Can't get response from home button
Hello, My home button does not respond. I have reset numerous times to no avail. Is this a hardware problem?
It could be. My first iPhone 4 had this problem. I tried resetting, restoring etc but it turned out that it was a hardware fault.
Does the button feel a little soft? What I mean is, has it lost the typical 'click' feeling when you press it? That was what lead me to call Apple support for a new phone...
Apple replaced it for me no worries though.
Similar Messages
-
Can I get Iphone 4 Home Button fixed?
I dropped it in the toilet today...
everything works except the home button. some short circuit?
can i get only the home button fixed without getting a replacement. and about how much will it be?Apple does not fix devices. They do warranty and out of warranty exchanges.
Since you dropped the phone in the toilet, this would be an out of warranty exchange as water damage is not covered.
Out of Warranty exchange in the US is $199. -
I need some help - Can't get response from refurbished AP1232AG access points -
We purchased 4 Cisco-refurb AP1232AG access points, intending to use one as a router and the others as repeaters. We have ran AC power to locations for all of the routers, mounted them in outdoor NEMA boxes, added the lightning arrestors and attached 12db omni antennas. All of that process went well.
I'm trying to access the routers per instructions by cisco, which state that all refurbs are set to 10.0.0.1 and must be accessed using a console cable from computer com port to the unit's console port. We have the cable and have it set up in that manner. We have tried using telnet, serial and web sessions within the Indigo software and it states the unit is not responding. I've tried using the Cisco IPSU and get the same message that the unit won't respond. I can't ping it from the C drive as well. All of the routers respond similarly so I'm certain that it's my fault and not the APs.
Is there anyone who can take a minute to walk me through what I may or may not be doing correctly to access the APs and get them configured? I lack the requisite background to determine the problem on my own. I feel confident that I can configure them if I can get to them.
Any would be appreciated.
thanksHi rlrigsby0613 and welcome to the Cisco Home Community!
This product is being handled by the Cisco Small Business Support Community.
For future discussions about this product, go here.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router -
Can't get response from PayPal
I have been trying to make a purchase through nuts.com since Saturday. When the popup for PayPal comes up it won't let met past the choice of credit card - keeps coming back to the same page. I have called PayPal FOUR times and gotten no satisfaction. To begin with, I cannot understand the people who answer - they have accents and speak too fast - I am unable to really understand all they say - I keep asking them to slow down and speak up, but they won't. One of the reps tried to send my payment through but it would not go - she would not tell me what was wrong and told me to place my order with my credit card through the purchase site!!!!!!!!!!!!!!!!!! What an answer!! I have a subscription that is supposed to happen on the 6th of the month - I don't know if it will go through because no one will tell me what is going on with my account. There should not be any problem with anything - I have not been notified that there is a problem. HELP, help, please.......can someone help me - I cannot get anyone's help at PayPal!!!!!!!!!!!
Pavna:
Yes. I specified the URL as best as I know how. For my pc, named griot, I typed:
http://griot:7777
and
http://griot
The HTTP service starts, at lesat that is what Control Panel->Services indicate. I can stop the service and start it using Oracle HTTP Server->Start HTTP Server Powered by Apache. Because all indicates are that the HTTP server starts I am quite perplexed. I installed Oracle 9.0.2 using the standard install option. I did not install Custom. The install finished successfully.
alan -
Can't get playlists from one one computer to another. Confident Home Sharing is turned on correctly. Have imac and macbook Air and Lion. Using smart lists.
Using Ethernet, I am attempting to stream the movies on my computer to my girlfriends computer through iTunes home sharing. I want to watch the movies that are on one computer on another.
-
hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
Can't get my dropdown menu buttons to link to another scene.
I can’t get my dropdown menu buttons to link to other scenes within the same Flash file. The buttons are unresponsive during playback – as if no code were attached to it. Here’s what I have as my AS2 code on the dropped button that is supposed to link to the "Published" scene/page:
on(release){
_root.gotoAndPlay("published", 1);
I'm working with Actionscript 2.0 in Flash CS6.
Any help would be appreciated!
Thanks,
RobertHi kglab,
I do get these compile errors:
Scene=published, layer=Buttons, frame=1, Line 1 Statement must appear within on handler
Scene=published, layer=Buttons, frame=1, Line 2 Statement must appear within on handler
But, I think you are correct about the setInterval Loop. On the home scene I’ve created a movie symbol which is set to call another swf file:
loadMovie("frontSlideshow.swf", _root.movie1);
This frontSlideshow.swf file has the following code in every 10 frames:
this.stop();
pause = function ()
play();
clearInterval(pausei);
pausei = setInterval(pause, 5000);
This will pause the timeframe every 5 seconds before sliding to the next frame so that each image can be viewed. It seems odd that the code from this subclass file would affect the timeframe of the main class/file where the “movie1” symbol is located.
Best,
Rob -
i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones
You have your mute button on. In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side. If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad. If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear. Swipe your finger to the right until the Mute icon appears on the left side. Touch it and you will unmute system sounds.
-
I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
How can I get music from old mac to new mac?
How can I get music from old mac to new mac please?
Can't seem to make Migration Assistant work. Doesn't ask about or transfer files.I just migrated into a new MBP from an old one.
It did not bring the music over. Apple's instructions are to use the Home Sharing feature of iTunes.
Open iTunes on your old Mac. Select Home Sharing under the Advanced menu. Sign in. Do the same on your new computer. Then when the library appears under Home Sharing on the left-hand panel on your new computer's iTunes, you can select all and Add To Library.
That's what Apple says, anyway. -
How to get response from an asynchronous BPEL process in Java
I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
"org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.Clemens,
That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
To call the async BPEL process I have the following procedure:
initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
What I did so far:
- I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
- I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
EndpointReferenceType replyTo = new EndpointReferenceType();
// callback service running on local machine
// This URI class is the java.net's version
URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
// This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
AttributedURI address = new AttributedURI();
// the only public methos that made sense to me:
address.set_value(replyToURI);
replyTo.setAddress(address);
// call the BPEL process
myPort.initiate("test123", replyTo, address);
But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx. -
"Can't get Action from Action Reference"?
I really can't figure out why I get java.lang.IllegalArgumentException with "Can't get Action from Action Reference: BeanName.actionName" message. I specified all properties in faces-config.xml. Bean and its action names are all checked several times, but I still get that exception. Is it a JSF bug, or my simple mistake? Is there anyone who experienced the same problem?
I'm using two forms in one page. all components' ids are all different. Only one form generated the exception not regarding the order of the forms. (the one is login form and the other (which doesn't generate exception) is leave-comment form.)
Here is the form code:
<h:form id="loginForm" formName="loginForm" >
Login >
<h:input_text id="loginUserName" valueRef="UserBean.userName">
<f:attribute name="style" value="width:64px;"/>
</h:input_text>
|
Password >
<h:input_secret id="loginPassword" valueRef="UserBean.password">
<f:attribute name="style" value="width:64px;"/>
</h:input_secret>
|
<h:command_button id="loginSubmit" label="login" commandName="loginSubmit" actionRef="UserBean.loginAction" />
</h:form>
and here is managed-bean part:
<managed-bean>
<managed-bean-name>UserBean</manager-bean-name>
<managed-bean-class>
net.gleamynode.notes.http.faces.UserBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>idStr</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>userName</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>password</property-name>
<null-value/>
</managed-property>
</managed-bean>
Thanks in advance!here goes the source code of NotesBean:
abstract class NotesBean {
protected static final String SUCCESS = "success";
protected static final String FAILURE = "failure";
private String connectionProfile;
protected NotesBean() {}
public String getConnectionProfile() {
return connectionProfile;
public void setConnectionProfile(String newProfileName) {
connectionProfile = newProfileName;
public abstract Action getCreateAction();
public abstract Action getDeleteAction();
public abstract Action getUpdateAction();
protected Connection getConnection() throws NotesException {
ConnectionProfile profile = ConnectionProfileFactory.getProfile(connectionProfile);
return DriverManager.getConnection(profile.getUrl(), profile.getProperties());
}I think everything is ok with the beans, right?
By the way: shouldn�t the error message be:
"Can't get Action from Action Reference: UserBean.loginAction"I just examplified the message using somewhat generic name. Sorry for confusion :)
As a final try, here is the whole JSP code: (ignore korean texts)
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://gleamynode.net/notes" prefix="notes" %>
<html>
<head>
<title>gleamynode.net :: gathering of my mentality</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<link rel="stylesheet" HREF="css/gleamynode.css" type="text/css" />
</head>
<body>
<f:use_faces>
<notes:useNotes>
<c:choose>
<c:when test="${empty param['id']}">
<notes:getPages var="pages" />
<c:forEach var="p" items="${pages}" begin="0" end="0">
<c:set var="p" value="${p}" scope="request"/>
</c:forEach>
</c:when>
<c:otherwise>
<notes:getPage var="p" pageId="${param['id']}" />
</c:otherwise>
</c:choose>
<div id="header">
<h:command_hyperlink href="index.jsp" label="gleamynode.net :: gathering of my mentality"/>
</div>
<div id="menu">
About | Essays | Projects | Others | Links
</div>
<div id="content">
<div id="page">
<div id="pageTitle">
#${p.id}. ${p.title}
</div>
<div id="pageContent">
${p.content}
<div id="pageTimestamp">
${p.timestamp}
</div>
</div>
</div>
<c:choose>
<c:when test="${fn:length(p.comments) > 0}">
<div id="comments">
<div id="teaser">
${fn:length(p.comments)} ?? ??? ????
</div>
<c:forEach var="c" items="${p.comments}">
<div id="commentHeader">
#${c.id}. ${c.userName}
</div>
<div id="commentContent">
${c.content}
<div id="commentTimestamp">
${c.timestamp}
</div>
</div>
</c:forEach>
</div>
</c:when>
</c:choose>
<div id="commentForm">
<jsp:useBean id="CommentBean" class="net.gleamynode.notes.http.faces.CommentBean" scope="request" />
<jsp:setProperty name="CommentBean" property="pageIdStr" value="${p.id}"/>
<jsp:setProperty name="CommentBean" property="content" value=""/>
<div id="teaser">
</div>
<h:form id="commmentForm" formName="commentForm" >
<input type="hidden" name="id" value="${p.id}"/>
<h:input_hidden id="pageId" valueRef="CommentBean.pageIdStr"/>
<table width="95%">
<tr>
<td class="name" width="9%">Name:</td>
<td class="value" width="25%">
<h:input_text id="userName" valueRef="CommentBean.userName">
<f:attribute name="style" value="width:75%;"/>
</h:input_text>
</td>
<td class="name" width="8%">Email:</td>
<td class="value" width="25%">
<h:input_text id="userEmail" valueRef="CommentBean.userEmail">
<f:attribute name="style" value="width:75%;"/>
</h:input_text>
</td>
<td class="name" width="8%">URL:</td>
<td class="value" width="25%">
<h:input_text id="userURL" valueRef="CommentBean.userURL">
<f:attribute name="style" value="width:100%;"/>
</h:input_text>
</td>
</tr>
<tr>
<td colspan="6">
<h:input_textarea id="content" valueRef="CommentBean.content">
<f:attribute name="style" value="width:100%; height: 12em;"/>
</h:input_textarea>
</td>
</tr>
<tr>
<td class="buttons" colspan="6">
<h:command_button id="submit" label="leave a comment" commandName="submit" actionRef="CommentBean.createAction" />
</td>
</tr>
</table>
</h:form>
</div>
<div id="loginForm">
<div id="teaser">
</div>
<h:form id="loginForm" formName="loginForm" >
Login >
<h:input_text id="loginUserName" valueRef="UserBean.userName">
<f:attribute name="style" value="width:64px;"/>
</h:input_text>
|
Password >
<h:input_secret id="loginPassword" valueRef="UserBean.password">
<f:attribute name="style" value="width:64px;"/>
</h:input_secret>
|
<h:command_button id="loginSubmit" label="login" commandName="loginSubmit" actionRef="UserBean.loginAction" />
</h:form>
</div>
<div id="copyright">
Copyright � 1999~ by Trustin Lee, All Rights Reserved.
</div>
</div>
<div id="footer">
</div>
</notes:useNotes>
</f:use_faces>
</body>
</html>and, here is the whole faces-config.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<navigation-rule>
<from-tree-id>/index.jsp</from-tree-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-tree-id>/index.jsp</to-tree-id>
</navigation-case>
<navigation-case>
<from-outcome>failure</from-outcome>
<to-tree-id>/failure.jsp</to-tree-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>PageBean</managed-bean-name>
<managed-bean-class>
net.gleamynode.notes.http.faces.PageBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>idStr</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>title</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>content</property-name>
<null-value/>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>CommentBean</managed-bean-name>
<managed-bean-class>
net.gleamynode.notes.http.faces.CommentBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>idStr</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>pageIdStr</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>userName</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>userEmail</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>userURL</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>content</property-name>
<null-value/>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>UserBean</manager-bean-name>
<managed-bean-class>
net.gleamynode.notes.http.faces.UserBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>idStr</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>userName</property-name>
<null-value/>
</managed-property>
<managed-property>
<property-name>password</property-name>
<null-value/>
</managed-property>
</managed-bean>
</faces-config>Thank you for your continuous help, Rene! Learned alot from you about JSF :) -
Verizon iphone. how can i get to the home screen without activating it on a plan
how can i get to the home screen without activating it on a plan
Unless it is a 3rd party cord, there is no cord that just goes from the phone to the wall. However, you will need a cord that connects to the computer and the phone. The device is in recovery mode and you will need to restore it. See this support document for the instructions. http://support.apple.com/kb/HT1808
-
Can't get video from camera update / suggestions?
As I think others have reported, I have lost my ability to participate in iChat AV video sessions, and any attempt produces a "can't get video from camera" error message. I am running OS 10.4.5.
I have an extra internal hard drive with no OS on it, so I did a clean install of Mac OS 10.4 and iChat was back to working. I then applied all the Apple Software Updates to bring it up to 10.4.5 as well as any othe Security Updates and such, and it is still working OK as long as I boot off that OS.
This tells me the problem cannot be in my Router or DSM Modem, I think.
In the past, I have had ShowMacster and iGlasses installed on my original system, but I believe that I have uninstalled both of those properly. Still does not work.
I DO have Apple Remote Desktop - Admin installed on this startup volume, and I cannot say for sure whether the problem may have started around the time I installed it. It's possible, I just wasn't keeping chronological records of installs back then.
So, the GOOD news is that I can participate in any iChat AV session I want to be in as long as I have prior notice or enough time to reboot my G5 PowerMac under my second drive, but I still can't keep iChat AV open on my main drive and expect to be able to respond to impromptu invites to a video session.
I thought I may have read that Apple Remote Desktop can create a conflict. If anyone knows, I would be all ears! Thanks for any suggestions.
Jim Foster
Hampton, Ontario, Canada
Dual 1.8 Mhz G5 PowerMac Mac OS X (10.4.5)I believe I have solved the mystery of why I was getting the "can't get video from camera" error message. I had said earlier that I had Apple Remote Desktop (admin) loaded on my Mac but that I did not normally have this application open. What I failed to realize, though, was that for some reason I also had Apple Remote Desktop set to ON in my Sharing System Preferences pane. All I had to do was to uncheck this box and my ability to carry on video chats returned.
I expect that somehow in the process of installing and running the Apple Remote Desktop application to access another Macintosh on my home network, I must have either manually or automatically caused Apple Remote Desktop to be turned ON as if I was wanting to allow some other Admin user to connect to my Mac. Doesn't make much sense to me, but I am happy with the solution.
Jim Foster
1.89 Mhz dual G5 PowerMac Mac OS X (10.4.5) -
i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad
Maybe you are looking for
-
How can i format and finaly mount??
Hi guys, i'm trying to create an image bootable from scratch, but i fell in error right at the beginning . I've created an image filled by zero with dd if=/dev/zero of=deb.iso bs=1M count=2048 after that i've partitioning this file with cfdisk deb.is
-
Plotting data in diadem via LV
Is it possible to plot data in diadem by specifying the x and y axes values from LV at runtime? I am looking for a solution something like: 1. Load data into Diadem(give the command from LV). 2. Load layout into diadem(give the command from LV). 3. S
-
What is the latest OS for curve 8520
I am using blackberry 8520 V5.0.0.1096 (bundle 1807,platform 5.2.0.113),I would like to know if there is new OS above this.Thanks Solved! Go to Solution.
-
Deployment to oc4j 9.0.4 issues
Hello, I have trouble getting to work some of the application practices (JMS unit in particular) presented in the official oracle uni education course which I attended at the end of previous summer: JDev 10g: Develop J2EE Applications written by Mrs
-
The button is always grey on mozilla/google . How can Ipossibly know if any of the sites on the page Iam searching are secure. I used to see a green tick but this no longer happens. Think I may well have to change my browser