Can't get reminders to work after ios7

Have tried much advice from posts, articles, etc. online and have changed multiple settings with reminders, icloud, etc. Got them to work again after first 7 update but then lost after next update and haven't been able to fix since. I've tried every suggestion I've seen short of resetting phone. (phone=4s)

Is your broadband Internet connection quality good enough to handle the additional load of a network extender along with your regular Internet traffic?

Similar Messages

Can't get it to work after 3 of them

I have had 3 of them I have the 3rd one here at my house but still can't get it to work. not sure what I am doing wrong. My sister has one and can't under stand why it will not work for me,. I really need one the service is not really good here.

Is your broadband Internet connection quality good enough to handle the additional load of a network extender along with your regular Internet traffic?

Can't get iphoto to work after tampering with library in Finder

I think I made a big mistake when I tampered with the iphoto library in Pictures in Finder.
Now I can't get iphoto to work. All the pictures are gone in iphoto, the spaces are there but they are blank.
When I open iphoto it goes into the mode (little spinning wheel appears) where I have to "force quit".
Any supggestions on what I can do? Thanks.

The list that shows is just data files and such.
You can burn the entire iPhoto Library folder.
You can burn each Year folder or any other variation.
This is my workflow. The reason I do it the way I describe is because I want a backup of just the photos and video clips I take so I can copy them to a partition of my external drive and burn them to disc. On the other partition I backup my entire users folder
When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
Here is info on backing up your photos:
Backing up your iPhoto Library
1. Burn the iPhoto Library folder in the Finder to a CD or DVD
This method will give you a burned iPhoto Library folder that can be copied back to your computer to replace a damaged library. You can also use this method to backup an old library when you want to create a new Library to use as your current library.
insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use a DVD and a SuperDrive-equipped Mac
The easiest way to burn an iPhoto Library folder in the Finder that is larger than 4.7 gig to fit on one DVD is to burn sections of the folder.
Drag the iPhoto Library folder to the desktop
Double click the folder to open it.
Drag each Year folder to the desktop.
You should be left with the iPhoto Library folder containing all the data files, and the Year folders.
Combine whatever year folders that amount closest to a DVD burn size on one DVD. Make sure that you have burned all the Year folders, then the iPhoto Library folder with all the data files.
If you ever need to use this backup, insert the DVDs into your computer and copy the folders to the desktop. Put all the Year folders back into the iPhoto Library folder. Then put the iPhoto Library folder back into the Pictures folder.
You can also check out applications for disc spanning:
Disc-spanning software
DropDMG
Toast
Dragon Burn 4
BackityMac
Retrospect Express-comes with some external drives
Retrospect for Macintosh Desktop Edition
2. Copy the ENTIRE iPhoto Library to an external drive formated for a Mac. Do not use this as your only back up as the external can also go bad.
3. Copy the ENTIRE iPhoto Library to your iPod in disk mode
4.Creating your own CDs and DVDs for viewing in iPhoto
This method is a great way to back up Albums of older photos or even your entire library if it is small enough to fit on a DVD. This method will give you a library that will mount within iPhoto in the source column to be viewed. To import any images from this library they need to be dragged into your library in the source column.
If you just want to backup the images in your library:
1) Within iPhoto select the images, albums or rolls you want to backup. Go to Share>Export and export them to a newly created folder on the desktop. Follow the directions in the next link.
Creating a CD or DVD to be viewed in Windows or by a photo processing company
1.. If you backed up the entire iPhoto Library by burning within iPhoto or burning the folder in the Finder, make sure the burned copy is a good working copy before you delete the iPhoto Library folder in the Finder. You delete the iPhoto Library in the finder by dragging it to the trash when iPhoto is closed. When you next launch iPhoto it will create a new empty library for you to start anew.
2. If you burned just the images, be aware that that is all you are archiving. No metadata will travel with the images such as comments, keywords, etc.
You can then delete those images within iPhoto by highlighting them and hitting the delete key, then empty iPhoto's trash. Do this often and in groups so iPhoto will not choke on too many images.

I can not get wifi to work after installing new hard drive...

I have a a505-s6965 laptop running vista and I had to replace the hard drive. After doing so and running all of the recovery discs I keep getting an error message about my wifi driver and card reader and also a couple others. Now my computer works but I can not get online even if I do not use wifi. PLEASE HELP!!!
Solved!
Go to Solution.

I've enabled your account ID for searching the general drivers and support pages for specific downloads based on entered model number and descriptions.
The web site search feature is an experimental unsupported BETA currently in its 27th year of testing. The hidden link that is only usuable by yourself and everyone else is:
http://support.toshiba.com/drivers
I've also removed all age verification checks for your account so you won't be challenged for proof of minimum age or style when searching the free web site of drivers available to anyone else and yourself.
Please notice that your search and downloads have been enabled for high speed acceleration and could likely be completed in less time than any unimaginative and ignored response you'll struggle with disguised as your return fire.
I love your user ID, you must remember to bequeath it to me in your expansive trillion dollar estate plan.
"hello, hello, IS THIS THING ON ?!?!!??!!! --Mr. Tinkles "

Can't get speakers to work after using ear buds what happened?

I used ear buds once and now I can't get my internal speakers to work. In "system preferences" sound output I can't select internal speakers. it just has "digital out"

No, but I thought I saw it at an earlier time and of course with the headphones connected I can hear audio. By the way, thanks for replying.
Chuck

Can't get yosemite to working after waking from sleep mode

I just installed Yosemite to my Mac Mini. When the computer goers to sleep for more then 30 seconds I can wake the computer but then after i see the desktop I can't do anything on the computer every click i make does not respond and I have to force the computer to shut down and I have to reboot every time my computer goes to sleep.

I have the exact same issue for the first time after installing Yosemite. On resume from sleep, I can see the desktop, and can move the cursor with the mouse, but clicking on icons, etc. does nothing, and the keyboard does nothing. A cold boot works fine. This is a Mac Mini bought in the Summer of 2014. I run no unusual software. I have eliminated all log in items in Preferences/Accounts, reset the NPRAM, have no peripherals (other than standard Apple mini mouse and wireless keyboard), and have shutdown and unplugged to reset. It makes no difference whether a password is required or not - once it goes to sleep, this is the result, and only a forced shut-down by holding the power button and a cold boot give me control back. This problem does not appear if it merely goes into screensaver mode - which I invoke with a hot corner.

Can't get tab to work after a click box

I have no problem getting the tab to work after a text entry but when I insert a click box and tab the tab feature isn't working. I do have tab set as short cut in Actions on properties of click box.

Captivate 7 allows you to configure the tab order for all interactive objects on a slide.
Select the slide and look for the Tab Order button at the top of the Properties tab.

How can I get my phone working after water ingress

Help..... My phone just went into the toilet basin...
It didn't get very wet because of the cover I use, but it still had a dunking..
Right, when I re-set the phone using on/off key top, I get the blackberry name and a white screen, after about 20 seconds this then fades away to leave just the white screen.
Now the red led is flashing and the blackberry name appears for maybe 2 seconds then goes again...
Is there anything I can do to help my phone work again.
How can I dry the phone out so that it will work again?
Any help appreciated. Thanks...
Solved!
Go to Solution.

My suggestion read a book when you go instead. ;-)
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Can't get ET to work after building from AUR

I have downloaded Enemy Territory tar from AUR and am trying to build it, here is what I am getting:
bobby@dabox:~/installs/enemy-territory$ ls
enemy-territory.desktop et-ded et-pbupdate.sh PKGBUILD
enemy-territory.install etded.sh et.sh
bobby@dabox:~/installs/enemy-territory$ makepkg
==> Entering fakeroot environment
==> Making package: enemy-territory 2.60b-8 (Tue Jan 8 14:44:27 EST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading et-linux-2.60.x86.run
--14:44:28-- http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
=> `et-linux-2.60.x86.run'
Resolving ftp.games.skynet.be... 195.238.1.6
Connecting to ftp.games.skynet.be|195.238.1.6|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 270,965,248 (258M) [text/plain]
89% [============================================> ] 241,461,216 458.72K/s ETA 01:03^100%[==================================================>] 270,965,248 467.87K/s ETA 00:00
14:54:12 (453.47 KB/s) - `et-linux-2.60.x86.run' saved [270965248/270965248]
-> Downloading ET-2.60b.zip
--14:54:15-- http://ftp.gwdg.de/pub/misc/ftp.idsoftware.com/idstuff/et/ET-2.60b.zip
=> `ET-2.60b.zip'
Resolving ftp.gwdg.de... 134.76.12.3
Connecting to ftp.gwdg.de|134.76.12.3|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4,143,401 (4.0M) [application/zip]
100%[==================================================>] 4,143,401 326.94K/s ETA 00:00
14:54:36 (201.11 KB/s) - `ET-2.60b.zip' saved [4143401/4143401]
-> Found enemy-territory.desktop in build dir
-> Found et-ded in build dir
-> Found et-pbupdate.sh in build dir
-> Found et.sh in build dir
-> Found etded.sh in build dir
==> Validating source files with md5sums
et-linux-2.60.x86.run ... Passed
ET-2.60b.zip ... Passed
enemy-territory.desktop ... Passed
et-ded ... Passed
et-pbupdate.sh ... Passed
et.sh ... Passed
etded.sh ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory enemy-territory
Verifying archive integrity... All good.
Uncompressing Enemy Territory 2.60 Full Install..............................................................................................................................................................................................................................................................................................................................
[b]cp: cannot stat `Enemy Territory 2.60b/linux/et.x86': No such file or directory
cp: cannot stat `Enemy Territory 2.60b/linux/etded.x86': No such file or directory[/b]
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .FILELIST file...
==> Generating .PKGINFO file...
==> Copying install script...
==> Compressing package...
==> Finished making: enemy-territory (Tue Ja
I have bolded those 2 lines as when I try to run enemy-territory after finishing, I keep getting this:
bobby@dabox:~$ enemy-territory
/usr/bin/enemy-territory: line 6: /opt/enemy-territory/et.x86: No such file or directory
/usr/bin/enemy-territory: line 6: exec: /opt/enemy-territory/et.x86: cannot execute: No such file or directory
bobby@dabox:~$

colbert wrote:So this cannot work since it is trying to use a .zip? But others have gotten this to work, I don't understand?
It was caused by the upgrade of the file package.

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Can't get apps to work after ios5 update

After doing the update for ios5, i noticed i can't open apps i have installed on my ipad2. the apps are still there but when i click on facebook app for example the fb icon shows it being clicked on but nothing comes up. this is the same for all other apps i have installed before the update. safari works just fine but not the apps. any ideas what is causing this or how to fix it?

Users have reported this problem after previous major updates (IOS4).
Q: Did the update complete successfully? You would have been asked to set Location, iCloud, etc.
is it ALL apps, or just 3rd party apps? Safari is working.
Try a resync with iTunes.
Try reinstalling one 3rd party app. In the past, just reinstalling one seemed to fire up the others for users who had this problem.

Can't get eth0 to work after fresh install .

I just finished installing Arch; everything went well, with the exception of Networking .
When booting into the new system and logging in as root, I did ping www.google.com and the output was like 70+ tries at receiving data from google, although it did manage to find out gogole's IP address .
This is my Networking section, omitting the commented lines :
HOSTNAME="computer"
interface=eth0
address=
netmask=
gateway=
NETWORK_PERSIST="no"
*EDIT*
After posting this, I thought maybe I should try and see if pacman works, and I was able to properly -Syy and -Syu .
I also checked that "network" was in the rc.conf DAEMONS line .
ping still doesn't work, but I will try going on with the post-install configurations .
Last edited by AstarothMastemaRavenclaw (2011-06-20 20:32:37)

Mr.Elendig wrote:If you can use pacman, then maybe it's just a dns problem?
Try setting the dns server to 4.2.2.2
I was thinking that, except that he can look up the address of Google, the address of the mirror, and presumably is able to use tcp and udp to download packages based upon their URLS
I'm trying to figure out if something could be blocking ICMP packet echo requests.

Tecra S1 - Can't get sound to work after new installation

Hi,
I have a Tecra S1 and had to reformat. Didn't have orig driver CD.
All went well, installed drivers from Toshiba website. Soundmax driver for sound. But I am sure I can hear some reverb when playing music. VERY annoying.
I think that a sound environment preset must be turned on but I have looked EVERYWHERE and cannot find how to get into or adjust any sound environment presets.
HELP PLEASE!
Any help appreciated.
Pete

Nice job, buddy! :)
How did you fix this?

Can not get firefox to work after downloading 4 then going back to 3.6

Firefox had to reinstall adobe reader and now firefox will not open nothing works and 4 is just plan crap

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Re: Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

Fab,
Like you, I'm looking into using the LabVIEW C Generator for an embedded application.
I would be interested in your opinion of the LabVIEW C Generator. Also, roughly how much does it cost?
Regards,
Vito

Himura_Kenshin wrote:
Hi all,
I'm trying to compile the same generated code (from GCD.vi) but with a Keil µvision 4 ( the default target: Luminary).
I followed line by line the tutoriaI and i used the µvision project (example.uvproj) mentioned in the manual (edited under µvision2).
I have 0 errors but many warnings (35) divided on 3 main types:
warning: #177-D: variable " " was declared but never referenced
warning: #174-D: expression has no effect
warning: #68-D: integer conversion resulted in a change of sign
Have anyone encountered these warnings ?
I'm suspecting my µvision version... if anyone managed to compile the example under µvision 4 or 5 ?
Thank you
Best regards
We never got a reply from NI. I don't know if the bug I found got fixed after LabVIEW 2011.
Perhaps someone from NI can tell us if CAR##327027 was fixed and see if that is related to the issue Himura_Kenshin is seeing.
Regards,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Can't get reminders to work after ios7

Similar Messages

Maybe you are looking for