Can't get started! Can I skip the Product Registration process?

I just bought a 12" G4 Powerbook. I think the previous owner did a fresh install of Mac OS version 10.3.3. When I turn it on, it goes to a "OS X Panther, getting started" menu, and it wants me to enter my Country, then U.S. keyboard settings, then a page where I'm supposed to enter my name & address & phone number ...
It says this info is used to "personalize my settings" (i can do that myself)
"store my contact information in the Mac OS X Address Book" (i don't want my info in the address book, and if i did i can do that myself)
and also "to register your product."
I don't want it registered. I want to skip this procedure and just get to the operating system so I can work with this computer for a few days and make sure everything is working properly. But I can't get past this - it comes up every time I start the computer.
I found this quote in some of the paperwork I have, "Your warranty is the same whether or not you register." (yeah the computer's old, the warranty doesn't apply.) So there must be a way to not register. Right?
Can anyone tell me how to get around this??

You could supply a generic user name and equally nothing address;
I've done that with a computer so it would have an Admin account
without any real personal information in the computer at that point.
Then, later on, you could set up a daily user account with lesser
permissions that could be deleted. Have the second account be
the primary one to appear on startup. At that point, you have a
basic secure system set up without hardly trying.
No concern about registration, the computer had probably been
registered and the item and OS is now vintage or near obsolete.
I don't recall if the second or third re-install of some OS X I'd
put back in a computer I'd wiped the contents from, actually even
went to Apple; since I didn't have internet set-up & it was offline.
You can also change the value of the additional account added,
later, from Standard, to Admin, and so on. Or to few permissions
such as one would want if the computer were left with a child.
There are many things one can do, even in that version OS X.
By isolating the Admin account from automatic login on startup,
any chance encounter with someone messing around would be
limited to only whatever a lesser daily account had to offer; and
for that one, you could initiate other secure preferences such as
login options and other basics that do not compromise your use.
The computer by default will start in the Admin account unless a
few other steps are taken to complicate things for unwanted guest
visitors who may happen across the computer & cause mischief.
(I'd avoid setting up main FileVault; but an item such as require
password to wake computer, or access from screensaver, etc
could be handy in a few instances; among other options.)
By personalizing simplistically such as "iBook User" with a fake street
and mailing address, such as 123 Anystreet, Anytown USA 00000,
you can then choose to join your own internet or network at a later
time, even your wireless, & it should just work (plus WPA password)
by choosing your setup options carefully. The other accounts could
be given Admin status also, or less.
Be sure to check up on getting the last supported Flash and Shockwave
players (and their uninstallers to be rid of the older versions) from Adobe;
and see about getting Mozilla-Camino 1.6.10 browser; plus other last
version updates to the OS, such as the final Combo update, quicktime,
java, and other items needed to carry the initial installation, complete.
Anyway...
Good luck & happy computing!

Similar Messages

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

Go back to the editor and close the photo there.

HT201328 I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in

I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in her name?
thanks
Dave

The process is as follows:
Backup the phone, Erase it, connect to iTunes for the unlock process, then your iProfile can be restored.
You can go ahead and get the SIM, bout you have to Erase the phone and connect to iTunes before it will be unlocked.

I bought Photoshop Elements 12 (box - CD) and threw away the box. I thought the serial number would be on the disc sleeve, but it was not. Now I can´t register the product. Is there something I can do to get the number/code to activate Photoshop Elements?

I bought Photoshop Elements 12 (box - CD) and threw away the box. I thought the serial number would be on the disc sleeve, but it was not. Now I can´t register the product. Is there something I can do to get the number/code to activate Photoshop Elements? Thank you.

My guess is that you won't be able to do much if you threw away the serial number before using it. The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
Beyond that you need to resolve serial number issues with ASdobe Support directly. Here is a link for chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I get Photoshop CS6 for Windows 7. I can not write the product key because I only can write numbers, but no letters.

I get Photoshop CS6 for Windows 7. I can not write the product key into the fields because I only can write numbers, but no letters.

Sounds like you've got an alphanumeric redemption code which you need to redeem for a numeric serial number.
Try Redemption Code Help

HT2589 how can i skip the viewing on my account when i has not use my apple id in i tunes stores?

How can i skip the viewing on my account when i has not use my apple id? The main problem is i do not have a credit card... so what should i do?

You can't, you will need to enter a credit card number before you can use that account in the store.
There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534

Can we Delete the Product/Material from Product Master in CRM

Hi Gurus,
I want to delete some test products from Product master, I don't see any link for delete there in product master transaction.
Can we Delete the Product from Product Master in CRM??
Thanks in Advance.
Regards,
Manoj Tiwari

Try this:
*& Report ZVB_PRODUCT_DELETE          (release CRM 4.0 SP03)          *
*&         Instructions are in OSS Note #427332                        *
report zvb_product_delete line-size 300.
const, include
include com_product_const001.
include com_product_const003.
include com_product_const009.
include com_product_const011.
include com_settype_attribute_const03.
tables: comm_iproduct,                                     "#EC NEEDED
         comm_product.
constants:
       gc_program type programm value 'COM_PRODUCT_DELETE_SINGLE'.
data: gv_product_guid type comt_product_guid,
       gv_prty type comt_product_type,
       gv_syslog(70) type c,
       lv_mobile_active type comt_boolean,
       lv_delete type comt_boolean value 'X'.
data: lt_settypes      type comt_frgtype_tab_ext,
       lt_status_guid   type comt_prd_status_guid_tab.
data: begin of lt_products occurs 0,
         product_id   like comm_product-product_id,
         product_guid like comm_product-product_guid,
      end of lt_products.
Screen User query
selection-screen comment /1(60) text-006.
selection-screen skip 2.
select-options: s_prid for comm_product-product_id.
*parameters: p_prid type comt_product_id   obligatory,
parameters: p_prty type comt_product_type obligatory default '01',
            p_logs type comt_logsys       obligatory,
            p_objf type comt_product_object_family,
            p_send as checkbox modif id 001 default on,
            p_usage as checkbox modif id 001 default off,
            p_test as checkbox default 'X'.
at selection-screen output.
perform check_mobile_download
      changing lv_mobile_active.
if lv_mobile_active is initial.
    loop at screen.
      check screen-group1 = '001'. "disable field p_send, p_usage
      screen-active = '0'.
      modify screen.
    endloop.
endif.
start-of-selection.
perform check_authority.
Write syslog entry
concatenate 'Rep. ' sy-repid ': ' p_prid(30) '/' p_prty '/' p_logs
        into gv_syslog.                                    "#EC NOTEXT
call 'C_WRITE_SYSLOG_ENTRY'
   id 'TYP' field ' '
   id 'KEY' field 'C00'
   id 'DATA' field gv_syslog .
inactive product are not supported here
select * from comm_iproduct
        where product_id    = p_prid
        and   product_type = p_prty
        and   object_family = p_objf
        and   logsys        = p_logs.
endselect.
if sy-subrc = 0.
   write: / text-001, text-005.
   exit.
endif.
read products according to the selection criteria
select * from comm_product
         into corresponding fields of table lt_products
         where product_id    in s_prid
         and   product_type = p_prty
         and   object_family = p_objf
         and   logsys        = p_logs.
if sy-subrc ne 0.
    write: / text-010.
    exit.
endif.
loop at lt_products.
read product and enqueue
    perform product_enqueue
         using lt_products-product_id
               p_prty
               p_logs
               p_objf
         changing gv_product_guid
                  gv_prty.
    check not gv_product_guid is initial.
    if p_usage = on.
      perform check_usage
              using gv_product_guid
           changing lv_delete.
    endif.
    check lv_delete = on.
    check p_test = space.
first delete the component of the IBase
    perform delete_ibasecomponent
         using gv_product_guid.
    perform delete_extensions
         using gv_product_guid
               lt_settypes.
    perform delete_settypes
         using gv_product_guid
               lt_settypes
      changing lt_status_guid.
    perform delete_interlinkages
         using gv_product_guid.
    perform delete_pme_data                      "multivalue attributes
         using gv_product_guid.
    perform delete_decoupled_data                "long text, longmatnr,
         using gv_product_guid.                  "ibase prodvar,...
    perform delete_status
         using lt_status_guid.
    perform delete_favorites
         using gv_product_guid.
    perform delete_clear_case
         using gv_product_guid.
    if p_send = 'X'.
      perform send_deletion_to_mw
           using gv_product_guid.
    endif.
    delete from comm_product     where product_guid = gv_product_guid.
    delete from comm_producth    where product_guid = gv_product_guid.
    delete from comm_product_idx where product_guid = gv_product_guid.
    delete from comm_prwb_user_2 client specified
           where client = sy-mandt and last_object = gv_product_guid.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    write: / text-001, lt_products-product_id, text-004.
endloop.
*&      Form product
form product_enqueue
   using   iv_prid type comt_product_id
           iv_prty type comt_product_type
           iv_logs type comt_logsys
           iv_objf type comt_product_object_family
changing ev_pguid type comt_product_guid
                      ev_prty type comt_product_type.
data ls_product type comt_product.
call function 'COM_PRODUCT_GUID_GET'
    exporting
      iv_product_id    = iv_prid
      iv_product_type = iv_prty
      iv_logsys        = iv_logs
      iv_object_family = iv_objf
      iv_show_popup    = 'X'
    importing
      ev_product_guid = ev_pguid
    exceptions
      not_found        = 1
      wrong_call       = 2
      internal_error   = 3
      others           = 4.
if sy-subrc <> 0.
    write: / text-001, space, iv_prid.
    write:   text-003.        "Product not found
    exit.
else.
    write: / text-001, space, iv_prid.
    write:   text-002.        "Product found
endif.
call function 'COM_PRODUCT_READ_SINGLE'
    exporting
      iv_product_guid = ev_pguid
      iv_enqueue_mode = ' '
    importing
      es_product      = ls_product
    exceptions
      not_found       = 1
      wrong_call      = 2
      foreign_lock    = 3
      enqueue_failed = 4
      others          = 5.
if sy-subrc <> 0.
    if sy-subrc > 2.
      write: / text-001, space, iv_prid.
      write:   text-007. "Product enqueued
      exit.
    else.
      message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      exit.
    endif.
    exit.
endif.
ev_prty = ls_product-product_type.
special authotirty check (with considering the assigned
categories)
call function 'COM_PRODUCT_CT_AUTHORITY_CHECK'
   exporting
     iv_auth_act     = '06'
     iv_product_guid = ev_pguid
   exceptions
     no_authority    = 1
     wrong_call      = 2
     internal_error = 3
     others          = 4.
if sy-subrc <> 0.
   message id sy-msgid type sy-msgty number sy-msgno
           with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                               " product
*&      Form delete_extensions
form delete_extensions
     using iv_product_guid type comt_product_guid
           et_settype      type comt_frgtype_tab_ext.
data: lv_db_tab        type ddobjname,
         lv_subrc_pr_guid like sy-subrc,
         table_name_ref   type ref to data,
         lt_extension     type comt_frgtype_tab_ext,
         ls_extension     type comm_frgtype_ext.
field-symbols: <table_name> type any,
                 <field_name> type any.
check not iv_product_guid is initial.
delete extensions e.g. COMM_PRFREEATTR, CRMM_PR_TAX, COMM_PR_UNIT,
                       COMM_PR_SHTEXT,COMM_PR_GTIN, comm_prprdcatr,..
perform load_extensions
          using iv_product_guid
       changing lt_extension
                 et_settype.
loop at lt_extension into ls_extension.
    lv_db_tab = ls_extension-frgtype_tab.
    check not lv_db_tab is initial. "CRM_CAT_SAT & CRM_CAT_PUR
does table exist ?
    call function 'DDIF_NAMETAB_GET'
      exporting
        tabname   = lv_db_tab
      exceptions
        not_found = 1
        others    = 2.
    check sy-subrc = 0.
Due to any reason (I don't know why) sometimes we have product_guid
and sometimes we have frg_guid as name of the key field.
    create data table_name_ref type (lv_db_tab).
    assign table_name_ref->* to <table_name>.
    assign component 'PRODUCT_GUID' of structure <table_name>
           to <field_name>.
    lv_subrc_pr_guid = sy-subrc.
    if lv_subrc_pr_guid = 0.
      delete from (lv_db_tab)
             where product_guid = iv_product_guid.
    else.
      delete from (lv_db_tab)
             where frg_guid     = iv_product_guid.
    endif.
delete history of extension table
    concatenate ls_extension-frgtype_tab 'H' into lv_db_tab.
    create data table_name_ref type (lv_db_tab).
    assign table_name_ref->* to <table_name>.
    assign component 'LOGSYS' of structure <table_name>
                              to <field_name>.
    check sy-subrc = 0.
    call function 'DDIF_NAMETAB_GET'
      exporting
        tabname   = lv_db_tab
      exceptions
        not_found = 1
        others    = 2.
    check sy-subrc = 0.
    if lv_subrc_pr_guid = 0.
      delete from (lv_db_tab)
             where product_guid = iv_product_guid.
    else.
      delete from (lv_db_tab)
             where frg_guid     = iv_product_guid.
    endif.
endloop. " end of loop for all extensions
endform.                    " delete_extensions
*&      Form delete_settypes
form delete_settypes
     using iv_product_guid   type comt_product_guid
           it_settypes       type comt_frgtype_tab_ext
    changing et_status_guid type comt_prd_status_guid_tab.
data: ls_reldesc type coms_pr_org_rel,
        lt_reldesc type comt_pr_org_rel_tab,
        lt_reltab type ref to data,
        ls_settype type comt_settype_ext,
        ls_table   type tabname,
        ls_status_guid   type crmt_object_guid.
field-symbols:
       <fs_reltab>   type any table,
       <fs_relrow>   type any,
       <fs_settype> type comt_frgtype_guid,
       <fs_setguid> type comt_frg_guid,
       <fs_statguid> type crmt_object_guid.
memorise product status guide
ls_status_guid = iv_product_guid.
append ls_status_guid to et_status_guid.
load description of relation tables
call method cl_com_product_org_type=>comc_pr_org_link_read_all
    importing
      et_pr_org_rel = lt_reldesc
    exceptions
      no_desc       = 0.
for all relation types (e.g. comm_pr_frg_rel, comm_pr_frg_rod)
loop at lt_reldesc into ls_reldesc.
read product/settype relations
    create data lt_reltab type (ls_reldesc-link_table_ttyp).
    assign lt_reltab->* to <fs_reltab>.
    call function ls_reldesc-func_rel_read_pr
      exporting
        iv_product_guid = iv_product_guid
      importing
        et_rel          = <fs_reltab>
      exceptions
        wrong_call      = 1
        not_found       = 2
        others          = 3.
    check sy-subrc = 0.
for all links...
    loop at <fs_reltab> assigning <fs_relrow>.
      assign component 'FRAGMENT_TYPE' of structure <fs_relrow>
                                                 to <fs_settype>.
      assign component 'FRAGMENT_GUID' of structure <fs_relrow>
                                                 to <fs_setguid>.
      assign component 'STATUS_OBJECT' of structure <fs_relrow>
                                                 to <fs_statguid>.
      read table it_settypes with key frgtype_guid = <fs_settype>
                             into ls_settype.
      check sy-subrc = 0.
    settype table
      delete from (ls_settype-frgtype_tab)
             where frg_guid = <fs_setguid>.
    history table
      concatenate ls_settype-frgtype_tab 'H' into ls_table.
      delete from (ls_table)
             where frg_guid = <fs_setguid>.
    memorise settype status guide
      if not <fs_statguid> is initial.
        ls_status_guid = <fs_statguid>.
        append ls_status_guid to et_status_guid.
      endif.
    endloop. "of links
relation table (e.g. comm_pr_frg_rel)
    delete from (ls_reldesc-link_table)
           where product_guid = iv_product_guid.
history table
    concatenate ls_reldesc-link_table 'H' into ls_table.
    delete from (ls_table) where product_guid = iv_product_guid.
endloop. " of relation types
endform.                    " delete_settypes
*&      Form delete_interlinkages
form delete_interlinkages
     using iv_product_guid type comt_product_guid.
constants: cv_db_name(8) type c value 'COMM_IL_',
             cv_suffix_h(2) type c value '_H'.
data: lt_ilinks   type comt_il_data_tab,
        lt_reltype type comc_il_reltype_tab with header line,
        lv_ddictype type dd02v-tabclass,
        lv_dbname        type comt_structure.
CHECK p_objf IS INITIAL.
first we have to read all ILs where the productguid is sourceguid
refresh lt_ilinks.
call function 'COM_IL_API_WHERE_USED'
    exporting
      iv_objectguid   = iv_product_guid
      iv_objtype      = gc_bus_objtype_bus1178
      iv_direction    = 'S'
    importing
      et_interlinkage = lt_ilinks.
check not lt_ilinks[] is initial.
delete adjacent duplicates from lt_ilinks comparing reltype.
read ilinkage customizing
select * from comc_il_reltype into table lt_reltype
     for all entries in lt_ilinks where reltyp = lt_ilinks-reltype.
delete interlinkages
loop at lt_reltype.
    if lt_reltype-streltyp ne space.
      concatenate cv_db_name lt_reltype-streltyp into lv_dbname.
    else.
      concatenate cv_db_name lt_reltype-reltyp   into lv_dbname.
    endif.
delete data
    call function 'DDIF_NAMETAB_GET'
      exporting
        tabname   = lv_dbname
      importing
        ddobjtype = lv_ddictype
      exceptions
        not_found = 1
        others    = 2.
    check sy-subrc = 0 and lv_ddictype = 'TRANSP'.          "#EC NOTEXT
    delete from (lv_dbname) where sourceguid = iv_product_guid.
delete history
    check lt_reltype-change_doc = 'X'.
    concatenate lv_dbname cv_suffix_h into lv_dbname.
    call function 'DDIF_NAMETAB_GET'
      exporting
        tabname   = lv_dbname
      importing
        ddobjtype = lv_ddictype
      exceptions
        not_found = 1
        others    = 2.
    check sy-subrc = 0 and lv_ddictype = 'TRANSP'.          "#EC NOTEXT
    delete from (lv_dbname) where sourceguid = iv_product_guid.
endloop.
endform.                    "delete_interlinkages
*&      Form delete_pme_data
form delete_pme_data
     using iv_product_guid type comt_product_guid.
delete multivalue attributes from PME
data: lt_pmemap like standard table of comm_pme_prd_map,
        ls_pmemap like comm_pme_prd_map.
select * into table lt_pmemap
            from comm_pme_prd_map
            where crm_object_guid = iv_product_guid.
check sy-subrc = 0.
loop at lt_pmemap into ls_pmemap.
    call function 'CRM_SCE_DB_KB_DELETE'
      exporting
        iv_kbid = ls_pmemap-kbid.
endloop.
delete comm_pme_prd_map from table lt_pmemap.
endform.                    "delete_pme_data
*&      Form send_deletion_to_mw
form send_deletion_to_mw
     using iv_product_guid type comt_product_guid.
data: cv_function_module like rs38l-name
              value 'CRM_PROD_SEND_DELETION_MESSAGE'.       "#EC NOTEXT
data: lt_product_guid type comt_product_s_tab with header line.
lt_product_guid-product_guid = iv_product_guid.
append lt_product_guid.
call function 'FUNCTION_EXISTS'
    exporting
      funcname           = cv_function_module
    exceptions
      function_not_exist = 1
      others             = 2.
check sy-subrc = 0.
call function cv_function_module
    exporting
      it_product_guid = lt_product_guid[]
      iv_test_only    = space
    exceptions
      internal_error = 1
      others          = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " send_deletion_to_mw
*&      Form check_mobile_download
form check_mobile_download
changing ev_mobile_active type comt_boolean.
data:
        cv_db_tab   type ddobjname value 'SMOMARA'.
data: lv_lines    type i value 0.
clear ev_mobile_active.
call function 'DDIF_NAMETAB_GET'
    exporting
      tabname   = cv_db_tab
    exceptions
      not_found = 1
      others    = 2.
check sy-subrc = 0.
select count( * ) into lv_lines
    from (cv_db_tab) up to 10 rows.                     "#EC CI_NOWHERE
if lv_lines > 0.
    ev_mobile_active = on.
endif.
endform.                    " check_mobile_download
*&      Form check_authority
form check_authority.
tables: t000, comc_pr_tool_reg.                          "#EC NEEDED
check productiv system - report must not be executed
select single * from t000 client specified             "#EC CI_CLIENT
                  where mandt = sy-mandt.
if t000-cccategory = 'P'.
    message e807(com_product) .
    leave.
    leave to transaction '    '.
endif.
Check authority for product delete
call function 'COM_PRODUCT_AUTHORITY_CHECK'
    exporting
      iv_auth_act    = '06'
    exceptions
      no_authority   = 1
      wrong_call     = 2
      internal_error = 3
      others         = 4.
if sy-subrc ne 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MESSAGE e808(com_product).
    leave.
    leave to transaction '    '.
endif.
Additional step: registration
select single * from comc_pr_tool_reg
         where program_name = gc_program
         and   user_name    = sy-uname
         and   exec_date    = sy-datum.
if sy-subrc ne 0.
    message e809(com_product).
endif.
endform.                    " check_authority
*&      Form delete_decoupled_data
form delete_decoupled_data
     using iv_product_guid type comt_product_guid.
include com_product_const018.
Deleting decoupled and customer requested data (long_text, longmatnr,
upload registry, ibase product variants coming from R/3,
archive verify registry). Documents like PDF,XLS,DOC,JPG stored in
Content Management will not be deleted
load BADI implementations
class: cl_exithandler definition load.
data: exit_obj type ref to if_ex_com_product_delete.
call method cl_exithandler=>get_instance
    exporting
      exit_name              = gc_badi-com_product_delete
      null_instance_accepted = on
    changing
      instance               = exit_obj.
call BADI implementations (User Exit)
call method exit_obj->delete_extra_data
    exporting
      iv_product_guid = iv_product_guid.
endform.                    " delete_decoupled_data
*&      Form load_extensions
form load_extensions
     using iv_product_guid type comt_product_guid
changing et_extension    type comt_frgtype_tab_ext
           et_settype      type comt_frgtype_tab_ext.
data: lt_prd_cat      type comt_prod_cat_rel_tab,
        ls_prd_cat      type comt_prod_cat_rel,
        lt_cat_frg      type comt_prcat_frag_rel_tab,
        ls_cat_frg      type comt_prcat_frag_rel,
        lt_settype_guid type comt_frgtypeguid_tab,
        ls_settype_guid type comt_frgtype_guid,
        lt_settype      type comt_frgtype_tab_ext.
refresh et_extension.
read categories assigned to product
call function 'COM_PROD_CAT_REL_READ_WITH_PR'
    exporting
      iv_product_guid = iv_product_guid
    importing
      et_set          = lt_prd_cat.
loop at lt_prd_cat into ls_prd_cat.
read allowed settypes for categories
    call function 'COM_PRCAT_FRAG_REL_READ'
      exporting
        iv_category_guid = ls_prd_cat-category_guid
      importing
        et_prcat_frag_rel = lt_cat_frg
      exceptions
        wrong_call        = 1
        others            = 2.
    check sy-subrc = 0.
    refresh lt_settype_guid.
    loop at lt_cat_frg into ls_cat_frg.
      ls_settype_guid = ls_cat_frg-frgtype_guid.
      append ls_settype_guid to lt_settype_guid.
    endloop.
read settype defintions
    call function 'COM_SETTYPE_READ_MULTIPLE'
      exporting
        it_settype_guid = lt_settype_guid
      importing
        et_settype      = lt_settype
      exceptions
        nothing_found   = 1
        others          = 2.
    if sy-subrc = 0.
    only settypes
      et_settype[] = lt_settype[].
      delete et_settype[] where
        ( prod_comp_type = gc_prod_comp_type-extension or
          prod_comp_type = gc_prod_comp_type-simple_extension ).
    only extensions
      delete lt_settype[] where
        ( prod_comp_type ne gc_prod_comp_type-extension and
          prod_comp_type ne gc_prod_comp_type-simple_extension ).
      et_extension[] = lt_settype[].
    endif.
endloop. " end of product categories
endform.                    " load_extensions
*&      Form delete_status
form delete_status
using it_status_guid type comt_prd_status_guid_tab.
data:
    lt_status like crm_jsto_pre occurs 0,
    ls_status type crm_jsto_pre,
    ls_status_guid type crmt_object_guid.
loop at it_status_guid into ls_status_guid.
    ls_status-objnr = ls_status_guid.
    append ls_status to lt_status.
endloop.
call function 'CRM_STATUS_DELETE_MULTI'
    tables
      objnr_table = lt_status.
endform.                    " delete_status
*&      Form delete_favorites
form delete_favorites
     using iv_product_guid type comt_product_guid.
call function 'COM_PRODUCT_DELETE_FAVORITES'
    exporting
      iv_object_guid = iv_product_guid.
endform.                    " delete_favorites
*&      Form delete_clear_case
form delete_clear_case
     using iv_product_guid type comt_product_guid.
data:   ls_customizing type comc_product,
          lv_clear_case_guid type comt_clear_case_guid.
Is cusotmizing-flag INACTIV_PROD activated ?
call method cl_com_product_general=>comc_product_read_all
    importing
      es_prod_general = ls_customizing
    exceptions
      not_found       = 1
      others          = 2.
check ls_customizing-inactive_prod = on.
select single clear_case_guid from comm_clear_targ        "#EC *
           into lv_clear_case_guid
           where object_guid = iv_product_guid "active
             and object_class = 'PROD'.
normaly two entries for active and inaktive product version
delete from comm_clear_targ
           where clear_case_guid = lv_clear_case_guid
             and object_class = 'PROD'.
delete from comm_clear_stack
         where guid = lv_clear_case_guid
           and application = 'PROD'.
endform.                    "delete_clear_case
*&      Form check_usages
form check_usage
     using iv_product_guid type comt_product_guid
changing ev_delete type comt_boolean.
include sbal_constants.
data: cv_function_module like rs38l-name
              value 'COM_PRODUCT_USAGE_CHECK'.              "#EC NOTEXT
data: ls_product type comt_product,
         lt_product type comt_product_tab.
data: ls_logheader     type bal_s_log,   "Kopfdaten des Protokolls
         lv_loghandle     type balloghndl.
data: ls_msg_filter type bal_s_mfil,
         ls_log_filter type bal_s_lfil,
         lt_msg_handle type bal_t_msgh,
         ls_log_handle type bal_s_logh,
         ls_msg_handle type balmsghndl,
         ls_msg        type bal_s_msg,
         ls_string     type string.
does CRM function exist
call function 'FUNCTION_EXISTS'
    exporting
      funcname           = cv_function_module
    exceptions
      function_not_exist = 1
      others             = 2.
check sy-subrc = 0.
create log handle
ls_logheader-aldate    = sy-datum.
ls_logheader-altime    = sy-uzeit - 10.
ls_logheader-aluser    = sy-uname.
ls_logheader-alprog    = sy-repid.
call function 'BAL_LOG_CREATE'
    exporting
      i_s_log                 = ls_logheader
    importing
      e_log_handle            = lv_loghandle
    exceptions
      log_header_inconsistent = 1
      others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ls_product-product_guid = iv_product_guid.
append ls_product to lt_product.
call usage checks
call function cv_function_module
    exporting
      it_product   = lt_product
      iv_loghandle = lv_loghandle.
filter settings
ls_log_handle-sign   = 'I'.
ls_log_handle-option = 'EQ'.
ls_log_handle-low    = lv_loghandle.
append ls_log_handle to ls_log_filter-log_handle.
get messages
call function 'BAL_GLB_SEARCH_MSG'
    exporting
      i_s_log_filter = ls_log_filter
      i_s_msg_filter = ls_msg_filter
    importing
      e_t_msg_handle = lt_msg_handle
    exceptions
      msg_not_found = 1
      others         = 2.
check sy-subrc = 0.
ev_delete = space.
write: / text-001, text-008.
read messages
loop at lt_msg_handle into ls_msg_handle.
    call function 'BAL_LOG_MSG_READ'
      exporting
        i_s_msg_handle = ls_msg_handle
      importing
        e_s_msg        = ls_msg
      exceptions
        log_not_found = 1
        msg_not_found = 2
        others         = 3.
    check sy-subrc = 0.
    message id ls_msg-msgid type ls_msg-msgty number ls_msg-msgno
        with ls_msg-msgv1 ls_msg-msgv2 ls_msg-msgv3 ls_msg-msgv4
        into ls_string.
    write: /, ls_string.
    clear ls_msg.
endloop.
endform.                    " check_usages
*&      Form delete_ibasecomponent
      text
     -->P_GV_PRODUCT_GUID text
form delete_ibasecomponent using p_product_guid.
data: lv_guid22 like sysuuid-c22,
        ls_comp   type ibas_dat1.
tables: ibin.
break pvho.
call function 'GUID_CONVERT'
    exporting
      iv_guid_x16            = p_product_guid
    importing
      ev_guid_c22            = lv_guid22
    exceptions
      no_unicode_support_yet = 1
      parameters_error       = 2
      others                 = 3.
find the component
select * from ibin
         where objnr = lv_guid22.
    clear ls_comp.
    ls_comp-instance = ibin-instance.
    ls_comp-ibase = ibin-ibase.
    call function 'IBASE_COMP_DELETE'
      exporting
        i_comp              = ls_comp
      exceptions
        data_not_consistent = 1
        ibase_locked        = 2
        not_succesful       = 3
        others              = 4.
    if sy-subrc eq 0.
      call function 'IBASE_SAVE'.
    endif.
endselect.
endform.                    " delete_ibasecomponent

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

I cann't get start my iPad. The only thing that appears is a part of a cable pointed to iTunes. ai have reseted many times.

I can't get start my iPad. The only thing that appears is a part of a cable pointed to iTunes. ai have reseted many times.

Make sure the battery is charged, then restore the iPad.
Help here > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

HT3678 Can I Transfer The Windows Registration Key To My Mac for Quicktime Pro?

Can I Transfer The Windows Registration Key To My Mac for Quicktime Pro?

No, the registration is specific, you'll need to get a new one.

Where can I find the product key for Windows 7?

Hi - I recently purchased a laptop from Dixons. Where can I find the product key to start using microsoft 7? I can not find it anywhere.
Please help!

Hello
I believe 90% of Toshiba notebooks you can find on the market are delivered with preinstalled operating system. When you start it for the first time you must NOT activate preinstalled OS. At the bottom of the notebook you can find Windows sticker with valid key license.
Maybe you bought notebook without preinstalled OS. In this case you must install own OS and use own license key.
The question is: which notebook model do you have exactly and was your notebook delivered with preinstalled operating system?
For exact answer please offer more relevant information.

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

I am having the same problem. I did download the two files and started the .exe file. The .exe file appears to run downloading files. When the bar is full the window dissapears without any options. Both files are in the same folder. any thoughts?

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID?

How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
Please help meautomate this process.

You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.

Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.

Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.
After I sign on with email address and password, I am also asked to enter a serial number which I was not given...

Hello,
In order to activate the product should get the following option:-
- Use trial or subscription
- I have a serial number
Please select the option - Use trial or subscription and click next- Restart Acrobat and sign in with your Adobe ID
Also, you may refer to the following for more information on activation issues:- Activation & Deactivation Help
Regards,
Nakul

I can't reactivate windows as i can't read the product key on the bottom of my dv6-1350us

i can't reactivate windows as i can't read the product key on the bottom of my povilion dv6-1350us

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

Can't get started! Can I skip the Product Registration process?

Similar Messages

Maybe you are looking for