Can't get rid of wide left margin in document
I'm working with a student on laying out a school newsletter, 8 pages long. After laying out 7 pages, the whole document was shrunk on the left side by the appearance of a 1 1/2" wide gray margin, which I can't remove. It prints that way too. The doc was perfectly formatted until this suddenly appeared. What causes this and how do I get rid of it?
Shep,
Welcome to Apple discussions.
Click on your View menu and see if Comments are turned on. If they are, shut them off, then try printing again.
-Dennis
Similar Messages
-
How can I print with a wider left margin in Preview? (OSX 10.5)
How can I print with a wider left margin in Preview? (OSX 10.5)
To punch Binder Holes.
Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
Info so far:
Found an older post from 2002 ... "Make a custom page"
Mac Help has a limited, simple, incomplete answer: "Make a custom page"
Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
Printing a PDF from Preview
MacBook Pro
OSX 10.5.6
Thanks
PeterThanks ... tried the Paper Handling, but no lock.
Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
Th only "work around" solution is to ...
Rotate the PDF page 180, then scale slightly (90% or so ...)
This pushes the upside down page, down and to the left.
While this is the opposite of what is desired, the print is then correct when
it is punched and placed into a three ring binder.
Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
ie: In Preview, Custom Page does not work correctly,
Thanks allfor the comments and help ... -
Can't get rid of empty space in ID document.
I am laying out a book in ID CS4 Standard. I added more text to the end of the book and ended up with an unexplained empty space in between the old and the new material that won't go away.
The text is laid out in threaded text frames that run from page to page. There is currently a blank page and a three quarters in bet. the old and new. (If I press backspace just the first word on the second segment of text connects to earlier text and as soon as I press space bar to break between words it jumps back over the blank space.)
Any advice or suggestions are appreciated because I am stuck.
Thank you.
Bubby BellaSounds like it could be a problem with Keep Options, but it's pretty hard to tell without seeing the pages. Are the columns the same width on both pages? This sort of thing also happens if you've got a long string that can't break and it's too wide for a column (not allowing hyphenation and using No Break or a lot of non-breaking spaces is a classic way to to make that happen), especially if there is something like an image with text wrap that might constrict the column width.
A screen capture or two, with non-printing characters showing might help here. -
I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?
I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.
-
I somehow managed to add lines on my master slide and can't get rid of them. I now have a useless rectangle on the left half of many of my slides. How do I remove this?
Select the master slide,
copy any objects you want to keep,
Select all, (command A), and press delete key.
Paste back the items to retain (Command V) -
I have $.08 eight cents left in my account and can not get rid of it to be able to change my account info, what do I do???
You'll need to contact support for further assistance.
https://expresslane.apple.com/GetproductgroupList.action -
I am in my e-mail and a keyboard came up but only the left hand-side of the keyboard and I can't get rid of it, any idea how to make it go away?
Have you turned the phone off? If so, and it hasn't fixed the issue, try a reset:
Press and hold the Sleep/On/Off button and the Home button at the same time for approximately 10-15 seconds. Ignore the slide to turn off indicator, and wait for the Apple logo to reappear. Release buttons. No content will he changed with this process.
Stedman -
I am leaving Facebook. It is insidious and infects most of my communications apps. I can't dele at the app or an email address from FB I never used. I get ask to put my FB password in. Have tried all my passwords, no luck. how can I get rid of it? or how do find ny FB password?
Sorry, the place I need to delete my account is in system. I no longer have an account with Facebook, my 14 days are gone. Yet I can not delete a Facebook address from my account. Will let me remove my real email, but not facebooks.
-
I can't get rid of the 'Remember password for..' box (top left)
When I login to a website (2 sites so far, including this one) and the Remember password box pops up, I can't get rid of it. I click the x it doesn't close..I click 'not now'..'never remember password for this site'..nothing..it wont disappear..If I minimize the window it can disappear until I move the mouse towards the top of the window and it comes back..any ideas?..bug maybe?
Sorry, the place I need to delete my account is in system. I no longer have an account with Facebook, my 14 days are gone. Yet I can not delete a Facebook address from my account. Will let me remove my real email, but not facebooks.
-
Whenever I make a track there is like a minute of track left that I can't get rid of.
I am making a track for a podcast, and whenever I export there is like a minute or little less of track that I can't get rid of. I even used fade out, and it still exports it the same length.
Is there a way to make the track end on a certain measure?velocitycleveland wrote:
Is there a way to make the track project end on a certain measure?
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Crazy gap I can't get rid of! help - please??
Hi - my first time on here (well, needing to be on here..!).
I'm having a heck of a time. I've just been hand-coding a fairly
simple site - which I've now finally gotten around to updating.
The site is:
http://www.arcfoto.com
I'm trying to set it up as a fixed (un-resizeable) console
window with a flexible content pane. So - I've been using
dreamweaver to set it all up. But the problem is that I've got this
really persistent gap that I can't get rid of. It's spans the left
and top sides. (about 10px of white) - in the version you see if
you visit the URL - I've had to add gap to the bottom and right -
just to not make it look TOO WEIRD. But I'd really really like to
get rid of it.
The basic architecture is the following: Javascript window
containing tables to organize content. Nothing special - just
rollovers. A friend suggested I could add CSS commands to get rid
of it. I've been doing a fair bit of messing around with any and
all CSS parameters I could.... but nothing seems to really make a
difference. I'm thinking it's got something to do with the
javascript window definition for the window on the entry page
(previous page). But I really have no idea. I'm HOPING, PRAYING -
that someone here might have a suggestion for a quick fix - or a
fix of any kind...! I've been struggling with this for WEEKS
now...!
Thanks.Martin?
Your PNG files are so huge because you have not properly
exported them from
FW. Just export as JPG images - they'll be fine if you don't
OVER optimize
them, and they'll be MUCH smaller than these are now.
This is a bit hinky -
.style1 {
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
color: #D1CED0;
border-top: 0;
border-left: 0;
border: 0;
body {
background-color: #666666;
border-left: 0;
border: 0;
border-top: 0;
border-top-style: outset;
margin-left: 0px;
margin-top: 0px;
try this -
.style1 {
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
color: #D1CED0;
border-width:0;
body {
background-color: #666666;
border-width: 0;
margin-left: 0;
margin-top: 0;
But the big question is: will it work for me?
It could.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"arcfoto2" <[email protected]> wrote in
message
news:[email protected]...
> Thanks Martin...! That was certainly very gentlemanly of
you. I'm not sure
> how
> my response to the previous got in ahead of yours. No
doubt you started
> the
> reply before I did mine or something.
>
> I felt I really wanted to try going with PNG because in
last years I'd
> been
> having lots of problems with JPGs - artifacts, sure...
but also color
> drift and
> averaging - causing noticeable differences between text
block backgrounds
> and
> the bg itself, etc... but I figured my site was very
minimal, very
> sparse... so
> PNGs were no HUGE sin, considering many people seem to
have loads of SWFs
> all
> over theirs... but that's here nor there...
>
> Thanks.
>
> This is the CSS code I ended up with:
>
> .style1 {
> font-family: Arial, Helvetica, sans-serif;
> font-weight: bold;
> color: #D1CED0;
> border-top: 0;
> border-left: 0;
> border: 0;
> }
> body {
> background-color: #666666;
> border-left: 0;
> border: 0;
> border-top: 0;
> border-top-style: outset;
> margin-left: 0px;
> margin-top: 0px;
> }
>
> Suppose I did it twice, huh? I'm assuming the 'body' one
can come out.
>
>
> ALSO - I'm sure I should really post a separate topic
for this - but maybe
> it'll help cut down on the overall number of topics if I
post it here... :
>
> Not sure if you noticed my redundant links. I have a set
of nav links for
> rollover (since I'm REALLY finicky about typography -
has to be myriad)
> and
> another set of TEXT links which are being pushed out of
the frame (not
> supposed
> to be visible).
>
> The reason I'm doing this is for bot-cataloging - since
it's my
> understanding
> that google, et. al. does not penetrate image links.
Only text - from what
> I
> understand. So - yes, well... it's an SEO trick. I'll
ask you to suspend
> moral
> judgement. But the big question is: will it work for me?
>
> thanks again,
> Jonathan
> -
I can't get rid of this blue border around my artwork after it's published to the web
I can't get rid of this blue border around my artwork after it's published to the web
That did not work.
Here's where I put it. The blue bordeer still show up around the large rectangular image.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Ray Bros., Inc.</title>
<style type="text/css">
@import url("PopupMenuC.css");
@import url("PopupMenuB.css");
@import url("PopupMenu1.css");
body {
margin-left: 00px;
margin-top: 00px;
margin-right: 00px;
margin-bottom: 00px;
text-align: center;
a img {border:none}
.Arial {
font-family: Arial, Helvetica, sans-serif;
.Arial {
font-size: 10px;
.Arial {
font-size: 12px;
.Arial .Arial {
font-size: 14px;
</style>
<script language="JavaScript1.2" type="text/javascript" src="mm_css_menu.js"></script>
</head>
<body>
<table width="1080" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
<td height="279" align="center" valign="top"><div id="FWTableContainer1818523225"> <img name="PopupMenuC" src="PopupMenuC.jpg" width="1082" height="279" id="PopupMenuC" usemap="#m_PopupMenuC" alt="" />
<map name="m_PopupMenuC" id="m_PopupMenuC">
<area shape="rect" coords="899,240,1064,265" href="index-new.html" alt="" />
<area shape="rect" coords="679,240,844,265" href="index-new.html" alt="" />
<area shape="rect" coords="460,240,625,265" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuShowMenu('MMMenuContainer0525123758_0', 'MMMenu0525123758_0',485,265,'PopupMenuC');" />
<area shape="rect" coords="241,240,406,265" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuShowMenu('MMMenuContainer0524224504_0', 'MMMenu0524224504_0',262,265,'PopupMenuC');" />
<area shape="rect" coords="22,240,187,265" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuShowMenu('MMMenuContainer0524221503_1', 'MMMenu0524221503_1',46,265,'PopupMenuC');" />
</map>
<div id="MMMenuContainer0525123758_0">
<div id="MMMenu0525123758_0" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuResetTimeout();"> <a href="index-new.html" id="MMMenu0525123758_0_Item_0" class="MMMIFVStyleMMMenu0525123758_0" onmouseover="MM_menuOverMenuItem('MMMenu0525123758_0');"> RBI-NS100 </a> <a href="index-new.html" id="MMMenu0525123758_0_Item_1" class="MMMIVStyleMMMenu0525123758_0" onmouseover="MM_menuOverMenuItem('MMMenu0525123758_0');"> RBI-M100 </a> <a href="index-new.html" id="MMMenu0525123758_0_Item_2" class="MMMIVStyleMMMenu0525123758_0" onmouseover="MM_menuOverMenuItem('MMMenu0525123758_0');"> RBI-100 </a> <a href="index-new.html" id="MMMenu0525123758_0_Item_3" class="MMMIVStyleMMMenu0525123758_0" onmouseover="MM_menuOverMenuItem('MMMenu0525123758_0');"> Color Charts </a> </div>
</div>
<div id="MMMenuContainer0524224504_0">
<div id="MMMenu0524224504_0" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuResetTimeout();"> <a href="index-new.html" id="MMMenu0524224504_0_Item_0" class="MMMIFVStyleMMMenu0524224504_0" onmouseover="MM_menuOverMenuItem('MMMenu0524224504_0');"> RBI-5V </a> <a href="index-new.html" id="MMMenu0524224504_0_Item_1" class="MMMIVStyleMMMenu0524224504_0" onmouseover="MM_menuOverMenuItem('MMMenu0524224504_0');"> RBI Low Profile AGG </a> <a href="index-new.html" id="MMMenu0524224504_0_Item_2" class="MMMIVStyleMMMenu0524224504_0" onmouseover="MM_menuOverMenuItem('MMMenu0524224504_0');"> Color Charts </a> </div>
</div>
<div id="MMMenuContainer0524221503_1">
<div id="MMMenu0524221503_1" onmouseout="MM_menuStartTimeout(1000);" onmouseover="MM_menuResetTimeout();"> <a href="index-new.html" id="MMMenu0524221503_1_Item_0" class="MMMIFVStyleMMMenu0524221503_1" onmouseover="MM_menuOverMenuItem('MMMenu0524221503_1');"> RBI-MT240 </a> <a href="index-new.html" id="MMMenu0524221503_1_Item_1" class="MMMIVStyleMMMenu0524221503_1" onmouseover="MM_menuOverMenuItem('MMMenu0524221503_1');"> RBI-200 </a> <a href="index-new.html" id="MMMenu0524221503_1_Item_2" class="MMMIVStyleMMMenu0524221503_1" onmouseover="MM_menuOverMenuItem('MMMenu0524221503_1');"> RBI-175 </a> <a href="index-new.html" id="MMMenu0524221503_1_Item_3" class="MMMIVStyleMMMenu0524221503_1" onmouseover="MM_menuOverMenuItem('MMMenu0524221503_1');"> R-Panel </a> <a href="index-new.html" id="MMMenu0524221503_1_Item_4" class="MMMIVStyleMMMenu0524221503_1" onmouseover="MM_menuOverMenuItem('MMMenu0524221503_1');"> Color Charts </a> </div>
</div>
</div></td>
</tr>
<tr>
<td valign="top"><p><br />
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td>...</td>
</tr>
<tr>
<td> </td>
</tr>
</table>
</body>
</html> -
WebElements Can't get rid of border inside iFrame when CR report is loaded
I am runing reports from the CR Crystal report 2008 view that launches from Infoview and I can't get rid of a border that is in the inside of the iframe when the iframe has a CR loaded within it . (I uploaded screenshots here... https://cw.sdn.sap.com/cw/ideas/4288)
The issue isn't with the iFrame itself. When I just throw an WEIframe on a CR report, I can control the frameborder by modifiying the WEIFRAME function's frameborder setting, toggling it on and off and it looks great.
Where I am having problems is when I put load a CR report inside of an iFrame. I changed the ReportMode to weblayout, I've made the report margins to be zero, removed the scrollbars and menubar. Still, I get that pesky inside border.
I've changed the opendoc sReportMode to Weblayout, gotten rid of preview panel, margins in my CR report, removed toolbar and menu bar from the reports and iframe
Today, we went into our BO Server, found every instance of OpenDocument.jsp and added the frameborder ="0" parameter at the bottom of the script to the iframe definition.
After the changes my BOE Admin restarted the Apache webservices.
Is there something else that needs to be re-deployed or re-started??
thanks!
-PamJamie/Ludek --
Hopefully my post will help you help other people having this issue.
Yes, as it turns out, this issue was not related to WebElements, but was an issue with the CR Viewer.
The KB that Ludek referred me to did have code to add to the web.config, but it didn't do a thing.
Ultimately, I found reference to this ussue bug #ADAPT01417734. A fix was first bundled in fix pack 3.1, but it wasn't completely fixed until SP 4.0. (Known Limitations: There will still be a 1 pixel wide border around the viewer even though the toolbar and drilldown tabs are hidden. The fix for the 1 pixel border will be delivered in Service Pack 4.)
Our server is BOXI R3 FP 2.6 and applying service packs is, in itself, a pain and a risk and requires a testing effort that we couldn't afford right now.
So, I patched my own local instance of CR 2008 to SP4.0 and then pulled the files that were identified as 'fixed' according to the release notes to my BO Server and put them in the correct destination folders:
allInOne.js
dom.js
processindicator.js
psheet.js
ReportAlbum.js
ReportPage.js
ReportView.js
Style.css
Viewer.js
OK, it's a hack, but once I did that, ALL of the gray borders around my weIframes went away!! I can still control a nice little border via the frameborder attribute in the weIframe ()
thanks for your help! -
Annoying border, which I can't get rid of in an AP div
Hi,
I have created an AP div in Dreamweaver CS4 on my website and it has somehow grown a second compartment. I don't need this second compartment and have tried for the life of me to get rid of it.
Here is the code:
.twoColElsRtHdr #sidebar1 {
float: right;
width: 210px; /* top and bottom padding create visual space within this div */
font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
font-size: small;
top: 15px;
position: relative;
background-color: #FFF;
background-image: url(_assets/sidebarbackg.jpg);
height: 445px;
left: 5px;
color: #000;
text-align: left;
padding-top: 0px;
padding-right: 10px;
padding-bottom: 0px;
padding-left: 10px;
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
text-align: justify;
font-family: Verdana, Geneva, sans-serif;
The box is the right height and width but there is another compartment in it which I can't get rid of....anyone help?
Tom.Sorry its gone now. No idea what it was but it certainly is part of an AP div which I didn't need.
Thanks -
Can't get rid of a TX - message keeps appearing and being processed by OSB
I have some sort of a poison message or TX I can't flush. Every 10 seconds I get a log message like the second one below, and the number of pending messages in multiple places and OSB proxy service messages processed keep climbing - all without producing any new messages on my part. I've tried deleting the default server store on the OSB managed server and the filestore for the JMS server. No luck.
When this first started happening, the error messages looked like the first one below. Something I did caused the change, I assume. However, it's the same TX ID throughout.
So, first, how can I get rid of this thing? It's driving me nuts and keeping me from closing out a POC.
Second, why is it happening? I have one suspicion - could it be because that somehow we configured mutiple domains with the same name for a distributed application? It's not my normal practice but it happened. These domains don't communicate directly, but there are domains that need to communicate with both. So I'm guessing the name ambiguity may be hurting us. Just a guess, though.
In this case, the sgosb domain's proxy service (this domain name is unique) is receiving messages from a queue resident in the pega_domain in Singapore and another proxy service is putting a message to another queue in the pega_domain in the UK. This is not in a single TX; the first proxy service forwards the message to a queue in the sgosb_domain, the second proxy service gets that message and puts it into the other pega_domain. It's an XA TX for each proxy service.
Just to make it more fun, the sgosb_domain has another proxy service reading from a different queue and forwarding it to a queue in the third pega_domain in the US.
TIA for any help or insight.
Oh yes, the OSB domain is WLS 10.3.4, while the pega_domains are WLS 10.3.2
Original error message
####<Apr 13, 2011 4:32:13 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'>
<<anonymous>> <> <92f54a30d60e6302:-4b6d523c:12f4cfeaabc:-8000-0000000000000123> <1302669133597> <BEA-010026> <Exception occurred during commit of
transaction Xid=BEA1-039B0B6D3D0E77C1B135(1898471720),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=0,seconds left=600,XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=new,assigned=none),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic,
eis/pramati/Queue, eis/sunmq/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1,
WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic,
eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources={})],CoordinatorURL=pega_1+nj09mhm5078:22111+pega_domain+t3+):
javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at weblogic.transaction.internal.CoordinatorImpl_1032_WLStub.commit(Unknown Source)
at weblogic.transaction.internal.TransactionImpl$1.run(TransactionImpl.java:331)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.transaction.internal.SecureAction.runAction(SecureAction.java:72)
at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:327)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:252)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
at weblogic.transaction.internal.CoordinatorImpl.commit(CoordinatorImpl.java:94)
at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error message I'm getting now
####<Apr 13, 2011 4:51:38 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <>
<92f54a30d60e6302:-42808c28:12f4d3173cb:-8000-0000000000000032> <1302670298730> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-0011D0679BA5074B8E12(1930603846),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds
left=60,XAServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=(ServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=
(state=rolledback,assigned=sgosb_1),xar=WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1239571724,re-Registered =
false),XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=rolledback,assigned=pega_1),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic, eis/pramati/Queue, eis/sunmq
/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq
/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources=
{})],CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+): weblogic.transaction.RollbackException: Unknown reason
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.xa.XAException
at weblogic.store.gxa.internal.GXAResourceImpl.prepare(GXAResourceImpl.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.java:380)
at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:2593)
at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:1321)
at weblogic.transaction.internal.SubCoordinatorImpl.startPrepare(SubCoordinatorImpl.java:183)
at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.>Edited by: SteveElkind on Apr 13, 2011 5:50 AMTom,
Thanks! Succinct and easy to understand as ever.
Yup, that covers it - I had also just seen this in the docs after looking at atheek1's earlier response (thanks to him/her as well). It's covered almost as clearly there as you state it here (http://download.oracle.com/docs/cd/E11035_01/wls100/jta/trxcon.html).
While the ESB domains meet all of those requirements (except for cross-domain security configuration), each of the other two sets of domains (3 in each set) do not meet the naming uniqueness criteria for domain and server names; they do for JMS server names. I saw the store names in the TX identifier string as included resource, and assumed they might play a part - that's why I changed them. As you say, an unnecessary change. Oh well - it was an easy one.
My normal practice has been for unique names in the past, due to problems I had years ago with cross-domain JMS traffic in an earlier WLS version. I guess it's the wrong time to have forgotten that lesson.
Does anyone know of a quick way of changing a domain name quickly without rebuilding the domain? In the past WLST resulted in incomplete copies for me, is that still a problem? Server names are easy, just some global search-and-replace in the config.xml file (and in the management scripts, too)
/Steve
Maybe you are looking for
-
TO confirmation for picking: difference between RF and non RF transactions
Hello, I am confirming one TO for picking in a outbound delivery process. My storage location is WM and HU managed and materials are batch managed. I noticed if I confirm TO through RF transaction (LM61), I have the following results per material on
-
I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?
-
Hi, I had a wired network and my Router(Model WRT54G2 with firmware v. 1.0.03) worked fine for a long time until I recently bought and setup Wireless HP Office Jet Printer. After that my Network starts experience problem losing the Internet connecti
-
Error "Transactional Mode" in Universe in View Contents
Hi Experts, I had created a universe connecting to Oracle 9i Database with ODBC and the universe connection is Genric ODBC. I am able to get all the tables in the Universe create objects ect.But when i try to view the table content I
-
I have a Droid from Jan 2010, and at first when I was on a phone call, whenever I would receive a text/sms message, the LED would blink notifying me that I had a message to read. Now, the LED does not blink while I'm on a phone call and it annoys me,