Can't Get Sony PSP To Connect to Internet via my WRT54G Wireless Router

Hi:
I hope someone can help who was able to do this. I have tried everything and the PSP will not connect to my network. I use WEP security and a MAC address filter. I even turned both of these security features off and it still won't connect.
What am I doing wrong?
Thanks,
Paul

I have version 1.1, but it has the latest firmware revision 4.21.1 of January 30, 2007. The firmware notes state it supports up to hardware version 3. So you think this router won't work with the PSP because it is too old?

Similar Messages

Connecting A imac w/ a WRT54G Wireless Router

OK I have an imac but i want to have internet on it. I have a wrt54g wireless router. how can i get my imac to have the internet on it as well. BTW i lost the cd that came with it.

As per my knowledge the Mac computer uses Airport utility .....open utility under location it will show you name of youe network .....make a check on it ...... if it is a secure network ..... use the network key & click ok .....
See it above steps helps or not .......

Can't get AE clients to connect to internet-Plz help me!

I've had a home with router, wired mac's and pc's, and apple laptops for years with no problems. I removed old router and installed AE base station. I can connect to the Base Station via internet and wireless, but can't get past it to the net. I'm out of ideas.
My DSL modem from Sprint is a Prestige 660ME-61, with an address of 192.168.2.1. My "test" G5 desktop has an IP address of 192.168.1.23, subnet 255.255.255.0 and Router ip of 192.168.1.254 - as shown in system pref/network/built in ethernet configuration. This works fine with old pbx/router. I tried looking at my PBX/router settings and they use different terminology.
The AE auto setup didn't work, and I noticed it had set an ip address of 10.0.1.1 for the Base Station. I changed that to 192.168.1.x in the manual setup mode of DHCP. That generated starting and ending addresses of 192.168.1.2 to 192.168.1.200. On the Internet Connection tab, it shows IP address of 192.168.2.2, Router address of 192.168.2.254, and the DNS address from Sprint. With these paramters, I get something like "no connection to the internet" when I try to connect.
It seemed to me that I should set the router to be on the same 192.168.1.x addresses that DHCP is handing out, but when I try to change the Rounter Address to 192.168.1.254, I get a message saying that rounter address is not compatible with the lan address..
I'v worked with computers and networking for a long, long time, but I am at wits end - maybe it was the chemo! I would very much appreciate some very smart person telling me which simple setting to change to make it work! And yes, the DSL modem is plugged into the WAN port on the AE. Some of you might wonder how I'm sending this. The answer is I went back to my pre-AE configuration.
Thanks in advance!
Randy

Did you happen to allow enough time for a power recycle when switching the router connected to your DSL modem?
Modem/Router Power ReCycling
- Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL/Cable modem; Wait at least 30 minutes.
- Power-on the Internet Router; Wait at least 5 minutes.
- Power-on the computer(s)

Can't get airport express to connect to internet after ISP changed my modem

Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

Wifi Problem - can't get iPod Touch to connect to Internet

I've seen lots of posts and discussions around this issue but cannot seem to nail down a solution. I have no security or encryption whatsoever with my wireless router & network. Other devices can connect wirelessly with no problem but my iPod Touch, although it shows that it is connected to my wireless network with all the proper DNS settings, it cannot access the internet. Of course, none of the wifi-based apps will work as a result.
Based on what I've deduced so far, I think the issue is that my brand new iPod Touch does not like my older Linksys WRK54G wireless router. That said, my brother's newer iPhone picked up my wireless network fine recently??
Does anyone have any advice? Thanks.

I have read all the posts and did all the numerous solutions/suggestions for 2 days now and what worked for me is this:
I went to Dlink online and went to Wireless connection settings to change the SSID name as if I am using my router for the first time, then changed it to WPA 20 characters! then saved the settings. Do this on the original PC (in my case, a desktop linked to the router via Ethernet cable as I have 2 laptops running
from that router as well. Note, before doing the "Save the settings"
above, I reset the Dlink router (by putting a pin at the back of the unit,
then turning it off and on including my separate Netcomm modem.
You then go back to your Ipod touch/ Settings and Choose the new Network Name.GOOD LUCK.

Can't get EA3500 routers to connect to internet.

I'm trying to upgrade a pair of WRT54G routers to a new pair of EA3500 routers, but I cannot get the modems to connect to the internet. I've tried both of the new modems, and multiple connection cables between the Charter cable modem and the router, but I have yet to get a usable internet connection. I'm able to get to the router settings by browsing to 192.168.1.1, but the settings show there is no internet connection. My old routers still work great if I switch the cable modem over to them, so the problem is not likely with the modem or cable connection. Any suggestions on what might be going wrong?
Rick
Solved!
Go to Solution.

I had tried cycling the modem multiple times, but this time I gave it a full 5 minutes and I was finally able to connect. Thanks!
Rick

Hp photosmart 7520 - can fax, get calls but not receive fax with bundoed service and wireless router

I finally got the printer set up to my wireless router and am able to fax and receive calls but now I can't send a fax.
I have a bundled service phone, internet and cabl;e with voice mail.
I have reduced the number of rings to 2 and turned off automatic answer. ready to pull my hair out!!
HP tech service was no help and neither was the cable company. Got this far on my own but hit a wall!
any thoughts?

Hello @mull274 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into fax issues. I would like to help.
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fax Sending Fails Intermittently.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cannot connect to Internet via newly created wireless network

Just purchased an Aiport Express router this week. Connected it to an RCA DCM425 Time Warner Cable modem and it worked fine out of the box. Now, after running the Airport Utility to create a new password-protected network, I cannot connect to the Internet. Both my PowerBook G4 (running Mac OS X 10.4.10) and Windows PC (XP SP2) can connect to the new network but then cannot access the Internet. After being frustrated for a few hours with this I performed a hard reset and then could connect to the default apple network the AX was transmitting. But now I tried creating a new network again and again the same problem. No internet access despite Network Status indicating otherwise. Please help! I purchased this product b/c I thought it was supposed to be an easier setup.

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

I am trying to connect my ipad to the internet via wifi/3g wireless router/wireless dongle..it finds the router but not the dongle connected to it..any help appreciated

HI...just purchased a new ipad 2 16gb wifi only... Was also sold a 3g wireless modem so that i could connect it to my already owned wireless internet dongle.. upon trying to set it up i can get the Ipad to find the wireless router but thats it. When I plug my dongle into the wireless router as i would with my laptop the light goes green as it does when connecting the laptop but thats about as far as I can get...any help appreciated...cheers Brett

There are 3G Moblie Broadband Router i.e. a 3G dongle connected to a 3G router
http://www.aztech.com/prod_3g_hw550.html

Mac connects but PC won't connect to internet via TIme Capsule wireless net

I have my personal Mac and work PC at home. I'm switching from a wireless network using my airport extreme base station to a new time capsule. Had no problems earlier, but now with my new wireless network I have the following problem:
- Both Mac and PC are able to connect to my home wireless network created through Time Capsule
- Only Mac can access the internet via the Time Capsule wireless network
- PC connects fine to the wireless network, but the settings indicate the internet cannot be accessed
I've tried fiddling with configurations etc. but cannot seem to get the PC to connect through to the internet using my Time Capsule.
The PC will connect directly to the net if I plug in the ethernet from my cable modem....What's the problem? Any ideas?

Welcome to the discussions forum AZR-DC.
The PC will connect directly to the net if I plug in the ethernet from my cable modem...
Make it a habit to power down your modem whenever you connect something different to it. Merely detaching the AEBS and attaching your Time Capsule or your computer directly will confuse most modems, so leave it powered down for a few moments. Power down your other equipment while you're at it.
Then, power up all the equipment as follows:
Modem... wait a few moments for it to complete its startup sequence.
Time Capsule. Wait a few moments again.
Computers.
Be sure your PC and your Mac are getting their addresses "via DHCP".

Can't get Airport Extreme to connect to Internet

I have a D-Link 320T ethernet modem. This works fine connected straight into my Mac, but as soon as its connected to the Airport I loose my internet connection. Its seems to be something to do with my setup, but I'm clueless as to what.
My airport seems to be transmitting something, as my Nintendo DS can pick up the Network name I have created, but it gives me this message "connected to access point, but unable to connect to the server", error code 52100.

Hi Bidge,
Welcome to the Apple.com user discussion boards!
Do you have ADSL? Have you setup the Airport Extreme to establish the PPPoE session with your ISP?
To configure this, please refer to this Apple article - http://docs.info.apple.com/article.html?artnum=166636

How can I get the ipad to connect to itunes 10.6.3?

How can I get the ipad to connect to itunes 10.6.3?

The iPad mini requires iTunes 10.7 or newer to sync.
(82182)

I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
Agnes

Hey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Hi I can not get my printer to connect to the internet.

Hi
I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
When I try to download apps directly from the printer it says that it is not connected to the internet.
I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
Please help me

Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks

How can I get my iPad to connect the love film app to my Apple TV?

How can I get my iPad to connect the love film app to my Apple TV?

Have you confirmed that the app supports AirPlay? If it doesn't, then you'll have to connect via screen mirroring. See:
http://support.apple.com/kb/HT4437
and
http://support.apple.com/kb/HT5209
Regards.

Can't Get Sony PSP To Connect to Internet via my WRT54G Wireless Router

Similar Messages

Maybe you are looking for