Can't get stereo on real guitar track

Hi,
This is driving me nuts! I can't get anything but mono 9from left speaker) when I play my guitar, even though stereo is selected. I am using GB 3.0.4. I have been exchanging files with a friend in another state and he has the same problem with his GB (older version)! I tried different cords and that does not solve the problem. Any ideas?
Thanks

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly

Similar Messages

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

I have an Imac in my bedroom and apple tv hooked to my big screen in my living room. When I select mirror Imac on the Imac to view on the big screen in living room, can I get a wireless keyboard and track pad to control Imac from living room?

I do something like that, and can confirm 20 feet won't be a problem. More than 30 or so might be.

How can I get notified when someone is tracking my iphone

I need to know how to get notified when someone is tracking my iphone?

Have you provided your iCloud ID and password to anyone? You can also go into Settings>Privacy>Location Services>System Services>Status Bar Icon, and that will show the location services icon in the status bar if something is using location services on your device.
However, if you have provided your iCloud ID and password to someone, or you have not acknowledged an invite to Find My Friends, then no one could be tracking you. But if you did provide that information, if someone does log into Find My iPhone, you should get an email at your iCloud ID mail address that someone has logged into Find My iPhone.

Applet is running in simulator but can't get on the real card.. PLEASE HELP

Hi,
I have been able to run my applet succesfully in a simulator, and it tested okay. My problem is that I can't get the sap or cap fil on my real card (gp211pkis)... I have read that it could be becaurse I need to specify a security domain AID...
Please help...
======================= Upload file into a card
CMD: Install for load
-> 80 E6 02 00 0E 09 A0 00 00 00 62 03 01 0C 05 00 00 00 00 00
<- 90 00
18 blocks to load ...
CMD: Load File
-> 80 E8 00 00 CC C4 82 0D AC BA CA CA FE 20 01 1C 63 6F 6D 2E 67 65 6D 70 6C 75 73 2E 65 78 61 6D 70 6C 65 73 2E 6F 70 70 75 72 73 65 09 A0 00 00 00 62 03 01 0C 05 43 66 69 6C 65 3A 2F 44 3A 2F 47 65 6D 70 6C 75 73 2F 47 65 6D 58 70 72 65 73 73 6F 2E 72 61 64 33 2F 65 78 61 6D 70 6C 65 73 2F 47 58 50 32 31 31 5F 50 4B 5F 49 53 2F 4F 50 50 75 72 73 65 2F 6F 75 74 2F 07 4F 50 50 75 72 73 65 0A A0 00 00 00 62 03 01 0C 05 01 00 00 0D 24 1F 8B 08 00 00 00 00 00 00 00 95 58 09 78 54 D5 15 FE EF 9B 35 C9 10 66 80 51 12 12 4C 01 25 4C 02 44 22 3B 06 B3 01 81 90 C4 CC 24 31 48 4D 86 99 17 18 4D 66 E2 2C 21 A8 45 4A A9 D6 2E 96 C8
<- 69 85
*** ??? : OP.error.E8.6985

hello
your install for load command is not correct.
in data field you must specify security domain AID.
for example , issuer security domain AID : A000000003000000
install for load command :
80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 05 08 A0 00 00 00 03 00 00 00 00 00 00
you can use smart card Toolset Pro for sending this command.
in toolset Pro. leave Le field blank.
Best Regards,
siavash

Can't get stereo track to sound stereo...

I recorded audio track in Amadeus Pro as AIFF stereo file, where in L channel is one speaker, and in R channel is another speaker (translator).
I had one mono track in Logic Express 8, and I added another stereo track below it where I imported that AIFF stereo file. I see in the waveform that each speaker speaks in its own channel, but here in Logic in my headphones both speakers sound in the middle. I found that the problem is with the plugins I use in the channel strip - all plugins in the channel strip are mono and mix both channels together. Te keep both speakers separate in their own channels I probably need to separate that stereo track into two independent channel strips - one for each channel. How can I do it? (I use Apogee Duet 2-channel firewire interface.)

Hi Akaxa,
One of my answers will be like the CCT said - direct monitoring. But let´s see....
Can you record the sound and post it to see what sounds like?
Are you connecting your speakers through mac outputs or apogee out´s? What about the phones does it sound the same?
Try this:
In - from the apogee
Out - to apogee out´s and check mic
Out - to apogee phones and check mic
Out - to mac phones and check mic
Does it sound different?
Please post your results.

Can I get iTunes to file ripped tracks in the exact order they were on the CD?

300 years ago, Bach wrote the Well Tempered Clavier "songs" to be played in a certain order. The geniuses at Apple offer lots of options for arranging the ripped tracks in every order except "List tracks in the order they were on the CD". Anyone have any ideas why Apple INSISTS upon destroying this carefully created order? iTunes CD imports are ripped in sequential order, why can't iTunes simply put them in the library in the order they are ripped? To omit this simple and obvious ordering is INCREDIBLY STUPID!! If the option to put CD tracks into the iTunes Library in the order they are ripped exists, but has been hidden by some genius, does anyone know how to find it? Why are programmers so obsessed with giving us "features" that they completely overlook the simple option of "Do not reorder the tracks at all", just store them in the library?
If iTunes is so stupidly designed that it is impossible to leave the order of tracks in the order they were on the CD ripped, is there any way I can reorder the tracks manually so that I can restore the tracks to the order Bach intended? The 3 ripped CDs are (no option) stored in individual folders. Is there a way to put all tracks in a single folder? Does Apple have any "suggestion box", or "bug reporting" input access? I wonder if they are following the modern trend (like Google), who allow no user feedback since they KNOW that THEIR geniuses produce only products that are already PERFECT when released. What colossal arrogance!

"The geniuses at Apple offer lots of options for arranging the ripped tracks in every order except "List tracks in the order they were on the CD". Anyone have any ideas why Apple INSISTS upon destroying this carefully created order?"
They don't. By default iTunes will import tracks and allow them to be viewed as albums in the "correct" order, assuming that the metadata elements used to control grouping into albums are correctly set.
"iTunes CD imports are ripped in sequential order, why can't iTunes simply put them in the library in the order they are ripped?"
Because "the order in which they are ripped" is not a well-defined concept. iTunes groups tracks into albums and orders discs/tracks within albums based on well-defined metadata elements. The issue that you may seeing is that much of the information that iTunes pulls from Gracenote to supply metadata for imported CDs is inconsistent or just plain wrong. Once the metadata is correctly specified, tracks will always be ordered correctly in the iTunes library (assuming sorting by album, disc # and track #).

Can't get Addictive Drums on Inst. track to record.

ok
I just installed Addictive Drums and am having a hard time getting it to record the audio.
I have AD set up on an instrument track and have my drums all set to go, but when I play the beats in the AD window and hit record in Logic it is not recording the information. Am I doing something wrong?
thanks!

tim, only got demo, atm.
very good processing on board.
psp did this bit.
limited choices, atm, but certainly very good quality.
hope they expand the library, then i'll buy in.
best, for me, are the DW kit pieces (listen to kp's on site.)
i like 'em tight, (still talkin' drum sounds.....i think.)
DR9.

How can I get to the real FireFox homepage. I dont google.

I always get the google search page on startup. I have tried "resetting to default" but I am still stuck with google. If I start with the add-on's page I don't get google but I have yet to see the "awesome bar".

'''about:home''' ''is'' the default Homepage in Firefox 4. This - http://www.google.com/firefox - was the Homepage in earlier versions of Firefox.
The "Awesome Bar" has been part of Firefox since Firefox 3, it's not new for Firefox 4. What you see different than the mock-ups is that on WinXP and W2K the Menu bar is the default view, rather than the orange Firefox button. Right-click the Menu bar and click on Menu Bar to de-select it to have the Firefox button show.

Can anybody get me some real time issues?

hi alll gurus,
i am attending the interviews... with ur kindness am able to handle the all the basic level of
subject part. But, they are asking the issues and gap analysis what u have got and cleared?
so that , am requesting to get me some helpful data regarding above things.
am very thankful to u...
hope will get me the above...
regards
vasan

hi arun,
1.Mostly the issues are related to master data.Means the user enters wrong master data such as customer master fields (Eg:-Account assignment group,Tax code,Currency,Dopp etc) due to this processing of sales order gets stuck.
this situation applies to other masters as well like material master,condition master,output master etc.
2.Issues related to outputs :-If you have prepared any Z outputs then the user will ask change in the layout,additional fields in output,Wrong values may show in the outout, New output all together.
3.Issues related to Z reports :- Same as outputs.
4.New routines or userexits might coome in picture because of some specific bussiness reqirement which is not possible to deal with standard SAP.
5.Awareness issues :-This is frquently faced because some new users might not know how to operate the systems.
6.Authorization not provided for the users for a particular transaction.
Normaly the issues we face in support porject are in follwing categories
1.Awareness
2.Modifications
3.New requirement (Functional/technical/Abap)
4.Authorization
pl reward if it helps.
Thanks,
Sadhu Kishore

Soundtrack pro can't export stereo tracks

Ok. I have a problem. I'm recording some stereo cassettes into logic, then cleaning them up in Soundtrack. the editing flow is very usable. now, when I want to save, I have very limited options. Why can't I save as mp3/m4a/etc?? I see that export is what I need. Oh whoops, you can't export from a stereo track. Why?!!!?? Ok, so how do you convert a stereo track to multitrack to export? I could pretty much move completely over from Audition if I could figure this out. Help? I can't be the only one editing stereo masters in STP?

ok, how can I import stereo into two mono tracks? can files be moved from edit mode stereo into multitrack?

Where can I download the first guitar lesson. It is supposed to come preinstalled but I don't have it. How can I get it?

One of the reasons I upgraded to GarageBand 11 was that I wanted to use the tutorials and the free lessons. But although I've been able to download all the free tutorials, I am missing the first one that is supposed to come preinstalled. Can somebody tell me where or how can I get the "Intro to guitar lesson" that I am missing?

I have this problem as well. All the other lessons are there, but not the first one. I see 5 or 6 threads here about this but no replies. What's the deal?

No Sound From SOME Real Instrument Tracks

All tracks (real, software & guitar) are recording properly and play back is fine. Then out of the blue a previously recorded real instrument track will not play back. Software tracks are playing and "blue" drum loops are playing back back, but not real bass or real guitar tracks.
The wave files are there and the activity is visible. The volume meters are moving, but there is no sound. The track is not muted and no tracks are in solo mode.
I can copy and paste the tracks and they play again, BUT they loose quality and all of the sequencing, as far as where the region sits in the song, is lost.
Any one know how to fix this?
Thanks in advance.

BobbyQ3 wrote:
your suggestion to toggle the Ducking WORKED. I'm back in business! THANK YOU VERY MUCH.
you're welcome, enjoy

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

Can't get CDDB to work

Hi all. Recei'ved a Zen Xtra 30GB for Christmas yesterday. So far it seems really awesome. The only problem is I can't get Mediasource Organizer to access track and artist info for the CDs I put into my disc dri've. Obviously, it is a big pain to manually enter in artist and track info. I know how to tell the software to "get info"...it just keeps telling me to register for CDDB, again and again and again. I do it, and nothing happens. I click "get info" again and it has me register again. It tells me "you are done" and nothing changes. I have already re-booted and also downloaded various updates for my player and software off of Creative's website. Please help me!!!
Thanks in advance.

Thanks for referring me to the proper page. I tried this (after a little searching, the directory I have my files in is different than the one listed, for some reason... I couldn't get the third file to work either, for some reason), and it did work! So now I am happily enjoying easy ripping on my Zen Xtra! Thanks a ton!

Can't get stereo on real guitar track

Similar Messages

Maybe you are looking for