Can't get response from PayPal

I have been trying to make a purchase through nuts.com since Saturday.  When the popup for PayPal comes up it won't let met past the choice of credit card - keeps coming back to the same page.  I have called PayPal FOUR times and gotten no satisfaction.  To begin with, I cannot understand the people who answer - they have accents and speak too fast - I am unable to really understand all they say - I keep asking them to slow down and speak up, but they won't.  One of the reps tried to send my payment through but it would not go - she would not tell me what was wrong and told me to place my order with my credit card through the purchase site!!!!!!!!!!!!!!!!!!  What an answer!!  I have a subscription that is supposed to happen on the 6th of the month - I don't know if it will go through because no one will tell me what is going on with my account.  There should not be any problem with anything - I have not been notified that there is a problem.  HELP, help, please.......can someone help me - I cannot get anyone's help at PayPal!!!!!!!!!!!

Pavna:
Yes. I specified the URL as best as I know how. For my pc, named griot, I typed:
http://griot:7777
and
http://griot
The HTTP service starts, at lesat that is what Control Panel->Services indicate. I can stop the service and start it using Oracle HTTP Server->Start HTTP Server Powered by Apache. Because all indicates are that the HTTP server starts I am quite perplexed. I installed Oracle 9.0.2 using the standard install option. I did not install Custom. The install finished successfully.
alan

Similar Messages

  • I need some help - Can't get response from refurbished AP1232AG access points -

    We purchased 4 Cisco-refurb AP1232AG access points, intending to use one as a router and the others as repeaters. We have ran AC power to locations for all of the routers, mounted them in outdoor NEMA boxes, added the lightning arrestors and attached 12db omni antennas. All of that process went well.
    I'm trying to access the routers per instructions by cisco, which state that all refurbs are set to 10.0.0.1 and must be accessed using a console cable from computer com port to the unit's console port. We have the cable and have it set up in that manner. We have tried using telnet, serial and web sessions within the Indigo software and it  states the unit is not responding. I've tried using the Cisco IPSU and get the same message that the unit won't respond. I can't ping it from the C drive as well. All of the routers respond similarly so I'm certain that it's my fault and not the APs.
    Is there anyone who can take a minute to walk me through what I may or may not be doing correctly to access the APs and get them configured? I lack the requisite background to determine the problem on my own. I feel confident that I can configure them if I can get to them.
    Any would be appreciated.
    thanks

    Hi rlrigsby0613 and welcome to the Cisco Home Community!
    This product is being handled by the Cisco Small Business Support Community.
    For future discussions about this product, go here.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Can't get response from home button

    Hello, My home button does not respond. I have reset numerous times to no avail. Is this a hardware problem?

    It could be. My first iPhone 4 had this problem. I tried resetting, restoring etc but it turned out that it was a hardware fault.
    Does the button feel a little soft? What I mean is, has it lost the typical 'click' feeling when you press it? That was what lead me to call Apple support for a new phone...
    Apple replaced it for me no worries though.

  • Hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from

    hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me

    Apple ID security issues -
    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

  • How to get response from an asynchronous BPEL process in Java

    I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
    I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
    I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
    "org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
    HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
    Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.

    Clemens,
    That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
    To call the async BPEL process I have the following procedure:
    initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
    The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
    Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
    What I did so far:
    - I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
    - I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
    EndpointReferenceType replyTo = new EndpointReferenceType();
    // callback service running on local machine
    // This URI class is the java.net's version
    URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
    // This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
    AttributedURI address = new AttributedURI();
    // the only public methos that made sense to me:
    address.set_value(replyToURI);
    replyTo.setAddress(address);
    // call the BPEL process
    myPort.initiate("test123", replyTo, address);
    But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
    I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx.

  • Can we get data from business views  in CR 2008/XI?

    Hi All,
    Can we get data from business views  in CR 2008/XI?
    If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
    Thank you,
    Krishna Pingali

    Hi Krishna,
    Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
    You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
    It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
    Contact our Sales department for pricing and availability.
    Thank you
    Don

  • How can I get values from listbox?

    Hi all,
    I need to get price values from Price List (Inventory -> Item Master Data screen). It's important to get values from field 'Price' BEFORE item will be added/updated.
    How can I get values from Pricelist listbox?
    Thanks for any suggestions or short sample code.
    Best regards,
    Andy

    Hi Andy
    Here is som sample code that will get the description of the price list and also the price that is displaying at the time. The item master must be open for this snippet of code
      Public Sub GetItemPriceFromOpenWindow()
            'this is assuming item master is open
            Dim oEdit As SAPbouiCOM.EditText
            oEdit = SBO_Application.Forms.GetForm("150", 1).Items.Item("34").Specific
            SBO_Application.MessageBox(oEdit.Value)
            Dim oCmb As SAPbouiCOM.ComboBox
            oCmb = SBO_Application.Forms.GetForm("150", 1).Items.Item("24").Specific
            SBO_Application.MessageBox(oCmb.Selected.Description)
        End Sub
    Hope it helps

  • HT203167 lost my hard drive how can i get songs from ipod back to new computer

    I lost my hard drive and want to get my music back on my new computer. How can I get songs from my ipod to my computer? I am afraid to sync it and losing what is on my ipod. Any help would be appreciated.

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup, not good, then you can transfer itunes purchases from your ipod:  File>Transfer Purchases

  • How can I get Data from the Sound cart in Labview? Does a VI exist?

    How can I get Data from the Sound cart in Labview? Does a VI exist?

    Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
    Khalid

  • Can't get playlists from one one computer to another.  Confident Home Sharing is turned on correctly.  Have imac and macbook Air and Lion.  Using smart lists.

    Can't get playlists from one one computer to another.  Confident Home Sharing is turned on correctly.  Have imac and macbook Air and Lion.  Using smart lists.

    Using Ethernet, I am attempting to stream the movies on my computer to my girlfriends computer through iTunes home sharing. I want to watch the movies that are on one computer on another.

  • Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

    Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

    Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

  • How can i get contacts from my old Nokia phone to iphone 4S

    how can i get contacts from my old Nokia phone to iphone 4S?

    Appreciate the reply thank you
    Issue being is I don't have the lead for the samsung any longer but have the memory card?
    An yes I know I need to get them onto my MAC but how is what i'm struggling with?
    Any help would be appreciated.
    Many thanks

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

  • How can I get music from old mac to new mac?

    How can I get music from old mac to new mac please?
    Can't seem to make Migration Assistant work. Doesn't ask about or transfer files.

    I just migrated into a new MBP from an old one.
    It did not bring the music over.  Apple's instructions are to use the Home Sharing feature of iTunes.
    Open iTunes on your old Mac.  Select Home Sharing under the Advanced menu.  Sign in.  Do the same on your new computer.  Then when the library appears under Home Sharing on the left-hand panel on your new computer's iTunes, you can select all and Add To Library.
    That's what Apple says, anyway.

  • How can I get sound from tv or stereo when watching netflix on MacBook Air?

    I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook.  How can I get sound from other sources ie tv or stereo?

    Check with Netflix for their system requirements.

Maybe you are looking for