Can't get Run Time Prompts to pop up in Planning 11.1.2.1 on WebForm

Hi,
Client is using Business Rules and not Calc Manager. I have a Webform that has a Business Rule attached with only Run on Save selected. In the BR there are various RTP's user needs to choose. When I navigate to the WebForm in the bottom left hand corner I don't see any available BR's. That is first clue it won't work? When I hit save, nothing pops up to select and only the message 'The data has been saved successfully' appears. Nothing about the rule has run successfully etc. I have provisioned the group I'm in with 'Validate or Launch' Access to the BR in question.
Within EAS when I goto launch or validate the rule, the Run Time Prompt box pops up and allows me to make my selections but not when I hit Save on the form.
Any ideas? Could it be a provisioning issue? My username is an admin.
Stumped as I haven't done this in a while without Calc Mgr thus am I missing something obvious?

OK. Possibly onto something here. On the left hand side of the Business Rule tab there are all the calc scripts. Then only Bus Rule that appears there is a new one I created that was an exact copy of the Business Rule in question, just with a '- New' appended to the end of the name. Funny thing is both Business rules that are attached to the form do appear on the right hand side. Thus how could that be? How does one get the Bus Rules to appear on the left hand side? Haven't been in EAS Business Rules mode for a long time.

Similar Messages

  • Run Time Prompt - showing alias instead of member name

    We have a Capex Planning application that uses right-click menus to launch business rules with Run Time Prompts. We are using Planning 11.1.2.1. Even we the alias table set, when opening the RTP it pulls in the member name rather than alias.
    There is an Oracle KB article (Show the Alias name in the Business Rule Run-Time Prompt [ID 857832.1]) that has this solution:
    Take the following steps to add the alias name to the run-time prompt along with the member name.
    1. Log in to planning web.
    2. Navigated to File >> Preferences >> Application settings.
    3. Select Show Alias in Member Selection and change the option from no to yes.
    4. Save it.
    But in 11.1.2.1, there is not option for "Show Alias in Member Selection" under Planning Preferences.
    We have an SR open, but figured maybe someone else has run into this issue as well.
    Does anyone know how to get the aliases to show on a Run Time Prompt rule in 11.1.2.1?
    Thanks for your help!!

    Deleting and rebuilding the dimension in the outline will enable you to build the members in the order you may desire if the file is in a given order.

  • About run time prompts

    Hi, i need to know how can we create run time prompts for business rules in system 9

    Hi,
    Open EAS, expand the business rules node, expand the repository view node and you should see a Global Variables node. Right-click and do new variable. Here you can create the variable. Under usage type you can select Runtime prompt.
    Once your variable is created you can reference it in a business rule by right-clicking withing your business rule.
    Gee

  • Members on rows, can they be passed to run-time prompt in a business rule?

    Hi!
    I have a input form which has a business rule with properties "Run on Save" and "Use members on Form".
    The business rule has run-time prompts (local variables) as follows (showing only the fix part of br...)
    FIX ([V_Year],[V_Version],[V_Scenario],@LEVMBRS ("Offering", 0),[V_Entity],
    [V_ICP], [V_Account])
    calculation...
    endfix
    Now my accounts are on rows and I would like pass those account members to the [V_Account] variable through run time prompt. The [V_Account] ís a local variable with Type "Members" in Account dimension. I have also selected 0-level accounts as limits. Other dimension members from page/pov seem be passed successfully to run-time-prompts.
    The run-time-prompt does not seem to be able to catch those account members on rows? Is it at all possible to pass members on dataform rows to run time prompts?
    kind regards,
    user637777

    Hi!
    Thanks John!
    I just have live with that and find another way to restrict the calculation regarding those accounts.
    kind regards,
    user637777

  • Run Time prompts

    Is there a way to input TEXT string in HBR run time prompts using Global Variable (type string) and to save them against accounts(data type text) in Planning 9.3.1?
    In BR the assignmnt is
    Account_Name=[Global_Variable];
    I think this is the issue as I am asigning a text to account using "=" operator.
    The entered text is not getting saved for me. Please help.

    Hi,
    Unfotunately that's not possible, not only in 9.3.1 but also in later versions. You can alternatively use smart lists but of course that's not the same thing.
    Cheers,
    Alp

  • Sequence will not validate with run time prompts in business rules

    I am in Hyperion Planning v 1.1.1.3, with Workforce initialized. I am creating a sequence of business rules. The rules use run time prompts within them and validate when used on their own. However, when I insert them in a sequence the sequence will not validate, apparently due to the run time prompts.
    The sequence returns the error: Cannot calculate. Essbase Error(1200323): Error parsing formula for [FIX STATEMENT] (line 7): expression expected after [(].
    Line 7 in the business rule is as follows:
    FIX ([rtpYear],[rtpScenario],[rtpVer],[rtpCC],[rtpBU],[rtpEmp])
    The problem is not isolated to this business rule, it occurs with any rule I try.
    Can sequences function with run time prompts in the included business rules?
    Stephen

    I have figured out that if any rtp is hidden in the business rule, the sequence will not validate. Is this expected behavior for sequences?
    Additionally, hiding the variables in the sequence has no effect if the variables are not hidden in the rule. When launched from a menu in a web form, the user is prompted for values for all variables (except for the Execution Database Name) although they are prepopulated based on the members in the POV, Page, etc. Is this also expected behavior?
    I also find that it won't validate if "Merge launch variables" is selected (I have included rules associated with different plan types and with different dimensionality, so this may be expected). The user is prompted to provide values for every variable in each rule in the sequence, many of them duplicates (though, again, they are prepopulated based on members in the form).
    Stephen

  • Getting run time errors while executing the copied SAP programs

    Hi folks,
    i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
    i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include  programs.i am copying them to z programs like
    RQ00MF10 copied to z_RQ00MF10
    RQALVF14 copied to z_RQALVF14
    RQALVF16 copied to z_RQALVF16
    RQALVTOP copied to z_RQALVTOP.
    now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
    <b>runtime error---</b>
    The termination occurred in the ABAP program "Z_RQEEAL10" in           
    "SELECT_FIELDS_MANIP2_F16".                                           
    The main program was "Z_RQEEAL10 ".                                                                               
    The termination occurred in line 257 of the source code of the (Include)
    program "RQALVF16"                                                    
    of the source code of program "RQALVF16" (when calling the editor 2570).
    --Error in ABAP statement when processing an internal table.  
    --When changing or deleting one or more lines of the internal table         
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table   
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as                  
    the line index. An index less than or equal to zero is not                
    allowed.                                                                               
    The error can occur when using the following options:                     
    1. "INDEX idx" for specifying the line number in the table                
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"                                 
       where you want to change, insert or delete.                            
    2. "FROM idx" for specifying the start index when deleting a line         
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                
    3. "TO idx" for specifying the end index when deleting a line             
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                                                               
    When the program terminated, the table had 2 lines.                       
    these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
    Thanks & regards

    Hi Madhu,
    I will give you one more check point where you have to give your concentration while copying the standard programs....
    Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
    one more is also here
    You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
    ~~Guduri

  • Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

    Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

    Hello.  I have AV player hd.  When I touch and hold the Quicktime icon that is in a received mail message, a prompt comes up "Open in AVPlayerHD".  I click on that and a black screen opens up with the following on it:
    1--A red line at the top with a short white slider button on the right hand side.  There is a time listed at each end of the red line that says 00:00
    2--On the left hand side of the screen, near the middle, there are 4 icons, a colored 'x', a dialogue icon, a circular arrow and an 'i' in a circle.
    3--On the right hand side there is a + and a - sign with '1.00x' in the middle of the two.
    4--At the bottom of the black screen is a play icon plus forward and fast forward icons.
    When I press the play icon it changes to a stop icon.
    So, even though I have AV player I cannot play this Quicktime slideshow.
    Any help would be appreciated.  Thanks.

  • Using run-time prompts in BRs for Planning 11.1.1

    Hi to all!
    I want to create a run-time prompt for periods for which the calculation is to be done in my business rule. So via Tools>Variables I created a global variable of MemberRange type, then I inserted this variable in the Fix statement of my business rule in Calculation Manager but the validation of the rule fails stating that the BR has a run-time prompt which is not allowed. I have not found anything in the documentation on how to allow runtime prompts in a BR, so I would be very grateful for hints on how to correct it.

    Hi,
    For global variables:
    Run EAS console
    Right click on your Essbase server (e.g. localhost)
    Edit - Variables
    Set names and values of global variables for all apps and all dbs (if you need so)
    These names of global variables you can use in your BRs and CalcMngr scripts.
    For local BR variables:
    Run EAS
    Create new BR
    Go to "Variables" tab
    Add local variables as "Member" type / "Run-time prompt" usage type
    These names of global variables you can use in your BRs scripts.
    For global BR variables:
    Run EAS
    Open BR - Global variables
    Create new global variable as "Member" type / "Run-time prompt" usage type
    These names of global variables you can use in your BRs scripts.
    Edited by: Antony NoFog on 08.02.2010 18:05

  • Hide run-time prompt in composite data form in 11.1.2

    Hi, I am using Planning 11.1.2, and the rule with run-time prompt I attached to a composite data from can't execute successfully when I selected "Hide Prompt" and "Use Members on data form". It says "An error occurred while attempting to run the following business rule on save". But if I set this rule to be run on save in a single data form, not a composite one, the rule could be run successfully. Is this a bug or does anyone know how to solve this? Thank you.
    Regards,
    Jerry

    Hi, I had the same problem and I did a Service Request to Oracle. This is a bug. Unfortunatly, I do not think there is a solution to fix this problem.
    The 11.1.2.1 version fixes this bug.
    Virgile.

  • Run Time Prompts on Smartview

    Hi
    Wondering if anyone can help
    When submitting data via opening a data form on smartview a prompt appears asking wether you would like to run the associated business rule. However when you run a business rule through planning a run time prompt appears (e.g which week would inflationary increases apply from) asking for additional information.
    This prompt does not appear when running the associated rule through smartview is there any reason for this? Do I need to change a setting in smart view?
    Thanks in advance for your help
    Harman

    HI Amol
    Thanks for the reply
    This prompt has been set and is still not prompting when running the business rule through smart view
    Cheeers

  • Kp26 getting run time error  in program "COCC2009 "

    Dear all
    Im getting run time error massage once the KP26 running . "The data object "ITDAT1" has no component called "TXTUPL", but there is a component called "TXTUP".
    The following syntax error occurred in program "COCC2009 " in include "RKCCAI02
    We are working on upgraded system. please hep me to solve this issue.
    Regard,
    nawa

    Hi
    I am using ECC 6.0 and when I checked the field mentioned TXTUPL, it is available there.
    Can you check the COCC2009 program whether the field is there or not.
    Shiva

  • Getting run time error for multiple counter plan

    Hi Friends,
    Its very critical issue,wherein i am getting run time error for multiple counter plan.
    Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
    Please find the screen shots for your reference and please let me know how to fix the issue.
    Regards,
    Srinika

    Hi,
         Please check reason for update termination in Transaction code SM13.

  • Getting run time error while calling smartform

    hi,
    i am getting run time error of "maintain output device in your master data" while calling smart form.
    p_output_options-xsfcmode = 'X' .
      p_output_options-xsf = space .
      p_output_options-xdfcmode = 'X' .
      p_output_options-xdf = space .
      p_output_options-tddest = 'LP01'.
      p_output_options-tdnewid = 'X'.
      p_output_options-tddelete = SPACE.
      p_control_parameters-no_dialog = 'X' .
      p_control_parameters-getotf = 'X' .
      p_control_parameters-DEVICE = 'PRINTER'.

    Hi Neha
    Your program looks out for the default printer configured against your user (Check SU01 : Constant tab ). You dont seem to have maintained it properly as a result of which you get this message. You will have to configure your printer device to overcome this error.
    Choose menu: System -> User Profile -> Own data.
    On the Defaults tab, give LOCL code for the output device.
    You can also check the output device setting in transaction SPAD.
    Regards,
    Uday

  • Business Rule err The following value is not valid for the run time prompt.

    Hyperion Planning v 9.3.3
    I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
    The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
    If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
    The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
    The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
    What am I doing wrong - I have tried restarting the Planning service and the EAS service.

    My preferred method of doing this is:
    1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
    2. On the form, have business rule set to run on save, use members on data form and hide prompt.
    Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
    Deanna

Maybe you are looking for

  • Getting error while creating a table

    Hi there, I have created a user 'ram' and gave "create table" permissions for that user. After that, when I tried to create a table using the command create table countries as select * from hr.countries; where hr is another user and countries is the

  • Is there any way to have a message sent at a specific time?

    Greetings: I am trying to figure out if there is a way to send an email to someone (not my own address) at a specific time on a specific date? Essentially I want to compose the email but only have it sent at midnight on December 1. Thanks in advance.

  • Connecting laptop (XP) to Yoigo with 6310i (open)

    From a Bluetooth DUN icon I can get the phone to start to access the network. In 'Navegador' mode (wap browsing, I think, this is a Spanish service) it works fine, so I have money on the SIM card and can connect via my phone without Bluetooth. So Blu

  • Payslip Programme unable to read beyond a certain Point(points guaranteed)

    Hi My client is unable to get the payslip  for employees beyond a certain period.I have used Transaction SARA and PC_PAYRESULT but still unable to find out the real reason.My questions: i.How do I find out till how much the data is archived? ii.Is th

  • New file adapter

    Hi, I need to create a new file adapter. I've read some documentations that say PCK could be used. Is that mandatory? I've also found some code sample. But I still don't know what to modify in a the sample nor how to deploy my new adapter in order to