Can't get rid of Red Frames or Audio dropouts on PPCC7.2.2

I'm on a Mac OSX 10.9.1 using PPro CC and Encoder 7.2.2(33). 
Have tried using the "clear the media cache" trick; worked once, but not the second time.
Still getting Red Frames on long exports (more then 8 min).
Also, I get blasts of white noise now and again which scare me out of my chair.
The Noise blasts and red frames happen about 5x in a 00:28:30 Export.
What can I do to rid myself of these problems?

Ask in the Premiere forum and by all means be a lot more specific - proper system info, exact sequence settings, source file info, export settings.
Mylenium

Similar Messages

  • Can't Get Rid of Dropped Frames in FCP 7

    Hello all,
    I am editing in FCP and have only gotten as far as laying down a music track (MP3), and some b-role. I have given myself some space at the beginning of the track, and as soon as the video kicks in I get the dropped frames message. There are no fancy edits or effects, just the video. It happens with both .MOV files taken with my Canon 7D, and with footage I had converted from .MTS.
    The RT drop-down menu in the timeline only offers the following options:
    Play Base Layer Only
    Use Playback Settings
    Full Quality
    I have gone into Playback Control under System Settings and adjusted the options to the following:
    RT: Safe
    Video Quality: Low
    Frame Rate: Quarter
    I am still receiving the dropped frame message. My footage is stored on a 500 GB external Rugged LaCie drive, and is connected using 8-pin FireWire. The footage is being edited in 1080. Everything is up to date.
    Much appreciation for your help.

    Thank you both for replying.
    I converted the audio file (but still getting the error message) to AIFF/16bit/48kHz using iTunes. I had converted the .MTS fils to .MOV with iSkysoft Converter to the following settings:
    Resolution: 1920x1080
    Frame Rate: 23.97
    Bit Rate: High Quality
    Channel: 2 Channels stereo
    Sample Rate: 44100
    Bit Rate: Medium
    I did not convert any of the Canon files to Pro Res. What do I need to do with those files? and is there something I can do during capture to help save a step in post?
    Thanks again to you both!
    Warmest regards,
    ~Shawn
    Message was edited by: ShawnSpitler

  • SOMEBODY PLEASE HELP, Can't get rid of Red Underlined Text

    So after I lost a major part of my script and am now prepared to  rewrite, now Every Font is in Red with underline. When I try to  backspace, it turns my original font to red as well. This script seems  like it's gonna be huge, judging the many impedents it's facing. I hope  there's an easy solution to this one. I've tried to change it from the text color, but those settings look ok,  black dot on white background. There's something going on that I can't  figure no matter what I'm trying.

    Looks like 'Track changes' is on for this document. Just turn it off from the toolbar [Review -> Start Tracking changes] in the authoring view itself.
    Also the changes that are marked as deleted (crossed), do mouse hover on the text and 'reject change' and for inserted text (red color with underline) do 'accept change'. This is just so that you don't need to type it again and the text would become normal.
    Thanks
    Adobe story team

  • Can't get rid of Photoshop frame when saving image

    Hello! I'm having a very frustrating time saving an image from Photoshop to a CD. I hope you can help me.
    I have an art piece that was professionally photographed and saved on CD. I recently opened the image with Photoshop Elements and cleaned it up. I tried to save the image (gave it a new title so it wouldn't replace the non-edited original) onto the CD, but when I did, the Photoshop frame (the layers screen, photo bin, etc.) was saved with it. I just want to save the image. How do I do that? Thanks!

    Sounds like you took a screen shot. But more likely, your computer is set to open images in photoshop hence the PS frame. Try saving the image as a JPG and opening it with a preview function rather than the default PS.

  • Please help. How can I get rid of this red dotted border around my navigation bar images?

    If you go to my site here...
    http://metalwolf92.zymichost.com/
    And left-click and hold down your mouse, but don't release, on any of the navigation button images. Notice the red dotted border? How can I get rid of those?
    All images already have border set to 0.

    I just noticed your page has no css. so in Code View, replace this closing tag:
    </head>
    with this:
    <style type="text/css">
    a:active {
      outline: none;
    </style>
    </head>
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Strange frames i can't get rid of

    I'm using premiere to cut an already cut movie. this means that most of my edits are close to a pre-existing cut. for some reason single frames are seen in the edits when i play it back, but not when i advance frame by frame.
    to make matters worse when i exported my project, even more of these strange frames appeared at almost every cut i made. it makes my edit look incredibly ammaturish, but i can't get rid of them!!
    the more i search through the footage frame by frame the less extra frames i see, but the more i play it back, the more appear
    it's totally infuriating!

    In the context of a straight cut, surely no handles are nessicary?
    by straight cut (just so there are no further misunderstandings) I mean that one frame is in one shot and the very next is in another with no transitions such as fades etc. just whack to the next clip; the standard most common cut.
    i'm pretty sure handles isn't the problem.

  • Gm. i have a red (1) indicated on my ICal icon. How can I get rid off it?

    gm. i have a red (1) indicated on my ICal icon. How can I get rid off it?

    You may have an invitaion waiting.
    Reply to an event invitation received in Calendar
    http://support.apple.com/kb/PH11521

  • Crazy gap I can't get rid of! help - please??

    Hi - my first time on here (well, needing to be on here..!).
    I'm having a heck of a time. I've just been hand-coding a fairly
    simple site - which I've now finally gotten around to updating.
    The site is:
    http://www.arcfoto.com
    I'm trying to set it up as a fixed (un-resizeable) console
    window with a flexible content pane. So - I've been using
    dreamweaver to set it all up. But the problem is that I've got this
    really persistent gap that I can't get rid of. It's spans the left
    and top sides. (about 10px of white) - in the version you see if
    you visit the URL - I've had to add gap to the bottom and right -
    just to not make it look TOO WEIRD. But I'd really really like to
    get rid of it.
    The basic architecture is the following: Javascript window
    containing tables to organize content. Nothing special - just
    rollovers. A friend suggested I could add CSS commands to get rid
    of it. I've been doing a fair bit of messing around with any and
    all CSS parameters I could.... but nothing seems to really make a
    difference. I'm thinking it's got something to do with the
    javascript window definition for the window on the entry page
    (previous page). But I really have no idea. I'm HOPING, PRAYING -
    that someone here might have a suggestion for a quick fix - or a
    fix of any kind...! I've been struggling with this for WEEKS
    now...!
    Thanks.

    Martin?
    Your PNG files are so huge because you have not properly
    exported them from
    FW. Just export as JPG images - they'll be fine if you don't
    OVER optimize
    them, and they'll be MUCH smaller than these are now.
    This is a bit hinky -
    .style1 {
    font-family: Arial, Helvetica, sans-serif;
    font-weight: bold;
    color: #D1CED0;
    border-top: 0;
    border-left: 0;
    border: 0;
    body {
    background-color: #666666;
    border-left: 0;
    border: 0;
    border-top: 0;
    border-top-style: outset;
    margin-left: 0px;
    margin-top: 0px;
    try this -
    .style1 {
    font-family: Arial, Helvetica, sans-serif;
    font-weight: bold;
    color: #D1CED0;
    border-width:0;
    body {
    background-color: #666666;
    border-width: 0;
    margin-left: 0;
    margin-top: 0;
    But the big question is: will it work for me?
    It could.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "arcfoto2" <[email protected]> wrote in
    message
    news:[email protected]...
    > Thanks Martin...! That was certainly very gentlemanly of
    you. I'm not sure
    > how
    > my response to the previous got in ahead of yours. No
    doubt you started
    > the
    > reply before I did mine or something.
    >
    > I felt I really wanted to try going with PNG because in
    last years I'd
    > been
    > having lots of problems with JPGs - artifacts, sure...
    but also color
    > drift and
    > averaging - causing noticeable differences between text
    block backgrounds
    > and
    > the bg itself, etc... but I figured my site was very
    minimal, very
    > sparse... so
    > PNGs were no HUGE sin, considering many people seem to
    have loads of SWFs
    > all
    > over theirs... but that's here nor there...
    >
    > Thanks.
    >
    > This is the CSS code I ended up with:
    >
    > .style1 {
    > font-family: Arial, Helvetica, sans-serif;
    > font-weight: bold;
    > color: #D1CED0;
    > border-top: 0;
    > border-left: 0;
    > border: 0;
    > }
    > body {
    > background-color: #666666;
    > border-left: 0;
    > border: 0;
    > border-top: 0;
    > border-top-style: outset;
    > margin-left: 0px;
    > margin-top: 0px;
    > }
    >
    > Suppose I did it twice, huh? I'm assuming the 'body' one
    can come out.
    >
    >
    > ALSO - I'm sure I should really post a separate topic
    for this - but maybe
    > it'll help cut down on the overall number of topics if I
    post it here... :
    >
    > Not sure if you noticed my redundant links. I have a set
    of nav links for
    > rollover (since I'm REALLY finicky about typography -
    has to be myriad)
    > and
    > another set of TEXT links which are being pushed out of
    the frame (not
    > supposed
    > to be visible).
    >
    > The reason I'm doing this is for bot-cataloging - since
    it's my
    > understanding
    > that google, et. al. does not penetrate image links.
    Only text - from what
    > I
    > understand. So - yes, well... it's an SEO trick. I'll
    ask you to suspend
    > moral
    > judgement. But the big question is: will it work for me?
    >
    > thanks again,
    > Jonathan
    >

  • Can't get rid of the # when adding text

    I'm trying to edit a document in Indesign. I started by doing a Pre-Flight to correct errors and have one left I can't get rid of.
    Originally the Text Error was for a font that ID could not find so I changed the font to what was already being used for other text - an included font - Charlamagne Std Regular
    When trying to type text into a text box the type jumps to just above the text box where the pound sign (#) sits.
    When entering type, even after positioning the curser inside the text box, it jumps the text to right before the pound sign, on top of the text box, and adds a pink box under the text.
    I have attached a screen shot to show this. How to I get rid of the pound sign and pink box to be able to simply type some text in the text box (that the pink box is in)? Thanks!

    @dkg62 – to make clear what's going on, select the text frame and show us another screenshot.
    There are at least four cases where you can get a text like that. All cases imply, that the font you'd like to use is missing. I simulated this by formatting text with a font weight that is not available by a character style.
    1. The most likely case: There is baseline shift applied; here in my case 9pt.
    All other cases are academical, because the pink highlighting is aligned with the text:
    2. Text frame options, baseline set to a fixed value (zero in this case)
    3. Text on path and the text frame options (baseline) is just the standard default. You can see a second #-end of story sign inside the text frame.
    4. Text on path and the text frame options (baseline) is set to fixed (zero in this case). The second #-sign inside the text frame is shifted above because of the fixed value of the baseline option of the text frame options. And obscured by the pink highlighting.
    Uwe

  • How can I get rid of the "Reset Search" app?

    I have a Macbook Pro and I run Mavericks OS X 10.9.5. There's an application in Launchpad called "Reset Search".See picture 1. I know this is part of the "Install Mac" adware, but I still can't find a way to get rid of it. I downloaded Adware Medic to try and remove the adware but it said that it couldn't find anything. I also tried a manual removal following the steps from http://www.thesafemac.com/arg-genieo/, where it says to remove the file "/private/etc/launchd.conf" but I can't find that file anywhere. I'm scared to continue because it says, "Failure to properly remove this file, if it is present, will result in your computer freezing and becoming unable to start up!" Also way before I knew this was adware I reset the browser settings a few times using the pop up. See Picture 2.

    Problem description:
    Accidentally downloaded the adware “Install Mac” and can’t get rid of it because I can’t find any traces of it, except for the “Reset Search” app on Launchpad.
    EtreCheck version: 2.1.8 (121)
    Report generated April 17, 2015 at 5:27:29 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Check Battery - Cycle count 629
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.9.5 (13F34) - Time since boot: 3:17:9
    Disk Information: ℹ️
        APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (461.96 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS41N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 537 - SDK 10.9
        Unity Web Player: Version: UnityPlayer version 4.6.1f1 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 25 Check version
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            29%    com.apple.WebKit.Networking
             9%    WindowServer
             4%    Safari
             2%    mdworker
             1%    PluginProcess
    Top Processes by Memory: ℹ️
        176 MB    Safari
        175 MB    com.apple.WebKit.WebContent
        120 MB    com.apple.IconServicesAgent
        82 MB    Finder
        73 MB    mds_stores
    Virtual Memory Information: ℹ️
        372 MB    Free RAM
        1.80 GB    Active RAM
        1.50 GB    Inactive RAM
        620 MB    Wired RAM
        670 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 17, 2015, 02:55:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-04-17-145559_[reda cted].crash
        Apr 17, 2015, 02:09:49 PM    Self test - passed
        Apr 15, 2015, 04:35:46 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-04-15-163546_[redacted].crash

  • I can't get rid of a "Not Enough Storage" pop-up on my IPad2.  Can't close it and can't access settings.  Can't shut off the device either.  It's just locked up.  What can I do?

    How can I get rid of the "Not Enough Storage" pop-up on my IPad2?  It won't go away, I can't cancel it, I can't access settings, and I can turn off the IPad to reboot.  It is just locked up. 

    Reboot the device.
    Shut down the device by holding the sleep/wake button  and the home button at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
    Wait until the white Apple logo appears.
    When this happens, you can let go - the iPhone is rebooting.

  • How can I get rid of this number even though all apps are updated and installed?

    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?

    stamatgeorge wrote:
    Weird problem - How can I get rid of this number on top right even though all apps have been updated and installed?
    That doesn't mean that you have updates.
    Not sure how that app works, - normally means you have a notification for that app - what happen when you go into the app?
    If you had update it would be a red number for the app store icon

  • My FCP X automatically added a resize and crop effect to my entire movie, how can I get rid of it?

    My FCP X will not let me cut nor copy a section and paste it any where.  What can I do?
    Also, while trying to do this, it added a reshaoe little red box to my entire 90 minute feature film.  How can I get rid of this effect?  Have no idea how it can just show up like that when I never asked it to???

    My FCP X will not let me cut nor copy a section and paste it any where.  What can I do?
    You'll have to tell us exactly what you;re doing and what happens when you do it? Maybe post some screen shots?
    Also, while trying to do this, it added a reshaoe little red box to my entire 90 minute feature film.  How can I get rid of this effect?  Have no idea how it can just show up like that when I never asked it to???
    Screenshot? What are you copying from where? And where are you pasting to?

  • HT4009 Whenever I go to make an in-app purchase, a message pops up saying "this is not a test user account." What does that mean and how can I get rid of it so I can purchase things?

    Whenever I go to make an in-app purchase, a message pops up saying "this is not a test user account." What does that mean and how can I get rid of it so I can purchase things?

    Try a soft-reset and see if it works after your phone has restarted (it seems ot have fixed the error for a number of people on here) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • Screen Recordings in QT won't quit. Can't get rid of them.

    Hi,
    I tried out screen recording with QT. Now I have a couple of videos that I can't get rid of. They always come back no matter how I shut down QT. If I just press the red circle, QT stops working and this dialogue appears off screen:
    (I can get it onscreen by playing with screen resolutions)
    I however can't do anything from here on. I have also tried to export the files before quiting, but that only make QT crash.
    How can I make these videos disapear? The machine I'm using is a video edit, and the videos include images from videos for our client, that I don't want to pop-up incase were in the edit with another client.  Were running a Mac Pro with OSX 10.8.3

    I had a similar problem as I had gotten a hand-me-down 8130 that had some nice prismatic scratches in the screen.  I myself tried clear coat car polish (quite similar to toothpaste in abrasiveness) with no success. 
    Luckily I found a solution.    I bought Quixx Acrylic Scratch remover.  It was about $9 for the kit. I found the stuff at my local walmart in the automotive section, but I understand stocks vary greatly store to store.  Using the included cloth, I applied it and with lots of elbow grease removed the scratches.  Any prismatic/distorting effects are completely gone, and there is only the tiny smoothed out remnants of a few of the deeper marks.  I believe the product has both a micro-abrasive as well as chemical compontent that dissolves the plastic on a microscopic level to smooth out any corners that cause light refraction.  
    You will have to follow the instruction, and literally polish vigorously for 2-5 minutes with the included cloth and heavy pressure to get results.   I mean don't bear down with all your weight, as you don't want to break the housing or pop the screen cover loose, but don't just wipe lightly either.   
    And be sure to use the cleaner only on the transparent part of the screen.  It didn't seem to harm the painted sides of the display area, but I didn't actively polish them.    On the plastic surfaces (like the battery door) I found the clear coat polish worked fairly well.  
    I didn't have any need to use it, but I would avoid the sandpaper included in the kit.  If your scratch is deep, try the polish anyways first, and might need to polish more than once to get results. 
    Message Edited by malibu35072 on 03-21-2009 11:27 AM

Maybe you are looking for