Can't get sound through headphones

I cannot get sound through earbuds

Couple of things to check here.
1. Toggle volume buttons on headset
2. Check sound settings
2. Try a different headset to rule out the phone
3. If a second headset does not work check the headphone jack for debris
4. If no debris, and the phone is still under warranty, contact Apple Support or go by an Apple Store for service

Similar Messages

TS2634 I can only get sound through my ipad with the head phones.

I can only get sound through my ipad with the head phones. I haven't had this problem before. I upgraded about a week ago, but this is the first time the sound has been an issue. When I turn up the volume it shows that it is the volume for the headphones but I can't figure out how to adjust the volume for everything. I have rebooted.

Also try this if above doesn't work.
1. Plug and unplug my headphone jack into the iPad four times.
2. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound.

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

Have a 2 year old ipad2 and while speakers work fine I can no longer get sound through headphones, how can I get sound through the headphones?

I have a two year old ipad2 and while the speakers work ok I can no longer get any sound through the headphones? If any one has any suggestions on how I can get sound to come out of the headphones I would be grateful.

System Preferences --> Sound --> uncheck the mute button next to the Output volume (assuming it is set). Or move the Output volume slider.

Can't get sound through my big speakers

Hello all,
I just hooked up my new Apple TV and all works fine BUT can't get any sound through my big floor speakers, only through the tinny TV speaker (Samsung 46" LED).
The big speakers are powered by an older Onkyo FM AM receiver with no optical digital audio port. I currently enjoy sound from these speakers when watching my Comcast cable stations or my DVD player, choosing respectfully between video 1 and video 2 ports on the receiver.
Question: Do I need a new receiver with an optical digital audio port, to be then connected to the Apple TV via this cable ?
My Comcast cable box has such a port. What would happen if I connected an optical digital audio cable from the Comcast box to my Apple TV ? Would the sound find its way into my big speakers while watching Netflix ? That's all I want.......
I don't have this darn cable now to try this.
Thanks guys.

hard aground wrote:
Hmmm....would that limitation be noticeable by average listeners ? I don't even know what 5.1 audio is.
5.1 is surround audio with L/R front, Center (mostly for speech), and L/R rear channels. You'd need 3 extra speakers for the additional channels.
The .1 refers to a subwoofer but if your main speakers produce good low frequency as it is it may not be needed as low frequencies tend to deliver less spatial information than mid/highs. If you wanted one it'd be an extra speaker.
You would notice the difference by virtue of having sounds spread around you rather than simple L/R on movies that support it (Dolby Digital 5.1). As your amp doesn't support this currently, you're not ging to miss anything going the stereo audio route for now.
I've had a 5.1 system (without the .1) for donkey's years, and yes it's fun/novel, but leads to more clutter in the room with leads extra speakers etc. In fact I've relocated my rear speakers some time ago and am just sticking with stereo for now.
Certainly worth looking into, but 5.1 is old hat anyway and more modern surround formats will utilise even more speakers for surround effects but AppleTV currently does not support these.
I'm running a pair of old tower Polk Audio speakers of my amp that vibrate the windows pretty good.
No reason you couldn't use these in a 5.1 or 5.0 system as main L/R speakers but you'd need new center and rear L/R speakers, cabling and amp +/- subwoofer.
Onkyo would still be a good bet for a quality reasonably priced amp though you'd probably find a myriad of options, possibly cheaper than your original Onkyo.

Can only hear sound through headphones

i can only hear sounds on my ipod touch through my headphones

first try plugging and unplugging your headphones at least a dozen times really fast because somtimes the headphone jack sometimes has debris in it. i used to have the same problem.
if that doesnt work restore it back to factory defaults by going to the setting icon then go to the general bar, after that scroll al the way to the bottom and click reset, then click reset all settings after that if it still wont work do the same thing accept click on erase all content and settings

No sound from internal speakers however i get sound through headphones when plugged in

i am not getting sound out of the laptop internal speakers when nothing is plugged into the headphone jacks. if i plug headphones or external speakers the sound is verified to be on because i get sound / volume. Any thoughts / ideas? Thanks

Sorry, I do not have a solution to offer. But I have exactly the same issue. HP Pavilion TX2000, now just out of Costco warranty period (naturally). Sound from built-in and external speakers worked for about 2 years and a handful of months. A couple weeks ago, when I unplugged the external speakers, the built-in speakers would work only sporadically. Eventually, the built-in speakers ceased to work at all. Now, external speakers have ceased to work, too. I can get something resembling sound from Logitech USB speakers, but if these are configured for stereo the sound crackles and pops beyond belief. Setting to mono works. For now.
I can only believe this is a hardware failure. Time-to-failure for this product is unacceptable, but what does HP care? It made it past the warranty, right?

Can't get sound through my speakers in Logic.

So for an assignment I recorded loads of stuff in the studios at uni and come back to mix it on Logic on my laptop and I can't seem to get any sound out from my speakers through logic. Speakers are working cause I'm listening to iTunes. I don't know if it's because the channel out puts were sent to the mixing desk or something? It won't let me change that. But now obviously the mixing desk isn't there. Oh i'm confused.
Sorry, pretty new to Logic and recording anf that, please give me some advice!

Select the correct Output Device in Logic Pro>Preferences>Audio>devices>Core Audio.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=44%26se ction=4%26tasks=true

I can't get sound from headphones

I have tried everything. Headphones don't work.

Two suggestions:
1. Check iTunes volume (the slider left of the progress bar). It's separate from the system volume.
2. Often, speaker problems can be resolved by resetting your computer's PRAM. This explains how: Resetting your Mac's PRAM and NVRAM, http://support.apple.com/kb/ht1379

Can't get sound with headphones on iPad mini

When I plug headphones into mini sound wont come out but still comes out if bottom of mini.

Hi!
I have exactly the same problem, and when I look for netflix on the App Store it doesn't show in the results. Did you find a solution?
Thanks!

Can't get sound from Insignia BT headphones w/ BT-equipped dv3t

Both are brand-new, I charged the headphones and downloaded the updated drivers from www.broadcom.com (actually Vista seemed to do it automatically) and the device is paired but I can't get any sound out of it (it's turned on:-)).
Under the Playback tab in the Sound control panel there are three items:
Speakers: Bluetooth Hands-free Audio
Speakers and Headphones: IDT High Definition Audio CODEC
Independent Headphones: IDT High Definition Audio CODEC
All say they are working, but when I test the sound of each one I only get sound from the notebook speakers using the second option. The only weird thing I can think of is that I had the USB adapter plugged in when I downloaded the drivers, so maybe it downloaded drivers designed to work through USB? (I can't get sound with the adapter plugged in, though, either).
Any suggestions welcome, I really want to get this to work and not have to send the headphones back to seller (which is what Insignia tech support told me to do).
P.S. I know I have BT turned on because I'm also connected to a wireless home network, they go together.

Hello again,
oops, I must have missed your last message... sorry for that!
I have to say, that I don t have my digital sound system that long, that I can answer this question for sure. However...
You re right, that it should be possible, although I wasn t able to find a way to do that... yet... Somewhere (don t know if it was this forum or another place) I ve read, that the SPDIF support for Windows Vista isn t that nice at this time... perhaps a new driver will solve this
Furthermore... I don t use the Media Center that much. So I don t even know if there is any option to set the output device (within the application Media Center). That would be important to realize "the best of both worlds". Explanation: If you want headphones support, you (always) have to leave the Speakers device as default. Other applications (such as Winamp,...) allow us to set the output device (in Winamp for example you can set it under the preferences Output -> Directsound device) to the SPDIF device, although we have selected "Speakers" as default in the control panel... nice, isn t it's For sure... if it would work...
That way you don t get a(n) AC3/DTS signal via SPDIF... so, if you use Windows Vista (I can't answer your question related to other operating systems, because of my newly purchased system -> I haven t used it on XP) the only way that I know ( til now) is to select the SPDIF device as default...

I can't get sound when my iMessages come through. The volume is on. Any ideas?

I Can't get sound when my iMessages come through. The volume is on. Any ideas?

Surely somebody knows what the problem is? Anybody.

HT1665 I have my Iphone 4S connected to an I home speaker. It is charging through the speaker but I can't get sound. Help

I have my IPhone 4s connected plugged into an IHome speaker. It is charging but I can't get sound out of it. Help please?

Yes, connect your iPhone to your computer, click onthe name of your iPhone then click on the apps tab in iTunes.

No sound through headphones/microphone ALC892

I've been trying for days to fix this issue, and am lost. I've got a new desktop and cannot get sound to come out my headphones, or take input from my microphone. I believe my sound card driver is installed correctly, and that it is a pulseaudio problem. I've gone through the troubleshooter on Arch's alsa, and pulseaudio wiki pages. I do get sound through my monitor speakers when I use HDMI, but would prefer headphones. I have tried Debian, Linux Mint, Manjaro, and crunchbang and none of them have had working audio for me.
where I see a problem is in pavucontrol, all my profiles, and input/output devices say (unplugged). So in output devices, and next to Headphones it says (unplugged) when it is plugged in, same with my mic. i see the visualizer playing to the music under headphones though.
everything is unmuted in alsamixer.
I've tried both the front panel mic/headphone port, and the back panel.
thanks in advance.
EDIT: i did get sound to play through my roommates USB headset, they have there own sound card. So sound does work, but I cannot always use these and still want to get sound through my headphones/mic.
"aplay -l":
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 51760 [79%] [on]
Front Right: Playback 51760 [79%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 9620 [15%] [on]
Front Right: Capture 9620 [15%] [on]
Last edited by felixnigh7 (2014-03-11 00:26:17)

Perhaps you have previous configuration files on your system (~/.asoundrc or similar)? You might want to look at you mapping of signal paths/jacks with hdajackretask found in alsa-tools (Frontpanel might be inactive on your particular hardware setup). Double check if correct module model is loaded for your card (line 36).
If you kill pulseaudio, does aplay produce sound?
To unload jack detection module this should work:
pacmd unload-module module-switch-on-port-available
Some people have issues with pulseaudio since upgrade to 5.0, so checkout changelog for configuration changes, here in forum there are several topics on this matter.

Can't get sound from my midi channels

Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
I've checked my outputs, etc...but nothing.
Please help me!!! I'm desperate!
Thanks

Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

Can't get sound through headphones

Similar Messages

Maybe you are looking for