Can't get rid of WORD TEST DRIVE

Brand new iMac, I installed Office first thing.
Did not know that there's a "test drive" version pre-loaded.
Did not discover this until I tried printing, the "test drive" doesn't support printers.
Subsequently discovered that none of my docs will open except in the "test drive" version.
Question: What happens when "test drive" expires in 21 days? Will my docs automatically start opening in the permanent version that I installed with Office? (I can open the docs by first opening the full version and doing "File-open" but that's ridiculous.)
I tried trashing the "test drive" but none of my docs would open until I untrashed it.
Suggestions?
Thanks
iMac G5 Mac OS X (10.4.6)

I have re-installed Office, and Word, per advice, and everything seems OK.
EXCEPT
When I open Word I get this error note:
"An unexpected error occurred trying to load MS Framework Library"
What's this about? How to correct it?
Thanks
iMac G5 Mac OS X (10.4.6)

Similar Messages

How can I get rid of the Flash Drive password?

I have recently purchased a 16Gb USB stick. When I plugged it in (Win 7 Ultimate) it came up as enhanced storage and I created passwords.
Now I cannot use it on Vista or Xp computers. On vista I right clik and select unlock but nothing happens. On XP the it shows up as removable disk and when I click on it it ask to insert disk.
How can I get rid of the password - in win 7 icant have a blank password for it

Hey,
In your case i would contact Toshiba memory support. You can give them a call or write an e-mail, have a look on Toshiba memory page:
http://www.toshiba-memory.com/en/service_support.html
Have you created the password using U3T software? On the same Toshiba page there is a FAQ article how to remove U3T Launchpad software.

Can't get some LCDS ES Test Drive samples to work in Tomcat

I can't get many of the Sample Test Drive examples included
with Livecycle Data Services ES 2.5.1 to work properly with Tomcat
(both version 5.5.25 and 6.0.14). I've tried both on Windows XP SP2
and Mac OSX (10.4), but I get the same errors on both platforms. I
can however get the Sample Test Drive from LCDS to work fine with
the JRun server on Windows (included with the Windows version of
LCDS). I've setup the JRun server in a similar fashion as Tomcat
(see my steps below) and everything works fine. I haven't been as
successful with Tomcat. Can anyone point out where I'm going wrong
with my Tomcat setup?
I am using Java 1.5.0.
Here are the error messages I get when trying out the LCDS
Test Drive examples on Tomcat:
Sample 1 - Accessing data using an HTTP service (after
pressing the "Get Data" button):
[RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032: Stream Error. URL:
http://localhost:8080/samples/testdrive/sample1/catalog.jsp"
URL: catalog.jsp"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at DirectHTTPMessageResponder/errorHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
Samples 3, 4 and 5 all produce the following error:
[RPC Fault faultString="flex.samples.DAOException :
java.sql.SQLException: Connection is broken"
faultCode="Server.Processing" faultDetail="null"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at NetConnectionMessageResponder/statusHandler()
at mx.messaging::MessageResponder/status()
Sample 8 - Data Management Service:
[RPC Fault faultString="Unable to invoke a fill operation on
destination 'inventory' due to the following error: class
flex.samples.DAOException:java.sql.SQLException: Connection is
broken." faultCode="Server.Processing" faultDetail="null"]
at mx.data::ConcreteDataService/
http://www.adobe.com/2006/flex/mx/internal::dispatchFaultEvent()
at DataListRequestResponder/fault()
at mx.rpc::AsyncRequest/fault()
at NetConnectionMessageResponder/statusHandler()
at mx.messaging::MessageResponder/status()
Samples 2, 6 and 7 work fine.
Here are the steps I took to setup Tomcat. I've tried this on
both MacOSX and WinXP:
1. Download and extract Tomcat from tomcat.apache.org (I've
tried both version 5.5.25 and 6.0.14)
2. Install Livecycle Data Services ES 2.5.1 and copy
flex.war, flex-admin.war and samples.war to [tomcat-root]/webapps/
3. Prepare tomcat for Livecycle Data Services by following
the instructions here:
http://help.adobe.com/en_US/livecycle/es/lcds_installation.html
3a. Add Java Open Transaction Manager (JOTM) from
http://jotm.objectweb.org/.
Copy the JAR files from [jotm-root]/lib to
[tomcat-root]/common/lib/.
3b. Create a context file for your web application and
register JOTM using the Transaction element, e.g. for the samples
WAR create a [tomcat-root]/conf/Catalina/localhost/samples.xml file
and add the following lines:
<Context docBase="${catalina.home}/webapps/samples"
privileged="true"
antiResourceLocking="false" antiJARLocking="false">
<Transaction
factory="org.objectweb.jotm.UserTransactionFactory"
jotm.timeout="60"/>
</Context>
3c. Increase the maximum memory to at least 512MB. For
Tomcat, this is achieved by specifying the maximum heap size for
the JVM in the JAVA_OPTS variable in [tomcat-root]/bin/catalina.sh:
-Xmx512m
4. Run the tomcat server ([tomcat-root]/bin/startup.sh for
Mac OS or [tomcat-root]\bin\startup.bat for WinXP) which extracts
the 3 .war files into their respective directories in
[tomcat-root]/webapps/
5. Goto the Samples Test Drive in your web browser at
http://localhost:8080/samples/testdrive/

Thanks Leif,
Yes, set it to the location jndi path.
A piece of info is that the 903 oc4j release notes states that global conn pooling doesn't
work. Infering that the j2ee/home/config/data-sources.xml data sources aren't pooled or ??
I just tested so called local connection pooling, where I edited the data-sources.xml that
gets packaged in the ear, to include the min/max params and re-ran my test.
Still, the AM creates a new conn, it's to a new socket, and closes the conn when done. Causing
each conn to not be pooled, rather opened then closed to the DB box. As verified with lsof and
netstat, checking the ephemeral port # on the DB box side, always changes, meaning it's a
new socket and not an old pooled conn socket.
???? What the heck??
Surely if the AM conn check out / return code works properly, OC4J's pooling JDBC driver would
pool and not close the socket??
Has anywone gotten JDBC Datasource connections in BC4J to actually be pooled under OC4J??
Since I couldn't get this to work in my early 902 oc4j testing, and now can't get it to work
still under 903 OC4J, either it's my config or BC4J AM's code or OC4J?
Any thoughts on how to figure out what's not configed correctly or has a bug?
Thanks, curt

Can't get rid of items that are making hard drive sleepless

I have an Intel iMac with a dead internal drive. I'm now booting and running it off its backup clone drive, an external La Cie Firewire drive. But the drive is constantly cycling, spinning down and spinning up, even when all apps are closed and the iMac seems (and should be) asleep (if the internal drive was doing this and i couldn't hear it, no wonder it died).
I looked in Activity Monitor to see what it's up to when it's supposed to be asleep, and see some repeated entries from outdated stuff- Lexmark Network Services (from a printer i no longer have) and Palm Desktop Background, from a Palm program i haven't used since 2006 and thought was de-installed.
The thing is, i can't seem to get rid of them. It's difficult to pinpoint their exact source thru Spotlight (or Inspect in Activity Monitor), and when i throw what i can trace of them in the trash, i can't empty it, i get a message that says "USB Transport rsrc is in use".
How can i get rid of these items, which are obsolete and might be what is keeping the drive cycling?
I removed a bunch of unneeded items from Login Items, but Lexmark one isn't there. And what is "Transport Monitor" (shows in both Startup Items and Activity Monitor)? Can i delete it from Login items?
Energy Saver settings seem fine- it's set to sleep after 10 minutes of inactivity. It's just not going inactive.
Suggestions?
I'm having to shut the iMac down whenever i walk away from it to keep from hearing all that cycling from the drive (and wondering what it's doing to the drive).

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode, like if it still changes in 5-10 minutes...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it maybe some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed. It also may be Video Card or Airport going bad.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Transport Monitor & Palm Desktop are related...
http://www.intuitive.com/blog/mysteriousapps_starting_in_mac_osx.html

I have a rectangle with the word caption written twice on it which appears on my page and obscures my information - how can I get rid of this please?

I have a rectangle with the word 'caption' written twice on it which appears on my page and obscures my information. How can I get rid of it please?

Can you post the URL so we can test the page and look at its code?

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Settings - general - keyboard - turn off predictive text.

After opening my yahoo mail window, I keep getting a very narrow dialogue box with the words "log into Xmarks" I cannot ... and everything is frozen. How can I get rid of this thing, and what is it? I have to hit CNTRL + ALT + ESC to get rid of it.

After opening my yahoo mail window, I keep getting a very short and narrow dialogue box with the words "log into Xmarks" I cannot ... when it pops up, always upper left of my laptop screen and I try to get into my yahoo mail web page, I get a DING sound and cannot enter it ... everything is frozen. I have to hit CNTRL + ALT + ESC to get rid of it - and then reload my Firefox browser to get back to my yahoo e-mail page ... fortunately for me, Firefox re-stores a previous session ... How can I get rid of this intrusive thing, and what is it? Thanks in advance ... Ted Beaudoin, Welland, ON, Canada

Remove VideoFileDownload and find a downloader that doesn't contain TextEnhance.

I set up a location based reminder in notification last week to test it out. Worked great, but now I cannot get rid of it. It does not show up in any list on the notifications pages, but can be found in search. How can I get rid of this notification?

Last week I set up a location based reminder in notifications to test it out. Worked great. However, I can't get rid of it. It does not show up on any of the pages, either reminders or completed. I can search and find it, shows it should be in reminders page, but it is not there for me to remove. Any ideas?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

There is a particularly intrusive BMW app advert that pops up when playing Words with Friends that I can't get rid of. There doesn't appear to be an exit option (most unethical). Any suggestions on how to get rid of the advert out ther?

There is a particularly intrusive BMW app advert that pops up when playing Words with Friends that I can't get rid of. There is no exit option (most unethical). Any solutions for getting rid of the advert out ther?

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How can I get rid of the added / preset text words included in my text messages. It always says something like "Please call back at

How can I get rid of the added / preset text words included in my text messages. It always says something like "Please call back at ###-####."

JenJenTen,
I understand that having a preset text that you did not want can be a bit frustrating when sending out text. To clarify, is the preset message like a signature at the end of your text? Does this only happen in text messages or when your send emails also? Is your SMS delivery confirmation on? Messaging>Settings>SMS delivery confirmation.
LindseyT_VZW
Follow us on Twitter @VZWSupport

How can I get rid of an exasperating Wikipedia balloon which pops up with a dictionary definition of a random word it chooses? Thanks!

I'm not sure whether or not the cursor activates this problem as it happens to pass over a word that wikipedia is programed to respond to w/ this definition balloon--it happens too fast for me to back track and figure out what i might have done that triggers its appearance. Seems random. No X to close balloon. Sometimes clicking cursor outside the balloon shuts if off...sometimes i can't get rid of it.Random occurrences of balloon but enough to be annoying.NOTE! Just now in hilighting "trouble shooting info" from Help menu, a balloon appeared w/ 4 icons:google, search Wikipedia, search duckduckgo and search surf canyon. This balloon appeared when the cursor went over the hi lighted text...it's like the Wikipedia dictionary definitions balloon i get when i'm reading online text! Connected?

Hello, I had this problem also. In Firefox 7.0.1, go to Options -> General -> Add-ons Manager -> Options -> Fastestfox Options and Uncheck "Show popup bubble" Worked for me and got rid of those annoying bubble.
I don't know if it will work in v 3.16.x
Good luck

Help my hard drive is being taken up by about 200gb of "other" memory, i am running time machine on an imac does does cause the problem how can i get rid of all "other" memory

my problem is that most of my imac hard drive is being taken up by 200gb of "other' memory
i am running time machine does this contribute
how can i get rid of all "other" memory
thanks

JKOL96 wrote:
i am running time machine does this contributex
Some, possibly, but shouldn't be a problem.
how can i get rid of all "other" memory
Much of it is OSX and other things needed to run your Mac.
See The Storage Display for an explanation, and don't miss the link to Where did my Disk Space go?

HT4009 Whenever I go to make an in-app purchase, a message pops up saying "this is not a test user account." What does that mean and how can I get rid of it so I can purchase things?

Whenever I go to make an in-app purchase, a message pops up saying "this is not a test user account." What does that mean and how can I get rid of it so I can purchase things?

Try a soft-reset and see if it works after your phone has restarted (it seems ot have fixed the error for a number of people on here) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

ClamXav detecting phishing email (can't get rid of them)

I received an email from my wife that she did not send me. It was an email that made no sense. It just had a bunch of words in a very long document. I assumed that her email program (Mac Mail) must have become infected with something that sent this email out to everyone in her address book. I deleted the email and downloaded ClamXav to check my system and make sure everything is ok.
Whenever I run ClamXav, it detects 8 files with the following infection name: (Heuristics.Phishing.Email.SpoofedDomain)
I ask ClamXav to quarantine the files, then I go into that folder and delete them. But if I run a check later, those 8 files are back. I can't get rid of them.
I'm wondering if they are reinfecting my Mac Mail program via Apple's mail servers. I'm not sure if all my mail messages are kept on Apple's server, and them somehow these malware files get re-downloaded to my computer. I tried to figure out if there is a setting in my mail program that allows me to uncheck a box that says, "save mail files on server".....but I can't find any such setting. I thought I remember seeing something like that in the past.
Does anyone have any idea what is causing my computer to be continuously reinfected and what I should do about it? I don't notice any problems with my computer, but obviously these files that I can't permanently delete has me worried.

Randall Olson1 wrote:
Whenever I run ClamXav, it detects 8 files with the following infection name: (Heuristics.Phishing.Email.SpoofedDomain)
I ask ClamXav to quarantine the files, then I go into that folder and delete them. But if I run a check later, those 8 files are back. I can't get rid of them.
First, I would encourage you to come to the ClamXav Forum to more quickly and efficiently answer questions such as this.
My standard guidance for handling reported e-mail infection is as follows (pay particular attention to #6):
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

Can't Get Rid of Green Screen in Vlog-it

I am fairly new to vlog-it.
I have been messing around with it and so far the video and voice wont sync up.
Also, I can not get rid of the green screen. When I do a test run, my audio comes through but all I see of the finished product is a blank green screen....I do not have v screen on...I have looked and looked for a setting to turn it off, but I have not found it.
HELP
Sam

Hi,
Pic first
Handle = Screen Name.
Name = Your Details as per your My Card (Head and Shoulders iCon) in the Address Book - Or the User that is Logged in to the Mac.
Each Buddy List will show the same Name but a different Handle based on the Screen Name for that Buddy List.
If you only have one Buddy List (other than the Bonjour One) and you Delete it then the Buddy List Disappears - Problem Solved. (Presumably you are re-adding a New Screen Name ?)
Pic of the Minus Button I am talking about.
Multiple Buddy List are created by adding more then One Screen Name to the Accounts List (Previous Pic)
I am a little confused where you were when you did this:-
I tried clicking on the minus sign in the list of users to delete the account and tried signing up for a new iChat account using my AIM screen name/password;
"List of Users" sounds like you were in System Preferences > Accounts.
You can "Delete" an Account here. It is not actually removed from the Users Folder (Hard Drive/Users) but is locked in a way that no-one has access and they are Removed from the Login Screen when the Mac Starts Up.
DO NOT DELETE ANY CLOSED ACCOUNT FOLDER In the Users Folder.
But if you use the same Screen Name in another Mac User Account the same Handle will appear.
You will see my GoogleTalk Account is headed "GoogleTalk" and my AIM Account as "Main AIM Account" These are set in the Description field in the iChat > Preferences > Accounts.
The Default if you have one account that logs into AIM is for it to read "AIM Buddy List"
Similar for one Jabber Account.
With more accounts of any one type they take on the info in the Description Field - which itself by default is the Screen Name.
Are you trying to create a New Mac User Account and use the same AIM Screen Name there ?
Are you trying to just change AIM Screen Names ?
8:05 PM Wednesday; December 29, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Can't get rid of WORD TEST DRIVE

Similar Messages

Maybe you are looking for