Can't get rid of Flash CS3 Trial !

I did a search first, no real solutions in prior posts that I
could see. Searched the rest of Adobe too.. no solutions found that
apply.
In January I downloaded and installed the Flash CS3 Trial.
I'm not going to buy it, so now that the trial has expired, I want
it OFF my machine. I ran it thru the usual Add/Remove Programs.
Well, my machine rebooted (I was doing something else at the time
and never did see any prompts to reboot from the installer
program), but when it came back up the Flash CS3 trial
was still there ! So, I tried the add/remove again - only
this time the only thing it would uninstall are the Flash Player
and the Flash Player 9 ActiveX component ! NO choice to get rid of
the actual program.
What do I have to do to get this program OFF my hard drive ?
There's no other uninstall program, the add/remove programs is
useless, and the only thing even close for getting rid of it was
some CS3clean script - which was apparently meant for deleting the
early BETA versions.
How can Adobe NOT supply an uninstall mechanism other than
add/remove programs - most other software I've ever used does
!!

Thanks, wasn't sure about that. It's not a problem, Flash CS3
is the ONLY CS3 product on my machine. I have Studio 8 currently
installed, and CS2 Suite too, so hopefully that won't be trashed.

Similar Messages

  • Can't get rid of "Master Collection Trial. Your trial has expired."

    Can't get rid of "Master Collection Trial. Your trial has expired." I have Adobe Pro and can't use it because I tried the Master Collection Trial. Please help.

    Have you purchased Master Collection?  If so please click on the License this Software button and enter your Adobe ID and serial number to enable the software.

  • Can't get rid of grid after trial finished

    I downloaded CS5 trial and, when it ran out, I got grids over all my pictures.  I just bought and installed CS5 and put the download in the trashcan, but the grids are still there.  How do I get rid of them?

    Photoshop doesn't work that way.
    When the trial ends, Photoshop just stops launching.
    So, what "grid" are you referring to?

  • Can I get rid of the flashing bar of words while texting? Or even writing this post?

    Can I get rid of the flashing bar of words while texting? Or even writing this post?

    Settings - general - keyboard - turn off predictive text.

  • I can't get rid of firmware for WRT54RS flashed on WRT54GL router

    Today I tried (unsuccesfull) to reset my router back to factory default.
    Unfortunately I found that the IP address did not reset to factory default.
    But I still can ping the device.
    So I checked the firmware by logging into the device.
    B.t.w the admin account credentials changed back to factory default.
    First I checked the model of the router and compared that with the firmware within the device.
    Then I found the mismatch, the device specs say it's a WRT54GL and the installed firmware says it's WRT54GS.
    This seem to be some custom made firmware of some kind.
    In the administration section, I found that the firmware update tab is missing.
    I then googled for some methods trying to flash the device with the appropriate firmware.
    At first I tried the 30/30/30 reset procedure, after reboot still the same settings, so no luck here.
    Next I tried tftp with the appropriate firmware version.
    After specifying the location of firmware, entering the device password (which happen to be the default due to earlier reset), I then hit the start button.
    Some leds start to flicker, then after about 20 seconds the error text occur "unable to get a response from the server".
    So I can't get rid of this mismatch firmware here.
    What do I do next?
    How about jtag?
    Assumption is the cause of all misery

    Hi wrtlinksys-user, you can try to do a funny reset on the router. To do it, just press and hold the reset button on the device for 30 seconds and when you reach 20 seconds while counting, simply unplug and replug the power adapter of the router. Update us if this will help you.

  • A Flash popup keeps hanging so I can't get rid of it

    Hi - I haven't been able to play Farmerama for several days (all my crops have turned to weeds) because of a little box that pops up in front of it: "Adobe Flash Player Settings."  It says it's stored 6k and wants to store unlimited.  In the past, I've clicked "Allow," and then it went away and the game proceeded.  But for the past several days it's been hung.  I close it (the tab or the browser) and start over and it hangs again.  I did follow the instructions on Adobe Flash Player Help to increase the amount of storage allowed for Farmerama and restarted the application, with the same results.  I've also emailed the site that provides the game, but haven't heard back from them.  I can't get into the game with the Adobe box hung on top of it.  How can I get rid of or circumvent the box?
    Thanks for your help!

    Thanks again, Mike --
    I didn't reply right away, because the game started having trouble loading, and wasn't getting to the point where the popup would come up, so I couldn't tell whether that worked or not.  Then suddenly it started working yesterday, and gave me a game wrapper for the popup with a checkmark to click, and that worked.  Apparently, they have it set up so I can't click the Adobe popup directly, but have to click their own checkmark that surrounds the Adobe box, and that was what wasn't working.  Go figure!  I guess that's a problem with the game, not actually an Adobe problem.
    Thanks for your help!
    I went ahead and checked "yes" for you - your suggestions were accurate, but I didn't understand what the problem was.  ;-)

  • How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?

    After having payed fo an account for one year for Photoshop CC and Lightroom 5 i keep getting the message ,that I am using a trial version of Photoshop CC.
    Lightroom on the other hand is not functioning in a trial version !
    Could anyone tell me how I can start working with Photoshop CC while not in trial mode ?
    Peter

    I Don’t know how I di dit, but when I started Photoshop this mornig all of a sudden it worked.
    I am happy now and thank you for your efforts.
    Regards
    Peter Hordijk
    Van: Rajshree 
    Verzonden: woensdag 21 mei 2014 19:04
    Aan: Peter Hordijk
    Onderwerp:  How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?
    How can I get rid of the message that I am using a trial version of Photoshop CC even after becoming a paying member for Photoshop CC and Lightroom ?
    created by Rajshree <https://forums.adobe.com/people/Rajshree>  in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6398343#6398343>

  • How can I get rid of malware flash player

    how can I get rid of malware flash player (May 18,'13)

    How do you know you have malware, and where did you get it?

  • Can't get rid of Yahoo on toolbar after installing flash player

    I installed the latest Flash player yesterday on Firefox. I had Google on the toolbar for searching, but after I installed flash, it was replaced by Yahoo. Now I can't get rid of Yahoo. I've gone through Firefox's instructions, I've gone through the control panel, I even uninstalled flash player. But Yahoo is still there. I want it gone! How do I get rid of it???

    See: "How
    to Reset Internet Explorer settings".
    Then...
    1. Please download and run the Microsoft
    Safety Scanner tool (freeware).
    2. Reboot your PC.
    3. Please download and update Malwarebytes Anti-Malware
    Free
    4. Reboot Windows in Safe
    Mode and run a Full
    Scan with Malwarebytes Anti-Malware.
    If still no joy...
    5. Download and Run AdwCleaner, RogueKiller and Junkware
    Removal Tool (Freeware)
    6. Reboot and Test.
    Best of Luck, 
    Vincenzo Di Russo
    Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
    Moderator in the Microsoft Community and TechNet Forums
    My MVP Profile

  • How can I get rid of the Flash Drive password?

    I have recently purchased a 16Gb USB stick. When I plugged it in (Win 7 Ultimate) it came up as enhanced storage and I created passwords.
    Now I cannot use it on Vista or Xp computers. On vista I right clik and select unlock but nothing happens. On XP the it shows up as removable disk and when I click on it it ask to insert disk.
    How can I get rid of the password - in win 7 icant have a blank password for it

    Hey,
    In your case i would contact Toshiba memory support. You can give them a call or write an e-mail, have a look on Toshiba memory page:
    http://www.toshiba-memory.com/en/service_support.html
    Have you created the password using U3T software? On the same Toshiba page there is a FAQ article how to remove U3T Launchpad software.

  • Installed office for mac (trial version). now I got 2 excel files, which cannot be deleted. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion(with win 7 parallel)

    now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)

    The people who make that stuff have their own forums you can also search/ask in:
    http://answers.microsoft.com/en-us/mac/forum

  • Installation error message - can't get rid of it

    here was an error with this action. Try again later.
    c35b41ef-ee6d-400e-bde1-6bf8ab4038f1
    Can't get rid of error message,
    can't license the product after trial period
    Yes I have a subscription - 12mths

    uninstall your cc app and the problematic product, run the cleaner (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall your cc desktop using the correct adobe id, Adobe: Creative, marketing, and document management solutions
    finally, install the problematic product using the cc desktop app.

  • Flash CS3 trial version - Dreamweaver 8 won't work anymore

    I recently installed the trial version of Flash CS3. It
    worked fine, but after the 30 day evaluation period, Dreamweaver 8,
    an app I've had installed for a few years now ceases to work. It
    loads up, then immediately crashes. Prior to that, both apps worked
    fine concurrently.
    I uninstalled the Flash CS3 trial version. Still, Dreamweaver
    8 crashes.
    I found the CS3Clean Script, ran that, and Dreamweaver 8
    still crashes.
    I'm positive this has something to do with the 30 day
    evaluation period, because I was using Dreamweaver fine yesterday.
    Any ideas on how I can fix this?
    I've tried re-installing Dreamweaver along with the 8.0.2
    update and still get the same results.
    I have Flash 8 installed already, if that helps.
    Thanks.

    This really depends on what exactly you want to do.
    To export Photos from iPhoto to the Finder just use the Export command: file -> Export
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    But this will not save you any disk space unless you also delete the photos from iPhoto.
    If you want to move the Library to a flash drive: first make sure it's big enough.
    Then make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the Flash Drive.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How can I get rid of error message?

    Have tried to set up my pop3 email on my 6700 slide using the same settings I've always used on previous phones/pc and for some reason emails just won't send.  However my main problem is that I keep getting a message flash on screen saying 'Unable to send message:[Email address].  As soon as I clear it, it comes back about 2 seconds later and just won't go away.  Stops me doing anything on the phone as I have to keep clearing the message every few seconds.  I've gone into drafts/outbox, every folder I can find in 'Messaging' and there's no copy of the email to even delete it.  I've even gone to my mail server on the web and the message isn't showing.  From the mailbox itself on the phone, I've tried to folders under 'More folders' but there's nothing showing - no sent or drafts folders.  How can I stop this error message appearing every 2 seconds?

    Hello, Sorry to hear that you can't get rid of this message from your device. I suggest you try going to http://email.nokia.com and register there. I think you'll find your email experience much more to your liking there.
    Chris McK - Nokia Messaging/Social Product Marketing

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for