Can't get Shared items to appear in Sidebar
Up until yesterday I have been screen sharing two computers on my network. I would go to the "SHARED" category in the Finder Sidebar and select the other computer. Now I can no longer see the "SHARED" category.
I have gone to the Sharing item in the System Preferences and reset the permissions, etc in the File Sharing and Screen Sharing categories.
Still no luck!
You shouldn't need to reset permissions. If it is not showing, try turning off file/screen sharing, and then turn it back on. Permissions are not going to affect the share showing you your sidebar.
Similar Messages
-
I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
JaxxdiggsPersonally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC -
How can i get my items to stay in place and not cross over each other when readjusting the browser s
How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advancePlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.
softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree. -
Question: how can I get an item in my itunes library, on my mac os 10.6.7 that has a broadcast icon next to it into MP3 format so I can play it on my ipod? right now it won't let me, and it's very frustrating!!!! thanks
I might have misunderstood what you mean by the "broadcast icon," but if you are talking about an audio stream, then there is just no way you can convert a stream to MP3. What this would involve is either recording the stream, and then you would just be replaying the recorded audio on your iPod (is this what you are trying to achieve?), or reading the stream directly on your iPod, which an iPod nano does not support (it would need wireless connectivity).
Hope this helps -
i have an iMac and iPhone 4s i also have ringtones as an app i am also an match user with the cloud how can i get a ringtone to appear in my library to use on my phone
Oh nice, there's a PassKeeper application for the iPhone and iPad. Simply install it and it should talk you through steps, otherwise their website is probably a great place to check.
http://itunes.apple.com/us/app/passkeeper/id405021740?mt=8
I really like the application 1Password, and it works across all the products, Mac, PC, iPad, iPhone. -
My phone froze and deleted two items in my reminders. How can I get those items back?
I was writing some notes in my reminders and my phone froze for a second. When it unfroze I notice it had deleted two of the items I wrote in my reminders. How can I get those items back?
They are only where you put them, if you did not download them on the computer or transfer them from the iDevice, there is no logical expectation for them to be on the computer.
Downloading past purchases from iTunes -
How can i get the time to appear on my stored data in notepad
Hi all,
I was wondering how can i get the time to appear on my stored data in notepad? I saw an example before but i forgotten which example was it.. Any ideas??
holla
Attachments:
TextFile1.txt 3 KBHi
Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
holla
Attachments:
Testing1.txt 1 KB
Untitled 231_LV80.vi 23 KB -
I can't get my iphone to appear under devices within itunes, my iphone appears as my ipod under devices therefore I am unable to sync my music etc onto my iphone. any suggestions???
iPhone 4S and Windows XP the first thing that jumps to mind is that the iPhone 4S needs a USB 2.0 connection to sync with iTunes. Check your computers user guide to see if the PC has a compatable USB 2.0 input.
-
I can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear
# Question
i can only get my bookmarks to appear in safe mode when starting firefox normally they do not appearExtensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]
-
I purchased an iPad air and chose a backup from my iPhone 5s. The only issue is only 30 of my photos downloaded to my iPad and none of the music. How can I get all items on the iPad?
you are using I tunes as the middle man for this back up, right?
When you plug in the pad to i tunes, give it a unique name, like my pad. I tune may be thinking it is talking to your phone. It will keep track of what you what on each device. Then plug your phone back in, and make sure your photos are uploaded to the computer - in i photo if you are using a mac, or in whatever photo program you are using on a windows device. You also want to make sure you have uploaded to the computer all of your music.
Once you get all that stuff there, plug the pad back in, and go through each of the tabs - selecting the music, photos etal that you want on the pad, then resync. -
Puchased items in my watchtime app will not restore to my ipad (1) after an ipad restore. The items appear ready for purchase. how can i restore the items.
Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.
-
Can't get shared Gmail calendars to work (Exchange)
Long time Android user bought an iPhone 5 last night. Having serious trouble getting shared Google calendars to display.
I have my Google account set up as Exchange. That seemed to go through smoothly and my main Google calendar shows up just fine. I then went to https://www.google.com/calendar/iphoneselect and all of my calendars appear. I put checkboxes in the ones I wanted to sync to my iPhone, but they did not show up in my iPhone Calendar app. Waited and waited, never showed up.
I even deleted my Exchange account completely and re-added it. Still, only the primary calendar shows up in Exchange.
Any help would be greatly appreciated.
I've been to that iphoneselect website from both my iPhone using the Safari browser, and from my computer using Chrome browser, and both browsers show the calendars I want to sync as having check marks in the boxes. Those calendars simply do not sync. Is there possibly some issue with Google not being aware that I have an iPhone since I had an Android for so long?
If I go to m.google.com/sync from my iPhone browser, it does not show up with a device select page. It just shows up with a generic Google sync page, where I can click a "Calendar" icon, then choose "Sync with a mobile device," then choose "Apple device" and it takes me to a settings page that ultimately leads me to the same check box webpage ashttps://www.google.com/calendar/iphoneselect. Which, as I said, already shows check marks in the calendars that I want.
I read this entire thread: https://discussions.apple.com/thread/4310898?start=45&tstart=0. It seems to suggest that Google or Apple is making it so you cannot get shared calendars using Exchange any more, and that you have to do it by setting up a new account for calendars as just a regular "Gmail" account (instead of Exchange).
Anybody know how to fix this? Is it not possible to view multiple calendars using Exchange anymore??I was able to get my shared calendars to show up in my iPhone Calendar list only after visiting https://m.google.com/sync/settings/iconfig/ in the iPhone Safari browser. That page lets me manage the Google Sync devices (e.g. iPhone, iPad), each has its own Settings page where I must click the checkbox to sync each shared calendar. Once I saved those device-specific settings, I was able to see the extra calendars on the iPhone.
-
InDesign CS4 Library- can't get library items on to pages
I'm fairly new to InDesign CS4.
A book I'm reading has a tutorial telling me to drag library items from the library to a page.
This is a library that the book author created that came with the book.
However, I can't get material from the library to any of the pages.
Anytime I try dragging any of the images or other items from the library to my page in InDesign CS4, I get a small "No" symbol (a circle with a slash through it).
So I clicked on the image in the library that I wanted to add to the page, and using both the content menu (and later, the library panel's menu) to select "Place Item," nothing happened.
How do I get content in a library on to a page?
Dragging and using "Place Item" are not working for me.Hello, Lee Sarah, and thanks for answering.
If I understand you correctly, this is what I did:
I "right" clicked on the Library file icon on my hard drive, called "Healthy Pets CS4."
This brought up a context menu.
From there, I went to "Properties."
Under "Properties" > "Attributes," "Read only" is not checked off, nor is "hidden" checked off.
In the "Healthy Pets CS4 Properties" dialog box, I then clicked on the the "Security" tab, which brought up all sorts of stuff about permissions, read /write, etc.
I guess I should mention at this point that I'm on a computer running Windows Vista, since this might be pertinent to my issue (?)
Although it's my computer, it has me on here as two different people (I'm on as Administrator and under my first name, which let's just say is "Graphics Cuddly Bear.")
On the "Security" tab page of the dialog box is a heading called "Group or user names," and from there, depending on which name you pick from the user names, different options get high lighted in the ""Permissions for Authenticated Users" box below it.
So, under "Permissions for Authenticated Users" (when the users "Autheticated Users" and "Admins" are selected) the following are checked off with a check mark,
(as if to say, "These are the things you have permissions to do with this file"):
Modify
Read and Execute
Read
Write
The only things I do not have permissions for when I check off "Administrator" on that list is "Special Permissions."
When AU (Autheticated Users) is checked it says I do not have "Full Control" or "Special Permissions."
However, when I clicked on my name (GCB - "Graphics Cuddly Bear") under the heading of "Group of user names," these two things are the only ones checked off:
Read and Execute
Read
So I went in to another area of this box and gave my account ("GCB") the "Write" ability.
When I went back to the box, a check mark next to "Write" then appeared. So it appears to be telling me that under GCB, I can now write to that file.
So when I opened and closed out of InDesign and re-opened it, it still will not allow me to drag the files/text/images from the library.
I still get the little "No" symbol.
It also still will not let me use the "place" command, either.
I've gone ahead and worked thorugh this chapter without being able to use the author's library items, but it makes working on her tutorials very difficult.
And it's rather pointless, since the entire chapter is about how to use the software's library.
I got a response from the book's publisher (Delmar / Cengage) to ask them for help, if they would provide me with working copies of the files, or some other work around, and they were NOT the least bit helpful.
A representative from Delmar/ Cengage e-mailed me to say that because I purchased the book at Amazon's site (rather than from them directly) that they would not help me, which I thought was cruddy and not classy.
I don't see that it entirely matters where I bought the book from; they're the ones who made it. -
How can I get still photos to appear in menu templates?
I can't get photos to appear in the menu templates in Premiere Elements 11, whether I drag them in or Browse them out. I tried two different templates, and 5 different photo file formats. From what I'm reading online, this is a known bug that has been around since v. 9. How is that possible that a major element of a top-of-the-line video editor doesn't even work? Is there a bug fix or a workaround?
Hi ATR,
Thank you for your kind response. Now that I’ve calmed down some, I’m willing to keep trying, to a point at least. I’ll try responding to your questions.
I failed to mention that I did update to 12.1 before my last failure. And I still had the problem. So far, I have only deleted the Prefs file and not the entire folder, mostly because the program went into permanent crash mode and I couldn’t even get it to run, let alone try editing my project. That’s when I reinstalled it.
The project is simply a PowerPoint presentation with a soundtrack, which I exported from PowerPoint as an mp4 file. It’s only 7:30 minutes long. So it’s a very tiny file. There is only one menu page and no scene menus.
Yes, I have successfully burned it to disk, once with the gray rectangle on the menu (to confirm whether it would show as a gray rectangle on the TV screen, which it did), and once with the picture on the menu, the one time I succeeded in getting the picture to appear in the menu.
I have tried the picture in multiple image formats, but the one I mainly try is a .bmp that PE generated using the snapshot tool, or whatever it’s called in PE. I figured if PE won’t even load images it created, the Adobe programmers need to start back with square one.
Maybe you are looking for
-
HP Pavilion g6-2230ew Start-Up Test and Hard Disk Short DST: Failed
Hello community, As you can see, my notebook model is HP Pavilion g6-2230ew. I bought it one year ago, and it keeps freezing and hangs for about few months. I've searched what i could do and I did a Start-Up Test to check if its the hard disk problem
-
This notification pop-up appears almost every time I navigate to a new page which is really annoying when I am trying to study my university subjects online.
-
Call a PAL function within a view in HANA?
Hi community! Does anyone know how you can integrate the call of a PAL function (e.g tripple exponential smoothing) into a HANA view? I guess this must be achievable in a CE Script? Business scenario: we would like to show a time series based predic
-
More than 1000 photos on photo stream?
Is there a way to add more than 1000 photos to photo stream?
-
Hi, At present my client is not integrating payroll with PA, however they want to maintain the IT0009 to capture the bank country, bank key,a/c number, payment method and payment currency globally. What are the steps I should take to maintain this i