Can't get skype to work in other mac system accounts

we have created multiple accounts on our imac and for some reason skype will only work on mine. Any ideas how to get it to work in other people's accounts? We all have basically the same setup. skype error message is about network access but I'm on the internet in these accounts without a problem. anyone have any ideas? thank you!

Compare the Services in the Sharing Pref Panes of the users, Ports 80 & 443 at least are needed for Skype.
Turning on Personal Web Sharing for those Users should open those ports.

Similar Messages

Can't get Cisco to work on my Mac?

I can not get Cisco to work on my Mac OSX 10.9.4
I found this link on someone else's post about this same issue
https://mega.co.nz/#!tlghxQoZ!I0VV1Th9pgiFMQagfG7LbHLvT8xT5uyKo8CrPAX5f9U
Several people said that it worked for them but the last is in 2013 so I'm not sure if its older Mac OS systems
I can down load and install fine but when I go to open it I get this error message
ERROR! cannot write to Info.plist, there are permission problems, or you are on a read-only volume.
This cannot run from within a read-only dmg file.
But when I go to "get info" the program says i have "read and write" permission?
I'm lost and new to Mac, can someone help me please?

The Cisco VPN client is notoriously lousy. Use the built-in Cisco client if at all possible.

Skype does work on my Mac(Facebook account) but i ...

Skype does work on my Mac(Facebook account) but i can't get Skype to work on my Iphone as well I really would like synchronity on both my Mac and my Iphone
changing everything is a problem because i've memory issues
Used to have an primairy email address that worked but that mailaddress is no more in use!!!
Tried to change that in a new primairy email address but this is impossible!?...
Keep my Facebook account in connection with Mac and Skype as it is with including my Iphone too as well
If one can't change his or hers primairy mail address in that is in use
How can I find any use for Skype when i'm not there and traveling!?
I've tried to explain this issues but can't get in touch with Skype to solve this
Yesterday they send a mail to my primairy mail address that is not in use!?!?...

Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
or
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Can't get skype to work on mac partition but works on windows partition

i can't seem to get my skype to work on the mac side. it works fine and i've tested it on the windows side (windows xp) but it doesn't work when i'm logged into the mac side.
any suggestions?

Do you have the mac version of skype ? the version of skype that is for mac downloaded on your mac partition?
I am using skype just fine on my mbp, but i am not using windows on my mac. Just curious-

I can't get java to work on my Mac. It is installed and enabled. I can't activate java per site because I don't get "click here to activate" box.

I can't get java to work with Firefox on my mac with OS 10.6.8. I did everything suggested and still no luck. Java is installed, enabled, and updated. I can't even activate java per site because I don't get the "click here to activate" box for some reason. Apple support said it's a firefox problem and they can't help me. I need to be able to use java!

hello, please update firefox to the latest version & your OS to 10.6.8.
[[Update Firefox to the latest version]]
http://support.apple.com/kb/HT4561

Can I get airplay to work on other applications than Itunes on my Macbook Pro?, How

How to get airplay to work on macbookpro, on other applications than Itunes?

How to get airplay to work on macbookpro, on other applications than Itunes?

HT5372 can't get iCloud tabs working on my Mac

How do I get iCloud tabs working again on my Mac. For whatever reason, they aren't showing up.

Have you tried everything in the document you came from
iCloud: Using and troubleshooting iCloud Tabs ?
The only other reaon I can think o,f that may be preventing the iCloud tabs from showing on your Mac may be, that you enabled "Private Browsing". Is that turned on in the Safari menu?
Regards
Léonie

Can't get Skype to work. No one from Skype replie...

So I quit out of Skype by accident and couldn't remember my password.
I get sent a code which says it doesn't recognise me on the database and yet I am still logged in on my phone and works fine.
It sends me to the Support page where it asks me to log in which is my initial problem in the first place.
I have tried to contact skype numerous times over facebook and they have ignored my questions.
I have had to log in using my hotmail account but I want to use my old one as it has all my contacts.
Moderators of Skype, my skype name is rookster79 and I'd appreciate some help please

Do you have the mac version of skype ? the version of skype that is for mac downloaded on your mac partition?
I am using skype just fine on my mbp, but i am not using windows on my mac. Just curious-

[SOLVED] Can't get Skype to work.

Hello,
I just installed Skype using the Arch wiki and when I roll the mouse pointer over the start screen Openbox restarts and I'm back at my SLIM login screen.
No clue what's going on.
Last edited by ManBlue (2010-10-06 12:11:08)

My Xorg.0.log
[ 17.604]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 17.604] X Protocol Version 11, Revision 0
[ 17.604] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 17.604] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
[ 17.604] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5 ro
[ 17.604] Build Date: 24 August 2010 01:44:37PM
[ 17.604]
[ 17.604] Current version of pixman: 0.18.4
[ 17.604] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.604] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.604] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 5 22:28:26 2010
[ 17.636] (==) Using config file: "/etc/X11/xorg.conf"
[ 17.636] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.671] (==) ServerLayout "DualSrceen"
[ 17.671] (**) |-->Screen "Screen0" (0)
[ 17.671] (**) | |-->Monitor "Monitor0"
[ 17.671] (**) | |-->Device "Card0"
[ 17.671] (**) |-->Screen "Screen1" (1)
[ 17.671] (**) | |-->Monitor "Monitor1"
[ 17.671] (**) | |-->Device "Card1"
[ 17.671] (**) |-->Input Device "Mouse0"
[ 17.671] (**) |-->Input Device "Keyboard0"
[ 17.671] (**) Option "Xinerama" "1"
[ 17.671] (==) Automatically adding devices
[ 17.671] (==) Automatically enabling devices
[ 17.671] (**) Xinerama: enabled
[ 17.708] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.708] Entry deleted from font path.
[ 17.736] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.737] Entry deleted from font path.
[ 17.737] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 17.737] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 17.737] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 17.737] (WW) Disabling Mouse0
[ 17.737] (WW) Disabling Keyboard0
[ 17.737] (II) Loader magic: 0x7d4880
[ 17.737] (II) Module ABI versions:
[ 17.737] X.Org ANSI C Emulation: 0.4
[ 17.737] X.Org Video Driver: 8.0
[ 17.737] X.Org XInput driver : 11.0
[ 17.737] X.Org Server Extension : 4.0
[ 17.737] (--) PCI:*(0:2:0:0) 10de:0640:3842:c954 rev 161, Mem @ 0xdf000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[ 17.748] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17.748] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 17.748] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 17.748] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 17.748] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 17.748] (II) "dri" will be loaded by default.
[ 17.748] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 17.748] (II) LoadModule: "glx"
[ 17.788] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.074] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.074] compiled for 4.0.2, module version = 1.0.0
[ 18.074] Module class: X.Org Server Extension
[ 18.074] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:19:01 PDT 2010
[ 18.074] (II) Loading extension GLX
[ 18.074] (II) LoadModule: "dri2"
[ 18.083] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.101] (II) Module dri2: vendor="X.Org Foundation"
[ 18.101] compiled for 1.9.0, module version = 1.2.0
[ 18.101] ABI class: X.Org Server Extension, version 4.0
[ 18.101] (II) Loading extension DRI2
[ 18.101] (II) LoadModule: "extmod"
[ 18.101] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.113] (II) Module extmod: vendor="X.Org Foundation"
[ 18.113] compiled for 1.9.0, module version = 1.0.0
[ 18.113] Module class: X.Org Server Extension
[ 18.113] ABI class: X.Org Server Extension, version 4.0
[ 18.113] (II) Loading extension MIT-SCREEN-SAVER
[ 18.113] (II) Loading extension XFree86-VidModeExtension
[ 18.113] (II) Loading extension XFree86-DGA
[ 18.113] (II) Loading extension DPMS
[ 18.113] (II) Loading extension XVideo
[ 18.113] (II) Loading extension XVideo-MotionCompensation
[ 18.113] (II) Loading extension X-Resource
[ 18.113] (II) LoadModule: "dbe"
[ 18.113] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.115] (II) Module dbe: vendor="X.Org Foundation"
[ 18.115] compiled for 1.9.0, module version = 1.0.0
[ 18.115] Module class: X.Org Server Extension
[ 18.115] ABI class: X.Org Server Extension, version 4.0
[ 18.115] (II) Loading extension DOUBLE-BUFFER
[ 18.116] (II) LoadModule: "record"
[ 18.116] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.116] (II) Module record: vendor="X.Org Foundation"
[ 18.116] compiled for 1.9.0, module version = 1.13.0
[ 18.116] Module class: X.Org Server Extension
[ 18.116] ABI class: X.Org Server Extension, version 4.0
[ 18.116] (II) Loading extension RECORD
[ 18.116] (II) LoadModule: "dri"
[ 18.116] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.117] (II) Module dri: vendor="X.Org Foundation"
[ 18.117] compiled for 1.9.0, module version = 1.0.0
[ 18.117] ABI class: X.Org Server Extension, version 4.0
[ 18.117] (II) Loading extension XFree86-DRI
[ 18.117] (II) LoadModule: "nvidia"
[ 18.132] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.180] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.180] compiled for 4.0.2, module version = 1.0.0
[ 18.180] Module class: X.Org Video Driver
[ 18.199] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 10:00:06 PDT 2010
[ 18.199] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.199] (++) using VT number 7
[ 18.202] (II) Loading sub module "fb"
[ 18.202] (II) LoadModule: "fb"
[ 18.202] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.221] (II) Module fb: vendor="X.Org Foundation"
[ 18.221] compiled for 1.9.0, module version = 1.0.0
[ 18.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.221] (II) Loading sub module "wfb"
[ 18.221] (II) LoadModule: "wfb"
[ 18.221] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.226] (II) Module wfb: vendor="X.Org Foundation"
[ 18.226] compiled for 1.9.0, module version = 1.0.0
[ 18.226] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.226] (II) Loading sub module "ramdac"
[ 18.226] (II) LoadModule: "ramdac"
[ 18.226] (II) Module "ramdac" already built-in
[ 18.240] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 18.240] (==) NVIDIA(0): RGB weight 888
[ 18.240] (==) NVIDIA(0): Default visual is TrueColor
[ 18.240] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.240] (**) NVIDIA(0): Option "TwinView" "0"
[ 18.241] (**) NVIDIA(0): Enabling RENDER acceleration
[ 18.241] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 18.241] (II) NVIDIA(0): enabled.
[ 21.732] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
[ 21.732] (--) NVIDIA(0): Memory: 524288 kBytes
[ 21.732] (--) NVIDIA(0): VideoBIOS: 62.94.29.00.50
[ 21.732] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 21.732] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 21.732] (--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:2:0:0:
[ 21.732] (--) NVIDIA(0): Acer X193W (CRT-0)
[ 21.732] (--) NVIDIA(0): Acer P191W (DFP-1)
[ 21.732] (--) NVIDIA(0): Acer X193W (CRT-0): 400.0 MHz maximum pixel clock
[ 21.732] (--) NVIDIA(0): Acer P191W (DFP-1): 330.0 MHz maximum pixel clock
[ 21.732] (--) NVIDIA(0): Acer P191W (DFP-1): Internal Dual Link TMDS
[ 21.921] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 21.921] (WW) NVIDIA(0): No valid modes for "1440x900_75.00"; removing.
[ 21.921] Warning: Xrealloc: requesting unpleasantly large amount of memory: 0 bytes.
[ 21.921] (WW) NVIDIA(0):
[ 21.921] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 21.921] (WW) NVIDIA(0): "nvidia-auto-select".
[ 21.921] (WW) NVIDIA(0):
[ 21.921] (II) NVIDIA(0): Validated modes:
[ 21.921] (II) NVIDIA(0): "nvidia-auto-select"
[ 21.921] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 21.944] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 21.944] (--) NVIDIA(0): option
[ 21.944] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
[ 21.944] (WW) NVIDIA(0): Xinerama extension.
[ 21.944] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 21.945] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 21.945] (==) NVIDIA(1): RGB weight 888
[ 21.945] (==) NVIDIA(1): Default visual is TrueColor
[ 21.945] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 21.945] (**) NVIDIA(1): Option "TwinView" "0"
[ 21.945] (**) NVIDIA(1): Enabling RENDER acceleration
[ 21.945] (II) NVIDIA(1): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
[ 21.945] (--) NVIDIA(1): Memory: 524288 kBytes
[ 21.945] (--) NVIDIA(1): VideoBIOS: 62.94.29.00.50
[ 21.945] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 21.945] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 21.945] (--) NVIDIA(1): Connected display device(s) on GeForce 9500 GT at PCI:2:0:0:
[ 21.945] (--) NVIDIA(1): Acer X193W (CRT-0)
[ 21.945] (--) NVIDIA(1): Acer P191W (DFP-1)
[ 21.945] (--) NVIDIA(1): Acer X193W (CRT-0): 400.0 MHz maximum pixel clock
[ 21.945] (--) NVIDIA(1): Acer P191W (DFP-1): 330.0 MHz maximum pixel clock
[ 21.945] (--) NVIDIA(1): Acer P191W (DFP-1): Internal Dual Link TMDS
[ 22.143] (II) NVIDIA(1): Assigned Display Device: DFP-1
[ 22.143] (==) NVIDIA(1):
[ 22.143] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 22.143] (==) NVIDIA(1): will be used as the requested mode.
[ 22.143] (==) NVIDIA(1):
[ 22.143] (II) NVIDIA(1): Validated modes:
[ 22.143] (II) NVIDIA(1): "nvidia-auto-select"
[ 22.143] (II) NVIDIA(1): Virtual screen size determined to be 1440 x 900
[ 22.145] (--) NVIDIA(1): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 22.145] (--) NVIDIA(1): option
[ 22.145] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
[ 22.145] (WW) NVIDIA(1): Xinerama extension.
[ 22.145] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
[ 22.145] (--) Depth 24 pixmap format is 32 bpp
[ 22.147] (II) NVIDIA(0): Initialized GPU GART.
[ 22.148] (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
[ 22.149] (II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
[ 22.149] (II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
[ 22.149] (II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
[ 22.149] (II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
[ 22.149] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 22.149] (II) NVIDIA(0): Config Options in the README.
[ 22.150] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 22.199] (II) Loading extension NV-GLX
[ 22.208] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 22.220] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 22.224] (==) NVIDIA(0): Backing store disabled
[ 22.224] (==) NVIDIA(0): Silken mouse enabled
[ 22.234] (==) NVIDIA(0): DPMS enabled
[ 22.241] (II) Loading extension NV-CONTROL
[ 22.241] (WW) NVIDIA(0): Option "Enable" is not used
[ 22.241] (==) RandR enabled
[ 22.243] (II) NVIDIA(1): Initialized GPU GART.
[ 22.245] (II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
[ 22.245] (II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
[ 22.245] (II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
[ 22.245] (II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
[ 22.245] (II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
[ 22.245] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 22.245] (II) NVIDIA(1): Config Options in the README.
[ 22.245] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
[ 22.348] (II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
[ 22.351] (II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
[ 22.351] (==) NVIDIA(1): Backing store disabled
[ 22.351] (==) NVIDIA(1): Silken mouse enabled
[ 22.363] (==) NVIDIA(1): DPMS enabled
[ 22.363] (WW) NVIDIA(1): Option "Enable" is not used
[ 22.363] (==) RandR enabled
[ 22.363] (II) Initializing built-in extension Generic Event Extension
[ 22.363] (II) Initializing built-in extension SHAPE
[ 22.363] (II) Initializing built-in extension MIT-SHM
[ 22.363] (II) Initializing built-in extension XInputExtension
[ 22.363] (II) Initializing built-in extension XTEST
[ 22.363] (II) Initializing built-in extension BIG-REQUESTS
[ 22.363] (II) Initializing built-in extension SYNC
[ 22.363] (II) Initializing built-in extension XKEYBOARD
[ 22.363] (II) Initializing built-in extension XC-MISC
[ 22.363] (II) Initializing built-in extension SECURITY
[ 22.363] (II) Initializing built-in extension XINERAMA
[ 22.363] (II) Initializing built-in extension XFIXES
[ 22.363] (II) Initializing built-in extension RENDER
[ 22.363] (II) Initializing built-in extension RANDR
[ 22.363] (II) Initializing built-in extension COMPOSITE
[ 22.363] (II) Initializing built-in extension DAMAGE
[ 22.363] (II) Initializing extension GLX
[ 23.327] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 23.328] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.328] (II) LoadModule: "evdev"
[ 23.328] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.328] (II) Module evdev: vendor="X.Org Foundation"
[ 23.328] compiled for 1.9.0, module version = 2.5.0
[ 23.328] Module class: X.Org XInput Driver
[ 23.328] ABI class: X.Org XInput driver, version 11.0
[ 23.328] (**) Power Button: always reports core events
[ 23.328] (**) Power Button: Device: "/dev/input/event2"
[ 23.340] (--) Power Button: Found keys
[ 23.340] (II) Power Button: Configuring as keyboard
[ 23.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.340] (**) Option "xkb_rules" "evdev"
[ 23.340] (**) Option "xkb_model" "evdev"
[ 23.340] (**) Option "xkb_layout" "us"
[ 23.370] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23.370] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.370] (**) Power Button: always reports core events
[ 23.371] (**) Power Button: Device: "/dev/input/event1"
[ 23.380] (--) Power Button: Found keys
[ 23.380] (II) Power Button: Configuring as keyboard
[ 23.380] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.380] (**) Option "xkb_rules" "evdev"
[ 23.380] (**) Option "xkb_model" "evdev"
[ 23.380] (**) Option "xkb_layout" "us"
[ 23.383] (II) config/udev: Adding input device sn9c20x (/dev/input/event5)
[ 23.383] (**) sn9c20x: Applying InputClass "evdev keyboard catchall"
[ 23.383] (**) sn9c20x: always reports core events
[ 23.383] (**) sn9c20x: Device: "/dev/input/event5"
[ 23.393] (--) sn9c20x: Found keys
[ 23.393] (II) sn9c20x: Configuring as keyboard
[ 23.393] (II) XINPUT: Adding extended input device "sn9c20x" (type: KEYBOARD)
[ 23.393] (**) Option "xkb_rules" "evdev"
[ 23.393] (**) Option "xkb_model" "evdev"
[ 23.393] (**) Option "xkb_layout" "us"
[ 23.397] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 23.397] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.397] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.397] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 23.410] (--) AT Translated Set 2 keyboard: Found keys
[ 23.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 23.410] (**) Option "xkb_rules" "evdev"
[ 23.410] (**) Option "xkb_model" "evdev"
[ 23.410] (**) Option "xkb_layout" "us"
[ 23.410] (II) config/udev: Adding input device ImExPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 23.410] (**) ImExPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 23.410] (**) ImExPS/2 Logitech Wheel Mouse: always reports core events
[ 23.410] (**) ImExPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 23.423] (--) ImExPS/2 Logitech Wheel Mouse: Found 9 mouse buttons
[ 23.423] (--) ImExPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 23.423] (--) ImExPS/2 Logitech Wheel Mouse: Found relative axes
[ 23.423] (--) ImExPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 23.423] (II) ImExPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.423] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Wheel Mouse" (type: MOUSE)
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 23.423] (**) ImExPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 23.423] (II) ImExPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 23.423] (II) config/udev: Adding input device ImExPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 23.423] (II) No input driver/identifier specified (ignoring)
[ 23.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 23.424] (II) No input driver/identifier specified (ignoring)

I have a xD-PictureCard that I want to load pictures onto, from my iPhotos. The reader is a FinePix can I get it to work on the Mac. when I try it wont install the software. Is there any way i can load pics onto the SD card.

I have a xD-PictureCard (SD Card) that works in a picture frame. I have used it in the past on a Windows computer, now having an apple I want to change the pics and cannot. When I reload the discs for Mac they won't install. Is there anything I can do to put the pics on the SD card, I don't want to throw away the picture frame it cost a lot of money.

This should be perfectly possible and without loading any software at all.
Get a Card Reader for the XD card, and plug it into the Mac. It will then appear on the desktop. Drg the files to the Card. Make sure you keep the folder structure used on the Card - don't change that.
Regards
TD

Can't get iCloud to work on my Mac

I am trying to get iCloud on my Mac and iPhone so I can sync documents, photos, etc. But I can't seem to get iCloud on my Mac to work. Example: there's no option to save in iCloud on Pages. I have OS 10.7.5, and Pages 4.3; my wife has OS 10.8.5 and Pages 4.3, but she CAN save things to iCloud. Any ideas?

For sharing documents and sharing photos via My Photo Stream with your Mac you'll need 10.7.5 at a minimum which you apparently have. So you should be able to do the same as your wife.
Documents in the Cloud
iOS 5
iWork for iOS (Pages 1.5, Numbers 1.5, Keynote 1.5)
OS X v10.7.5
iWork ’09 (Pages 4.2, Numbers 2.2, Keynote 5.2)
My Photo Stream
iOS 5.1
OS X v10.7.5
iPhoto ’11 (9.2.2)
or Aperture 3.2.3
For more information on what system you need to be running in order to utilize the various iCloud features see this Apple document: System requirements for iCloud.
Have you tried logging out of iCloud and then back in in the System preferences? However, your best bet would be to do as Csound1 suggested, upgrade to 10.8.5, so you have parity with your wife's Mac.

Can't get WEP to work with both mac and windows machines.

Currently my airport express is setup with no security. When I try to setup using WEP it works great for my powerbook but the windows machines constantly get disconnected.
Any ideas? Should I use other types of wireless security (WPA etc...)? If so, can an xp machine be configured for that type?
Any help would be greatly appreciated.
PowerBook G4 Mac OS X (10.4.7)

If you can use WPA use WPA, it will depend on your PC
wireless adapter and if you are running Windows XP
SP2.
--the window PC is running xp sp 2 but the adapter does not appear to support WPA (dell true mobile 1300 internal adapter)
from your response below not clear what is the best path to take given WEP is the only option.
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors
use certain algorithms to convert simple
alphanumeric passwords (or passphrases) into HEX
keys, thus enabling people to use simple memorable
WEP password rather than lengthy HEX keys.
The problem is that different vendors use different
algorithms to generate the HEX key and therefore a
ASCII password on an AEBS will be hashed differently
on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password
will be hashed by all vendors in the same way (if
you use 40bit WEP then a 5 character password is
required).
Though sometimes not even that works and the HEX key
must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired
Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Have a google aps account. I can not get it to work in my mac mail anymore

Everything was working fine with my google aps account. I have an email that's connected to my website. It's no longer working in mac mail now.

Actually your suggestion is for Enabling the Accessibility Option to use the Keyboard for Mouse functions. Not to enable the use of a USB Mouse.
Please do some research on the topic before posting misinformation.
Thanks.
Poikkeus wrote:
Go to System Preferences/Accessibility/Mouse and Trackpad, and tap on the Enable Mouse Keys. After you tap on the box, your MBP will give your mouse priority in pointing and clicking on your computer; hoever, this also deactivates your Touch Pad - so you can use only one at a time.
I'm sure this answers your question, but I'm wondering why you choose a mouse over a touch pad?

My bank uses FinanceWorks. I can't get it to work on my MAC which uses 10.10.2 Yosemite

I just upgraded my iMac to yosemite 10.10.2. Now the app my bank uses, FinanceWorks, doesn't work. Anyone know how to fix this? Thank you!

I work for Digital Insight, the digital banking vendor that your bank works with to provide you with access to FinanceWorks. Just to be sure, are you using Safari as your web browser when trying to access FinanceWorks? If so, the upgrade to Yosemite likely changed your browser settings in Safari, specifically for cookie handling. The easiest work around is to go to the “Manage Money” tab in your Online Banking, control-click one of the FinanceWorks options (Account Overview or Trends), and choose to open in a new tab. From then on (until you clear your browser history or cookies), FinanceWorks should work normally within the tab.
Also of note, Digital Insight was divested by Intuit in 2013 and is now owned by NCR.

After installing the maverick i get this message when i try to open iTunes: If you want to run i 64bits modus you must remove the mark:Open in 32bits modus.But i have removed the 32bits and i still can't get it to work!Have maces

after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?

I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick!

Can't get skype to work in other mac system accounts

Similar Messages

Maybe you are looking for