Can't get rid of error message "MSVCR80.dll" on my windows PC? Mistakenly clicked on the 'sync to all ipads etc" when I was trying to download an ebook. Since discovered it is an outdated piece of software that ought to be taken from the net.
I can't get rid of message "MSVCR80.dll" on my windows XP PC. I mistakenly clicked on the 'sync pc ipad etc" choice not knowing it was an outdated piece of software. I need plain english assistance. thanks, self seal
That's an iTunes error message. Please post this over in the iTunes for Windows forum. This is iCloud.
Similar Messages
-
How can I get rid of error message?
Have tried to set up my pop3 email on my 6700 slide using the same settings I've always used on previous phones/pc and for some reason emails just won't send. However my main problem is that I keep getting a message flash on screen saying 'Unable to send message:[Email address]. As soon as I clear it, it comes back about 2 seconds later and just won't go away. Stops me doing anything on the phone as I have to keep clearing the message every few seconds. I've gone into drafts/outbox, every folder I can find in 'Messaging' and there's no copy of the email to even delete it. I've even gone to my mail server on the web and the message isn't showing. From the mailbox itself on the phone, I've tried to folders under 'More folders' but there's nothing showing - no sent or drafts folders. How can I stop this error message appearing every 2 seconds?
Hello, Sorry to hear that you can't get rid of this message from your device. I suggest you try going to http://email.nokia.com and register there. I think you'll find your email experience much more to your liking there.
Chris McK - Nokia Messaging/Social Product Marketing -
8500 909n new printheads installed can't get rid of error message
I purchased new printheads from the HP store. The arrived and I installed them into my printer. Everything worked fine. Several days later I attempted to print something & got the Printhead Probem The following printhead has a problem: black/yellow[k/y}, magenta/cyan [m/c]I re installed them, turned the printer off & left it, turned back on several hours later - error still there. Ran HP Print & scan doctor - it tells me to go ahead & print a page - no go. Erro continues to appear on printer display - I can't clear it & nothing is helping! I have filled out the feedback forms & the surveys but no response. Has anyoneelse experienced this??? Any answer to this??? HELP!!!!
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80 -
Can't get rid of Error Message
Printer was working fine till this morning. Display says "Please turn Printer off, then on." Have done this multiple fimes, both with the power button as well as disconnecting the power supply. When it starts back up, it flashes a blue screen for a second (with the code B8B200A6), then goes back to the "Please turn Printer off, then on." white screen.
Any advice? Or is this the equivalent of the "blue screen of death"?
Thanks in advance for any help and assistance.Hey there Tabasco
The blue screen could be related to the USB cable. Are you connecting a 2.0 USB cable to a 3.0 port on your computer? That could be causing the blue screen.
Please check the USB cable and port and ensure there is not a 2.0 cable in a 3.0 port.
The error could also be a printer failure related message, try a power reset and plug the printer in directly to a wall outlet, avoiding power bars, surge protectors, etc, if it's not already that is.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Please let me know the outcome of those steps and if they did not work, let me know if the printer is still in warranty with HP. I will then see if there are other options.
Have a great Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Can't open iTunes. error message: MSVCR80.dll is missing
Can't open iTunes.
Get error message that MSVCR80.dll is missing. Try reinstalling.
Tried reinstalling. Same problem.iTunes for Windows: Missing MSVCR80.dll
-
How can I get rid of this message that keeps popping up:
Widevine Media Optimizer Update Available? Don’t know what it is but don’t want it.Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software. -
When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I can no longer access my itunes on desk top computer. Receive error message "MSVCR80.dll is missing from your computer....must reinstall" ???? Solutions? Cause?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
When i try to open iTunes I get error message "MSVCR80.dll was not found"
When I try to open iTunes I get error message "MSVCR80.dll was not found"
Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
How can i get rid of a message asking for a keychain password
how can i get rid of a message asking for a keychain password
Morning5,
you can get rid of a message asking for a keychain password by resetting your keychain. -
Is there any command/FM to get rid of error message in CATT?
Dear friends,
Is there any command/FM to get rid of error message in CATT? such as the following in eCATT script?
MESSAGE ( MSG_1 ).
ENDMESSAGE ( E_MSG_1 ).
or any body now how to get the socrce code of these commands?
Many thanks!
CliffHi,
See the help
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2143b408e11d1896b0000e8322d00/frameset.htm
Regards
Kiran Sure -
After updating itunes on my pc, I get the error message "MSVCR80.dll is missing." Reinstalling itunes does not help.
MSVCR is Microsoft Virtual Creator. It's an MS dirivitive of Java.
Try running Windows Update, and see: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ msvcr80dll-problem/e5e1ae2f-f109-4bde-af20-ebcb7244fb5c
for more info. -
Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
I have a Mac OS X Yosemite 10.10.3, i have no problem viewing videos on youtube but when i try and watch movies or tv shows streaming them off websites, it seems to come up with this message. 'Please install flash player HD to continue (required),' w
-
My iPad 2 will not update apps after upgrading to the new ios
MMy apps will not update nor can I install new apps. Anyone have a solution?
-
New MacBook Pro and 30" display - resolution wrong
Just got new MBP with Snow Leopard. Had 30" Cinema Display connected to old mbp with dual DVI (at least, I think that's what it is - I'm not connector/adapter literate). Since there was no port for the multi-pin part of the adapter I called Apple sup
-
Problem while using BAPI_REQUISITION_CREATE
Hi Friends, i am working with BAPI_REQUISITION_CREATE for creating Purchase requisition. i used bapi and pass only basic parameters .. like i filled first parameter (item data) of TAB Tables . Which are--- item Doc_type = NB plant material qty req
-
Hi there, I would like to use QT file that was made from a super 8 mm movie. I don't know what settings were used to make the QT. Could someone help me and tell me what would be the recommended settings to get the best results ? I also have a questio