work after restore hard drive

I had to reformat and reinstall windows XP home. Everything works fine but I can't apply my license key to Quicktime Pro 7.
When I enter the license key from the Email I received it says invalid registration. I still have the receipt and order number as well as the key sent to me at purchase in Oct,05 (8 months ago).
Why won't this key let me register the product??????? It works fine as the FREE version but says my purchase is not vaid.

Use copy/paste from the email to the registrations fields.
Too easy to enter an O where a zero is used. The name must match too including a salutation (if used in the email).

Similar Messages

How can i get back my purchased items after a hard drive and iphone failure?

My itunes was loaded on my parents computer and the hard drive crashed. I didnt get round to backing up to my laptop and then my iphone crashed and removed everything. How can i get back my purchased items?

Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I get my printer to work after a Yosemite update?

How can I get my printer to work after a Yosemite update?

Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W.

I can't get my iMessage to work after changing Apple ID passsword

How can I get my iMessage to work after changing my apple password?

Well did you change the apple id in imessage?
settings - message - add your new id and delete the old id.
Or turn off imessage and then back on to reactivate with your new id.

Can't get computer to see galaxy note 3 hard drive?

can't get computer to see galaxy note 3 hard drive?

One last thing to add into the mix.
As you know your Router will have to probably need to be manually confiqured.
Your Router has an IP address of 192.168.1.1
The 1st port to the first machine should have an IP of 192.168.1.2
The 2nd port should have 192.168.1.3
Each corresponding port needs to have assending IP addresses.
Checking the paperwork that came with your Router will explain how to manually confiqure it.
Sometimes a complete System reset will also help.
Modem Router and Shutting off all the machines.
When powering back up start with your ISP's Modem and after it has aquired the signal and lights then you can power back your Router, and the same there wait for it to reacquire the signal and the lights each will take a minute each. Now you can restart your computers one at a time and try them. You might want to double check the cable on your troubled machine and also try switching the ports on the router and if none of this works it sounds like a bad Ethernet Card.
Don

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't get Nokia Conversation to work after I updat...

Hi!
Why can't I get Nokia Conversations to work after i updated my N86 to the latest FW?
Is it that Ovi Contacts client that is blocking it?
What is the name of Ovi Contacts in the installed aplication list?
Thanks!..
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Welcome to the Adobe Forums.
To better assist you with this issue we need to know:
What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)
Are you seeing any error messages?
Can you provide screenshots of the error messages (if applicable)?

I can't get the connect to work after base installion.

Hello, everyone, I am new to Arch Linux.
I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
Every thing seem make sense to me during the installation, but I just can't get the network connection working.
BTW: my laptop is a Toshiba portege M100.
Any idea?
Thanks
Last edited by ioky (2008-06-25 06:18:58)

Try typing in:
dhcpcd eth0 (or whatever interface you are using)
and hit enter, I had the same type of problem and this woke up my network connection.
Edit: Also, once you gain your connection up and running, you might want to install ifplugd. It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops. Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
Last edited by ArchGentoo (2008-06-26 01:22:45)

Screen not working after new hard drive installed

Hi,
Can anyone help me, I just replaced my hard drive on my 15" G4 Aluminum Power Book as it had crashed and died on me. When I finished installing the new hard drive, when switching it on the screen remains blank. Does anyone have any Ideas why and how to get it working again. The screen was working before the hard drive crash. Any help will be much appreciated.
Thanks
Robby

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I can not get my mouse to work after changing the batteries

I can not get my wireless mouse to work after changing the batteries

Some ‘dumb’ questions just so we don’t assume what you have done:
Batteries installed with both + poles pointing to the top as you hold the mouse?
Mouse switch has been returned to the ‘on’ position - do you see a green light? First it will be solid green and then flashing green as the mouse tries to pair with the computer.
Try clicking the mouse a few times as it’s trying to pair.
If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries. If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

I can't get my bluetooth to work after upgrading my iphone 4 to ios 6

After I upgraded my iphone 4 to IOS 6, i can't get any of my bluetooth connections to work. Both my headset and my car are not recognized. I validated that Bluetooth is on in the configuration, but it just keeps searching for devices and never recognizes them. Is there a setting I'm missing?

What does the manual say on the wireless speaker on how to connect to other devices?

Can't get Fn keys to work after Windows 7 install

I have completed the Windows 7 install but can't get the Fn buttons to work. I have found and installed the 'flash cards' which seems to do a similar thing but would like the proper Fn button as well.
Does anyone know which of the drivers does this?
thanks,
Tim.

Hi
Hardware FN keys doesn't work in Vista or Seven even if you had TVAP installed.
You can use the Key via Flash cards, to do that you need to open flash card
settings and select "allow to show flash cards on mous over" (or someting similar).
Now you can use the functions of flash cards, but you can't use it via key, i'll hope with the new relase of TVAP could fix that problem.

How can I get my photo and notes after restore

How can I get my photo and notes back after restoring an i phone?

Had you backed up your stuff to iCloud or iTunes?

How to get things working after External Hard Drive Died

I had all of my iMovie videos (about 800 GB) on an external drive that died. Fortunately it was backed up to another external drive using Time Machine. I bought a new drive and couldn't figure out how to restore using Time Machine so i transfered the files manually using Finder. The transfer was successful, but now the movies do not appear in the iMovie event library. How do I get iMovie to work with the new external hard drive. The drive itself appears in the Event Library window, but none of the movies do. Then I also need to figure out how to back up the movies again to Time Machine. When it looks to do it now, it wants to duplicate the moveis which exceeds the Time Machine hard drive capacity (2TB). Thanks!!

For you to see them in iMovie, the Events need to be in a folder called iMovie Events. This folder must be at the top level of the drive.
Move it there and restart iMovie, and you should see them.

How do I get my quicktime to play movies after my hard drive was accidently removed?

I accidently removed my hard drive when playing a video from it and all of a sudden now I cannot play any videos from the hard drive or my computer using the quicktime player! I have an older mac with OS X 10.4 I do not know if that is relevant? I tried to play another video from my hard drive and computer and it is not working either! I am really upset as I have a lot of home videos from trips etc that I hope have not been damaged from the removal of the external hard drive.

It is also saying when I try to play videos from my computer that there is a I/O error. When I try to play movies from the hard drive it is saying 'This file is not a movie file."

Can't get Quicktime 7 to work after restore hard drive

Similar Messages

Maybe you are looking for